$2000 - $4000, BW Technologies Monitors

HU-X1W1H1M1B1-Y-N BW™ Ultra 5-Gas Detector (O2, LEL, H2S, CO, CO2 IR) with Pump, Yellow Housing by BW Technologies

At Honeywell, we always put your safety where it should be first. With Honeywell BW™ Ultra, our new portable five-gas detector, you will be able to do the same for your workers. Designed specifically for sampling and monitoring confined spaces, before and after entry, Honeywell BW™ Ultra has enhanced sensor technology, visibility on gas readings, comfort, and connectivity. This makes it the most reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.
The Honeywell BW™ Ultra complies with all safety regulations in place by detecting your required gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the market to feature the 1?Series sensor, with fast response, reliable performance and long life, even in extreme working conditions. That means high accuracy and lower costs.

Features & Benefits

Ultra Easy

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance

Ultra Visibility

• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance

Ultra Rugged

• Honeycomb-designed housing for extra ruggedness
• Protection designed in the right place
• Scratch-resistant display protector

Ultra Connected

• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting

Ultra Comfortable

• Ergonomically designed for easy use
• Light yet rugged design
• Fits in the hand for easy sampling

Ultra Quick

• Quick responding sensor technology
• Quick decision making because large display
• Quick bump & calibration with IntelliDoX system

Part Number: HU-X1W1H1M1B1-Y-N

QT-XWHM-R-Y-NA-CS GasAlertQuattro Premium Confined Space Kit with Instrument and Calibration Gas

If do not already own the standard four gas version of the GasAlertQuattro and are also in need of the confined space kit, then this is the best version to order.

Why?

The short answer is that it is easier and faster.

Unlike the Deluxe Confined Space Kit version (QT-CK-DL) which doesn't include the instrument or calibration gas, this version includes both. No need to order a separate monitor and separate calibration gas cylinder. The monitor is the standard CO,H2S,O2,LEL configuration, and the calibration cylinder that comes with it is the CG-Q34-4 which contains 100PPM CO, 25 PPM H2S, 18%/Vol O2, and 50% LEL CH4 (Methane). The reason there are two different confined space kits is that the Deluxe Confined Space Kit (QT-CK-DL) was designed for customers that already own the monitor and need to add the kit as an after market purchase, or customers that are purchasing a configuration other than the standard four gas.

What is included?

• QT-XWHM-R-Y-NA Rechargeable GasAlertQuattro with CO(Carbon Monoxide), H2S(Hydrogen Sulfide), O2(Oxygen), and LEL(Methane) sensors
• CG-Q34-4 Calibration cylinder
• REG-0.5 Regulator - 0.5 Liters per minute flowrate
• Rugged Aluminum Carrying Case
• Wall Charging Adaptor
• Auxiliary Filter Kit
• Calibration cap with 1 foot of tubing
• IR Connectivity Kit with Fleetmanager II software
• Manual Aspirator Kit
• Sampling Probe
• Both Rechargeable and Alkaline battery packs for greater versatility

Part Number: DOCK2500G

Greater performance with more options for your gas detecting equipment fleet

With IntelliDox systems, you enjoy the benefits of smart docking technology with your Fleet Manager II software program. Compatible units can easily be managed and tracked automatically, to increase overall efficiency.

Instrument management made easy

It won't take long to install the new IntelliDox smart docking system. In fact, the entire installation process takes a couple of minutes or less. Because each module can be operated separately (with separate operating systems, pumps, and readout screens) you can multi-task. For example, it is possible to bump test 2 detectors while you perform calibration on 3 detectors.

Flexibility at your fingertips

Many of the IntelliDox parameters are simple to set, including the high and low alarm set points. This ensures that your gas detectors will never let you down during their entire service lives.

Network and track your data efficiently and conveniently

With both Ethernet and USB options, you can easily store bump testing and peak exposure data.

