$500 - $750, Bacharach

0011-7032 Fyrite CO2 Indicator (0-20%) by Bacharach

Fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite Analyzers are available for either CO2 or O2 analysis, and each model is produced in three scale ranges.

All six instruments are similar in appearance and size, but differ in important construction details, as well as in the absorbing fluids.

Each model, therefore, is suitable only for the particular gas analysis or scale range for which it has been manufactured. Accuracy is within ±1/2% CO2 or 02.

Operation

Fyrite absorbing fluid is selective in the chemical absorption of carbon dioxide or oxygen, respectively. Therefore, the Fyrite's accuracy, which is well within the range required for industrial and professional applications, does not depend upon complicated sequential test procedures. In addition, Fyrite readings are unaffected by the presence of most background gases in the sample.

The number of tests possible with one fluid charge depends on the concentration of samples being tested. At midpoint scale reading the CO2 fluid is good for approximately 300 gas samples and the O2 fluid for 100 tests. The need to replace fluid can be easily determined with a simple test, and replacement is an easy procedure. These test procedures, as well as other good information, are provided in the Fyrite manual 11-9026.

Features

Fyrite Indicators have a broad range; they may be exposed to ambient temperatures from -30° to 150°F, and gases up to 850°F may be tested with standard aspirator sampling equipment (special sampling equipment for higher gas temperatures or dry gases is available). Order Fyrite Instruction Manual 11-9026. For temperatures above 1400°F, a ceramic sampling tube (Bacharach Part # 11-0164) is available.

Applications

• 0-7.6% CO2 – CO2 tests of controlled atmospheres in fruit, vegetable, meat storage rooms, and incubator monitoring.
• 0-7.6% O2 – Oxygen determination in flammable gases; oxygen tests to check inertness of atmosphere in silos, fuel tanks, etc.
• 0-20% CO2 – Flue gas combustion tests; CO2 tests of heat treating atmospheres.
• 0-21% O2 – Flue gas combustion tests, oxygen deficiency test. Checking oxygen concentrations in hydrogen cooled generators and oil sealed inert gas transformers.
• 0-60% CO2 – Checking CO2 in inert gas blankets in tankers and barges carrying gasoline and other combustibles; CO2 tests on lime kilns; checking CO2 in sewage plant digesters.
• 0-60% O2 – Oxygen test in connection with oxygen and gas anesthesiology.

0010-5001 Fyrite CO2 Testing Indicator (0-20%), sampling assembly and carry case (NO FLUID - FOR EXPORT) by Bacharach

Fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite Analyzers are available for either CO2 or O2 analysis, and each model is produced in three scale ranges.

All six instruments are similar in appearance and size, but differ in important construction details, as well as in the absorbing fluids.

Each model, therefore, is suitable only for the particular gas analysis or scale range for which it has been manufactured. Accuracy is within ±1/2% CO2 or 02.

Operation

Fyrite absorbing fluid is selective in the chemical absorption of carbon dioxide or oxygen, respectively. Therefore, the Fyrite's accuracy, which is well within the range required for industrial and professional applications, does not depend upon complicated sequential test procedures. In addition, Fyrite readings are unaffected by the presence of most background gases in the sample.

The number of tests possible with one fluid charge depends on the concentration of samples being tested. At midpoint scale reading the CO2 fluid is good for approximately 300 gas samples and the O2 fluid for 100 tests. The need to replace fluid can be easily determined with a simple test, and replacement is an easy procedure. These test procedures, as well as other good information, are provided in the Fyrite manual 11-9026.

Features

Fyrite Indicators have a broad range; they may be exposed to ambient temperatures from -30° to 150°F, and gases up to 850°F may be tested with standard aspirator sampling equipment (special sampling equipment for higher gas temperatures or dry gases is available). Order Fyrite Instruction Manual 11-9026. For temperatures above 1400°F, a ceramic sampling tube (Bacharach Part # 11-0164) is available.

Applications

• 0-7.6% CO2 – CO2 tests of controlled atmospheres in fruit, vegetable, meat storage rooms, and incubator monitoring.
• 0-7.6% O2 – Oxygen determination in flammable gases; oxygen tests to check inertness of atmosphere in silos, fuel tanks, etc.
• 0-20% CO2 – Flue gas combustion tests; CO2 tests of heat treating atmospheres.
• 0-21% O2 – Flue gas combustion tests, oxygen deficiency test. Checking oxygen concentrations in hydrogen cooled generators and oil sealed inert gas transformers.
• 0-60% CO2 – Checking CO2 in inert gas blankets in tankers and barges carrying gasoline and other combustibles; CO2 tests on lime kilns; checking CO2 in sewage plant digesters.
• 0-60% O2 – Oxygen test in connection with oxygen and gas anesthesiology.

6600-8000 MGS-550 Safety Compliance Gas Detector - IP66, 5-digit LED (consentration level), Analog and (3) Relay Outputs, Modbus by Bacharach

Bacharach's MGS-550 leak detector combines electrochemical, semiconductor, catalytic bead and infrared sensors into one platform to support leak detection for the new low GWP (Global Warming Potential) refrigerant blends as well as natural refrigerants to enable gas leak detection in the often harsh environments of industrial refrigeration.

The MGS-550 can easily be integrated into any building management system (BMS). The Modbus RTU interface allows the user to program and configure the unit remotely through the BMS. Remote access gives complete control to the user when using Modbus. Alternatively, electrical current or volt analog output provides an industry standard reading using 4-20mA.

Having three integrated relays within each instrument reduces the need for having to wire alarm devices back to a central control system. Because of the integrated relays, the Bacharach MGS-550 can be operated as a stand-alone system. Each relay can be individually programmed to trigger alarm devices and actions separately or as a redundant system.

The straightforward menu structure is identical regardless of the type of sensors used, reducing the costs and amount of time for training required upon installation or during maintenance.

Bacharach's MGS-550 offers the flexibility of adding a second sensor at any point in time without the need for any additional controllers. Any sensor can be remotely mounted from the main instrument to a distance of 5 meters or 15 feet. It meets the requirements of EN 378 and ASHRAE 15.

Features

• One or two sensor capability
• Remote sensor capabilities
• Analog and digital interface
• On-board relays
• Magnetic wand
• Status indicator and LED display
• Optional MGS-408 Controller

Benefits

• Detects two gases and/or in two locations with one instrument
• Flexible placement in hard to reach areas
• Ease of integration with multiple control devices
• Connects to local alarm devices for saving costs on installation
• Non-intrusive configuration and calibration
• Provides at-a-glance status overview and comprehensive direct user interface
• Create an independent, centralised alarm system with up to 6 gas detectors

5201-1031 GDC-150 Gas Sensor Transmitter, NEMA 1 Housing, MOS Refrigerant Sensor by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

0019-7051 Leakator 10 Combustible Gas Leak Detector with hard carrying case and instruction manual by Bacharach

The MSA Bacharach Leakator® 10 is an ideal instrument for pinpointing combustible gas leaks in a number of residential, commercial and industrial applications, including gas pipeline surveying and valve, regulator or gas meter inspection. It uses a long-life (5 years typical) sensor and is easy to operate with one hand, giving you a reliable, easy-to-use tool.

The Leakator® 10 has a long, flexible neck for detecting leaks in hard-to-reach areas. The bright LED scale shows relative leak sizes, and a manual balance feature finds leaks in backgrounds where the target gas is present. It is UL 913 certified for hazardous locations, and carries a 1 year warranty that includes the sensor.

Features

• Semiconductor Sensor Technology
• Exchangable Sensor Located in Probe Tip
• 20 Inch Probe
• Visual and Audible Leak Indicators

Benefits

• Detects all combustible gases
• Allows for ultimate sensitivity, fast response, and easy replacement
• Allows for leak detection in hard-to-reach areas
• Shows leak intensity through audible tick rate or visual LED scale

0024-1652 Oxygen (O2) sensor by Bacharach

The O2 sensor is used in Bacharach portable combustion analyzers to measure the percentage content of oxygen levels in flue gases. The range of the oxygen sensor is 0 – 20.9%. O2 measurement is used in conjunction with the chosen fuel to calculate the CO2 levels in flue gases. Bacharach portable combustion analyzers only calculate CO2 when oxygen levels are below 16%. Bacharach uses O2 and other readings in determining efficiency rather than CO2 for a more accurate measurement. Measuring oxygen content in the excess air lets you know if you have too much air or too much fuel, allowing you to tune your furnace or boiler to maximum efficiency. Measuring O2 directly can save fuel, and save time during a combustion tune-up test.