• Maintenance free detectors - new customizing options
• Track workers and control set points for alarms
• Add on to your docking system (up to 5 modules total)
• Fast and simple setup

Compatibility

BW Clip Series
GasAlertMicroClip Series
ConneX1

Unmatched Bump Testing Performance

Thanks to FastBump, it takes very little time to take care of all bump testing compliance issues. Efficient and economical system saves on test gas and optimizes the entire process

IntelliDoX Features:

• Bump tests, configuration, calibrating, and record-keeping support for compatible units. These settings are user updatable: Schedule Calibration Reminders and Bump Tests; Update Firmware; Gas level Reading Display During Alarm; Event Logs Transfer; Alarm Settings; Enable/Disable Non-compliance Indicator; Hibernation; Preferences for Time Display
• Simple Ethernet network connecting
• Gang as many as 5 modules - each unit has keypad and LCD screen for independent use
• Best FastBump test in the industry. Saves on gas and eliminates bottleneck issues
• No tools needed for setup
• No need for network access to configure or transfer data, thanks to USB port
• Span calibration and bump tests is automatic

IntelliDoX Specs

Size (One module): 5.4 in (13.8 cm) width - 14.2 in (36.2 cm) height - 4.3 in (10.9 cm) depth
Power supply: 12 volt / 8.33A ITE Power Supply
Weight: 4.2 pounds (1.91 kg)
Real-time clock: Date & time stamp
Communications method: Detector and docking module have 2-way (infrared) communication capabilities

External interface

• Ethernet port - 1
• USB port - 1

Menu navigation

• Adjust display settings
• Adjust date & time
• Configure gas inlets
• Review IntelliDoX module
• Password protection (optional)
• Configure UI display language: English, German, Portuguese, Spanish, French

Automatic tests

• Standard bump test: takes 10 seconds
• Fastbumpump: takes 40 seconds

Data Storage: 2 GB internal storage capacity

Pump

• Independent pump for each IntelliDoX module
• Flow Rate is 350 ml/min

Instrument Management System: Fleet Manager II (4.0 and higher)

Ratings: This device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) Each device may not cause harmful interference, and (2) Each device must accept interference received (including any interference causing undesired operation).

Warranty: Full two years

Options and Accessories

Fully Portable Kit for IntelliDoX test station - comes with a Pelican case. Each kit contains: two docking modules, AC power adaptor, demand flow regulator, ethernet cable, tubing and more.

Multi-Inlet Key

You can configure a single IntelliDoX module to connect multiple calibration gases

A complete list of accessories and kits is available.

DUE TO PRODUCT IMPROVEMENT AND ONGOING RESEARCH, SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.

Part Number: DX-MCLP

M5IR-XWBY-R-D-D-Y-N-00 GasAlertMicro 5 IR Detector CO2 (IR), %LEL, O2, H2S, CO - NiMH Battery and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5IRXWBYRDDYN00

Part Number: DOCK201C1N00G

HU-00000000W4-Y-EBW Ultra Detector LEL IR - Europe

At Honeywell, we always put your safety where it should be first. With Honeywell BW™ Ultra, our new portable five-gas detector, you will be able to do the same for your workers. Designed specifically for sampling and monitoring confined spaces, before and after entry, Honeywell BW™ Ultra has enhanced sensor technology, visibility on gas readings, comfort, and connectivity. This makes it the most reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.
The Honeywell BW™ Ultra complies with all safety regulations in place by detecting your required gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the market to feature the 1?Series sensor, with fast response, reliable performance and long life, even in extreme working conditions. That means high accuracy and lower costs.

Features & Benefits

Ultra Easy

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance

Ultra Visibility

• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance

Ultra Rugged

• Honeycomb-designed housing for extra ruggedness
• Protection designed in the right place
• Scratch-resistant display protector

Ultra Connected

• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting

Ultra Comfortable

• Ergonomically designed for easy use
• Light yet rugged design
• Fits in the hand for easy sampling

Ultra Quick

• Quick responding sensor technology
• Quick decision making because large display
• Quick bump & calibration with IntelliDoX system

Part Number: HU-00000000W4-Y-E

Simplicity in operation
Dependable and gives more protection
Made for confined spaces
Enhanced safety protection

Honeywell BW™ Ultra – Detects 5 Gases

Specially Made for Confined Area Gas Detection

Safety is the most important consideration for your workers, and at Honeywell, we take safety very seriously. When you purchase the Honeywell BW™ Ultra, you have some of the best equipment for monitoring worker safety. Your Honeywell BW™ Ultra can monitor gases and take samples in the tightest of spaces. You enjoy important features like innovative sensor design, better connectivity, more comfort, with an easy to read screen. Enhanced durability gives you a safer place to work.

Are you looking for a portable gas monitor for checking out confined space? If so, you should consider the pumped Honeywell BW™ Ultra for these reasons:

• Permits and regulations compliance
• You and your crew can safely enter confined areas with confidence.
• Protect everyone in your organization from dangerous gas levels.

Why the Honeywell BW™ Ultra?

• Enhanced reliability thanks to 1-Series sensor capability
• Monitor gases remotely
• Better performance with enhanced features.

Important Features of the Honeywell BW™ Ultra

• Remote monitoring advantage
• Enhanced awareness for all situations involving dangerous gases
• TouchConnect™ lets you easily manage all your instruments
• Bigger and better LCD screen for checking out gases
• Better reliability thanks to the 1-Series sensor feature.

The Honeywell BW™ Ultra has a pump which is always running. This feature lets you take in gases, read gas levels and sample gases quickly and easily. The simple operation makes it a breeze to use

Do you want the most effective gas detection with the easiest to read and understand features?

Get ready for a new experience

If you need to monitor gases for confined spaces, you have to be extremely vigilant and constantly keep track of the atmospheric gases. The Honeywell BW™ Ultra is an easy to use detector with an easy to read screen so you can check gas levels quickly.

Portable and Durable

Your Honeywell BW™ Ultra is extremely tough and durable and is made for extreme conditions. For example, its IP66/68 rating ensures your detector is completely resistant to dust. It can withstand water submersion to a depth of nearly four feet. Drop it, and it is still working. Take it into the dustiest areas, and you have no problems with your instrument. You can detect hazardous gases with a high degree of confidence.

The Importance of Ergonomics on the job

Today most companies are concerned about ergonomics. It is important for sitting at desks but just as important are the instruments you hold in your hand. Our handheld equipment is comfortable and easy to operate as you check out the atmosphere. The Honeywell BW™ Ultra is a perfect fit for your hand. It is slimmer than most detectors. This helps to eliminate fatigue and increase worker comfort.

Just One Button

Operation is fast and simple. You only need to use one button with the Honeywell BW™ Ultra. It is also possible to wear your gas detector as you check out confided area atmospheres. It goes where you go, and the internal pump design means no snagging.

5 Sensor Power for Detecting Hazardous Gases

Here are the most common gases your Honeywell BW™ Ultra can detect and monitor in tight spaces:

• (CO) carbon monoxide
• (O2) oxygen
• (H2S) hydrogen sulfide
• (LEL) lower explosive limit gases – percent volume or percent LEL

5th sensor – this lets you decide which fifth gas you want to add to your detector. For example, maybe you want to include chlorine or ammonia. You may need to keep track of VOCs. If you are in the pulp and paper, water treatment, or chemical industries, the option of adding gases is very important. This is especially important in the O&G industries too.

Honeywell BW™ Ultra lets you monitor unsafe situations so you can make the right decision quickly and without hesitation.

Are you looking for increased production and enhanced safety? The Honeywell BW™ Ultra can make this happen. Here is an example:

Suppose your crew is working in confined spaces and the possibility of O2 level increases means a higher chance of fire or explosion. Keep a crew member outside the area with his Honeywell BW™ Ultra monitor in hand. He can keep a close eye on conditions because the Honeywell BW™ Ultra is so easy to use and read.

This is a perfect example or being proactive on your personal safety issues.