• Measures percentage content of oxygen levels in flue gas
• Provides more accurate efficiency readings
• Saves time during tune-ups, telling you if air or fuel is too high
• Available in two year, three year, and five year sensor life depending on instrument

6500-1105 MGS-350 Gas Detector, R407a 0-1,000 ppm Standard Housing by Bacharach

Bacharach's MGS-350 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, TVOC and toxic gases. It comes standard with analog and digital outputs including 4-20 mA, 0-5V, 0-10V and Serial Data, allowing them to connect directly to most BMS, SCADA or control systems. An onboard visual LED alarm indicator alerts area personnel when levels have exceeded the desired limit. The MGS-350 also features alarm relays (high and low) for connection to external audible/visual alarms or a BMS or BAS system.

MGS-350 Gas Transmitters, combined with the MGS Controller, can provide facility owners with a customized and complete low-cost gas-detection system. A variety of housing options are available (shown below), from standard to water resistant enclosures, which allow the MGS-350 units to be placed in many environments.

Features & Benefits:

• Detects refrigerants (CFCs, HFCs, HCFCs), TVOCs, combustible gases/hydrocarbons, O2, NH3, CO, H2S, H2, NO, NO2, SO2, Cl2, and O3
• Long-lasting infrared, semiconductor, catalytic bead and electrochemical sensor options for effective leak detection - at the most affordable cost.
• Precalibrated replacement sensors for easy maintenance
• Integrated visual LED alarm
• Two onboard alarm relays (low and high)
• Multiple housing options available, including IP 66 and duct mount, for placement in diverse environments.
• Analog outputs: 4-20 mA, 0-5V, 0-10V, featuring 12/24 VAC / 12-30VDC operation

6302-2171 MGS-450 Gas Detector - IP66, 3 x Relays, Analog Output, Modbus Output, Audible & Visual Alarms - R454B, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

6302-2101 MGS-450 Gas Detector - IP66, 3 x Relays, Analog Output, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

0010-5012 Fyrite O2 Testing Indicator (0-21%), sampling assembly and carry case (NO FLUID - FOR EXPORT) by Bacharach

Fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite Analyzers are available for either CO2 or O2 analysis, and each model is produced in three scale ranges.

All six instruments are similar in appearance and size, but differ in important construction details, as well as in the absorbing fluids.

Each model, therefore, is suitable only for the particular gas analysis or scale range for which it has been manufactured. Accuracy is within ±1/2% CO2 or 02.

Operation

Fyrite absorbing fluid is selective in the chemical absorption of carbon dioxide or oxygen, respectively. Therefore, the Fyrite's accuracy, which is well within the range required for industrial and professional applications, does not depend upon complicated sequential test procedures. In addition, Fyrite readings are unaffected by the presence of most background gases in the sample.

The number of tests possible with one fluid charge depends on the concentration of samples being tested. At midpoint scale reading the CO2 fluid is good for approximately 300 gas samples and the O2 fluid for 100 tests. The need to replace fluid can be easily determined with a simple test, and replacement is an easy procedure. These test procedures, as well as other good information, are provided in the Fyrite manual 11-9026.

Features

Fyrite Indicators have a broad range; they may be exposed to ambient temperatures from -30° to 150°F, and gases up to 850°F may be tested with standard aspirator sampling equipment (special sampling equipment for higher gas temperatures or dry gases is available). Order Fyrite Instruction Manual 11-9026. For temperatures above 1400°F, a ceramic sampling tube (Bacharach Part # 11-0164) is available.

Applications

• 0-7.6% CO2 – CO2 tests of controlled atmospheres in fruit, vegetable, meat storage rooms, and incubator monitoring.
• 0-7.6% O2 – Oxygen determination in flammable gases; oxygen tests to check inertness of atmosphere in silos, fuel tanks, etc.
• 0-20% CO2 – Flue gas combustion tests; CO2 tests of heat treating atmospheres.
• 0-21% O2 – Flue gas combustion tests, oxygen deficiency test. Checking oxygen concentrations in hydrogen cooled generators and oil sealed inert gas transformers.
• 0-60% CO2 – Checking CO2 in inert gas blankets in tankers and barges carrying gasoline and other combustibles; CO2 tests on lime kilns; checking CO2 in sewage plant digesters.
• 0-60% O2 – Oxygen test in connection with oxygen and gas anesthesiology.