With high-risk work you need more than simple gas monitoring

Don't be afraid to use your Honeywell BW™ Ultra wherever you need it. Yes, it is designed and manufactured for gas detection in confined areas. However, it performs just as well in day-to-day work situations, with the help of the mobile phone app – Honeywell Safety Communicator.

Do you need to monitor the air in high-risk areas?

The Honeywell BW™ Ultra with the Honeywell Safety Communicator is Bluetooth compatible. You can monitor gases remotely from a wide range of areas including control rooms and offices. This gives you more protection from emergency situations involving gas hazards in the air.

The Value of "Hole Watch" Mode

In some areas, you need constant air gases monitoring to keep your workers safe from harm. For example, how many parts per million (PPM) is safe? Here is the easiest way to solve this issue. Set your Honeywell BW™ Ultra to "Hole Watch".

What Does "Hole Watch" Do?

With Hole Watch you can keep a close eye on specific gases in the air. For instance, if chlorine levels are getting higher, you can take the necessary steps to correct the problem or evacuate your crew. You'll see each gas level in real-time, and you can check the levels as they rise and fall before your eyes.

Watch gas levels increase or decrease – only with Honeywell detectors

Your gas monitoring person is the most important crew member you have. When you give him the Honeywell BW™ Ultra, he has the best possible equipment for the job.

Enjoy the most dependable and well-made sensor technology

Your Honeywell BW™ Ultra comes with the 1-Series sensor, and this technology was the result of a mutual effort by Honeywell and City Technology (a well-known worldwide gas sensor maker for the past 40 years). The 1-Sensor is part of a line of some of the finest sensors in industry like the 40XV from our GasAlert models and the City 40xLL O2 sensor which you will find in the GasAlertMicroClip X3. With this kind of pedigree, you can trust our 1-Sensor.

Are you tired of alarms when you don’t really need them?

Some of the best things are small and compact, and this is true with the 1-Sensor. Even though it is not large, it delivers accurate measurements on a consistent basis. Do you work in very warm or cold conditions?  The 1-Sensor in our Honeywell BW™ Ultra has been tested in conditions as hot as 60C and cold as -40C. This includes high humidity levels, transient pressure, and other extreme conditions.

As Many as Five Years of Continuous Service

If you owned other detectors besides Honeywell models, you probably noticed they can go through sensors rather quickly. In fact, you may spend a lot of company time and resources on sensor changes. This does not happen with the Honeywell BW™ Ultra (1-Series sensor technology). It can last as long as 60 months (5 years), and you receive a 3-year warranty.

This gives you better performance at a lower cost.

Do you want to streamline your maintenance? The Honeywell BW™ Ultra is the equipment for you with low-cost downtime reduction.

No Hassle Calibrating and Bump Testing

How often do you need to calibrate or bump test? With most detectors, you have to take them to your docking station. Yet, if you use TouchConnect™ technology bump tests and calibration can be automatic – no docking station required.

Do you manage a fleet of gas detectors?

You may need to reset gas alarms for specific gases. Use your TouchConnect™, and this job is done for you with no problems and no hassles. This is the perfect solution to managing your time and detectors. You don't have to use special software programs or docking stations. For those with large fleets of instruments, this is a "no brainer". No manual updates thanks to Bluetooth.

Tight spaces – No problem for this 5-gas detector

How many gas hazards must you monitor at one time? Your Honeywell BW™ Ultra can handle most typical gases you face each day in the workplace. This includes carbon monoxide, oxygen, LEL, and hydrogen sulfide. Do you need a fifth gas detection property? The Honeywell BW™ Ultra can do this. For instance:

Hydrogen Sulfide

Chlorine

Carbon Dioxide

Ammonia

Hydrogen Cyanide

VOCs

Inert Atmosphere Problems Solved

The Honeywell BW™ Ultra has a special Intelligent Inert function which lets the user check for low O2 levels in the air. It can adjust the alarm settings automatically no matter if you are in a normal or inert atmosphere. For example, an ascending alarm is needed for inert environments but not for standard environments.

More than Just a Confined Space Gas Monitor

Your Honeywell BW™ Ultra works perfectly in most confined areas. However, you have the same high-quality protection in all kinds of possible hazardous conditions.

For example, after using it for tight spaces, you can also use it for other areas, and it works just as well. Are some of your workers close to sources of deadly chlorine gas? Maybe some people must use solvents or paints during the day. Your Honeywell BW™ Ultra has a removable sampling hose. Just take it out, and you can wear it as a standard gas monitor. This helps to keep equipment costs down while maintaining safety.

The Honeywell BW™ Ultra – keeping your crew safe as well as your facility

When you need the best source for safety equipment and protection in hazardous conditions, Honeywell Industrial Safety is there for you. We help you protect the lives of your employees in a number of dangerous conditions. With Honeywell, your safety risks go down, and they even become an important advantage because you can lower safety equipment costs while increasing efficiency.

Honeywell is the leading producer of industrial safety products and technologies. Do you need head protection, protection from falls, or many other types of equipment? We offer both portable and fixed solutions to your needs. Check out the Honeywell BW™ Ultra today for the best in real-time hazardous gas technologies.

Part Number: HU-X1W1H1M1Q1-Y-N

DOCK2-2-1C1M-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMax XT II Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1M00G

Part Number: DOCK2300G

HU-X1W1H1M100-Y-N BW™ Ultra 4-Gas Detector (O2, LEL, H2S, CO) with Pump, Yellow Housing by BW Technologies

At Honeywell, we always put your safety where it should be first. With Honeywell BW™ Ultra, our new portable five-gas detector, you will be able to do the same for your workers. Designed specifically for sampling and monitoring confined spaces, before and after entry, Honeywell BW™ Ultra has enhanced sensor technology, visibility on gas readings, comfort, and connectivity. This makes it the most reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.
The Honeywell BW™ Ultra complies with all safety regulations in place by detecting your required gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the market to feature the 1?Series sensor, with fast response, reliable performance and long life, even in extreme working conditions. That means high accuracy and lower costs.

Features & Benefits

Ultra Easy

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance

Ultra Visibility

• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance

Ultra Rugged

• Honeycomb-designed housing for extra ruggedness
• Protection designed in the right place
• Scratch-resistant display protector

Ultra Connected

• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting

Ultra Comfortable

• Ergonomically designed for easy use
• Light yet rugged design
• Fits in the hand for easy sampling

Ultra Quick

• Quick responding sensor technology
• Quick decision making because large display
• Quick bump & calibration with IntelliDoX system

Part Number: HU-X1W1H1M100-Y-N

High performance gas protection you can customize

IntelliDoX smart docking is the perfect complement to Fleet Manager II software. With two proven winners working together, you get the benefits of an "all-star"; team, to take care of your detector fleet managing needs.

Instrument Management Streamlined and Simplified

With IntelliDox, it takes very little time to set up and install as many as five modules. The system has the ability to handle detectors separately or together. For example, suppose you need to bump test 2 units and it's time to calibrate 3. Thanks to your new system, you can do both tasks at the same time. Every module comes with separate screen, pump, and OS.

Enhanced configuration options at your fingertips

Do you need to change the maximum gas level alarm setting? This is just one of many parameters you can change when needed. You'll keep all your gas detectors working to your specs as long as you own them.

Enhanced data transfers and networking

When you need to backup or transfer bump test data, or other info, it's as easy as plugging in a USB device or Ethernet cable.

• System lets you expand your fleet up to 5 modules
• Fast configuration - easy to track compliance and set alarm functions
• Perfect for turnarounds - simple and quick
• Simple and efficient way for customize maintenance-free units

Compatible Gas Detectors

ConneX1
BW Clip Series (includes BW Clip 4)
GasAlertMicroClip Series (includes X3 and XL)

A New Style of Bump Testing

When you use FastBump it takes very little time to apply test gas for the bump testing procedure. This method is not only fast, it's highly efficient and you'll save money on calibrating gas.