0011-7036 Fyrite O2 Indicator (0-21%) by Bacharach

Fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite Analyzers are available for either CO2 or O2 analysis, and each model is produced in three scale ranges.

All six instruments are similar in appearance and size, but differ in important construction details, as well as in the absorbing fluids.

Each model, therefore, is suitable only for the particular gas analysis or scale range for which it has been manufactured. Accuracy is within ±1/2% CO2 or 02.

Operation

Fyrite absorbing fluid is selective in the chemical absorption of carbon dioxide or oxygen, respectively. Therefore, the Fyrite's accuracy, which is well within the range required for industrial and professional applications, does not depend upon complicated sequential test procedures. In addition, Fyrite readings are unaffected by the presence of most background gases in the sample.

The number of tests possible with one fluid charge depends on the concentration of samples being tested. At midpoint scale reading the CO2 fluid is good for approximately 300 gas samples and the O2 fluid for 100 tests. The need to replace fluid can be easily determined with a simple test, and replacement is an easy procedure. These test procedures, as well as other good information, are provided in the Fyrite manual 11-9026.

Features

Fyrite Indicators have a broad range; they may be exposed to ambient temperatures from -30° to 150°F, and gases up to 850°F may be tested with standard aspirator sampling equipment (special sampling equipment for higher gas temperatures or dry gases is available). Order Fyrite Instruction Manual 11-9026. For temperatures above 1400°F, a ceramic sampling tube (Bacharach Part # 11-0164) is available.

Applications

• 0-7.6% CO2 – CO2 tests of controlled atmospheres in fruit, vegetable, meat storage rooms, and incubator monitoring.
• 0-7.6% O2 – Oxygen determination in flammable gases; oxygen tests to check inertness of atmosphere in silos, fuel tanks, etc.
• 0-20% CO2 – Flue gas combustion tests; CO2 tests of heat treating atmospheres.
• 0-21% O2 – Flue gas combustion tests, oxygen deficiency test. Checking oxygen concentrations in hydrogen cooled generators and oil sealed inert gas transformers.
• 0-60% CO2 – Checking CO2 in inert gas blankets in tankers and barges carrying gasoline and other combustibles; CO2 tests on lime kilns; checking CO2 in sewage plant digesters.
• 0-60% O2 – Oxygen test in connection with oxygen and gas anesthesiology.

0019-8200 Tru Pointe IR Refrigerant Leak Detector with probe, battery, AC & DC chargers, protective rubber boot w/magnet, 9 in. flexible probe extension and rigid needle probe (1/ea), 5 filters, 5 O-rings, instruction manual and hard carrying case by Bacharach

MSA Bacharach's Tru Pointe® IR is a handheld refrigerant leak detector that utilizes a long-life infrared sensor to locate and pinpoint leaks containing CFC, HFC, HCFC and HFO-1234yf refrigerants. Accurate detection with rapid response times, a long-running rechargeable battery and a lightweight design deliver superior performance in a compact size.

The Tru Pointe® IR is designed to meet SAE J2791 and J2913 leak detection standards and its infrared sensor is engineered to provide a minimum of 10 years of dependable performance. The instrument can automatically recalibrate in highly contaminated areas to help pinpoint the exact location leaks and will not trigger on oil or moisture. It's easily transported and stored, along with chargers, probe extensions and accessories, in a durable, hard-shell carrying case.

Features

• Advanced infrared technology
• Compact size and 15.5" (39.4 cm) flexible probe
• Three levels of sensitivity
• LED bar graph display
• Auto-recalibration in contaminated areas
• Vibrant visual and audible alarms
• Rechargeable lithium ion battery
• Rugged housing

Benefits

• Detects CFC, HFC, HCFC and HFO-1234yf refrigerants with powerful accuracy
• Easy portability and targeted detection capability
• Detection from 0.5 to 0.15 oz./yr.
• Peak reading and low battery indicators
• Better pinpointing of leaks
• For noisy environments (with one-touch muting)
• AC wall adapter and DC cigarette lighter charger included
• With protective rubberized boot and magnetic clip