Important IntelliDoX Features:

• Compatible detector support for bump tests, record-keeping, configuration, and calibration. These settings are updatable: Gas Reading shown with alarm; Bump test scheduling and calibration reminders; Alarm settings configuration; Enable non-compliance warning; Choose how time is displayed; Event Logs data transfer; Hibernation Detection; Firmware updating
• Highly-efficient FastBump testing eliminates bottlenecks. You don't lose a lot of gas during the purge cycle.
• Network connection via Ethernet port
• Quick setup - you don't need special tools
• USB port - network access not required for data retrieval or module configuration
• Automated span calibration and bump testing
• Connect up to five modules together while keeping the option of independent operation (each unit has a display and keypad).

Specifications for Your IntelliDox Docking System

Size: single module is 5.4" width x 14.2" height x 4.3" depth. (13.8 x 36.2 x 10.9 cm)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE supply
Real-time clock: Both time & date stamp
Communications method: Two-way infrared communication between docking module and detector

External interface

• USB - 1 port
• Ethernet - 1 port

Menu navigation

• Display settings adjustments
• Change date and time
• Gas inlet configuration options
• Review IntelliDoX module
• Password protection is optional
• UI display language: German, English French, Spanish, Portuguese

Automatic testing

• Standard bump - 40 seconds
• FastBump - 10 seconds

Pump

• Flow Rate: 350 ml/min
• Independent pump (each IntelliDoX docking module unit)

Data Storage (internal): 2 GB

Instrument Management System: Fleet Manager II, version 4.0 or newer

Warranty: Full two-year (24 month) warranty

Ratings: Device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation.

Options & Accessories

Portable Kit is a fully portable IntelliDoX testing station in a Pelican case. Each kit comes with: two docking modules, tubing, ethernet cable, demand flow regulator, AC power adaptor, and more.

Multi-Inlet Key

User can configure each IntelliDoX module for more than one calibration gas connection

A complete list of kits & accessories is available.

DUE TO ONGOING RESEARCH AND DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Part Number: DX-ULTRA

DOCK2-4-1C1P-00-G MicroDock II Automatic Test and Calibration Station with 1 fresh air and 3 gas inlet(s), 1 GasAlertMicroClip XT module(s) with charging, with charging power supply by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK241C1P00G

HU-X1W1H1M100-B-N BW™ Ultra 4-Gas Detector (O2, LEL, H2S, CO) with Pump, Black Housing by BW Technologies

At Honeywell, we always put your safety where it should be first. With Honeywell BW™ Ultra, our new portable five-gas detector, you will be able to do the same for your workers. Designed specifically for sampling and monitoring confined spaces, before and after entry, Honeywell BW™ Ultra has enhanced sensor technology, visibility on gas readings, comfort, and connectivity. This makes it the most reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.
The Honeywell BW™ Ultra complies with all safety regulations in place by detecting your required gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the market to feature the 1?Series sensor, with fast response, reliable performance and long life, even in extreme working conditions. That means high accuracy and lower costs.

Features & Benefits

Ultra Easy

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance

Ultra Visibility

• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance

Ultra Rugged

• Honeycomb-designed housing for extra ruggedness
• Protection designed in the right place
• Scratch-resistant display protector

Ultra Connected

• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting

Ultra Comfortable

• Ergonomically designed for easy use
• Light yet rugged design
• Fits in the hand for easy sampling

Ultra Quick

• Quick responding sensor technology
• Quick decision making because large display
• Quick bump & calibration with IntelliDoX system

Part Number: HU-X1W1H1M100-B-N

M5-XWAY-R-D-D-Y-N-00 GasAlertMicro 5 Detector %LEL, O2, H2S, CO, NH3 - NiMH Battery and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5XWAYRDDYN00

DOCK2-3-1C1J1N-00-G MicroDock II Automatic Test and Calibration Station with 1 fresh air and 2 gas inlet(s), 1 GasAlertMicro 5 Series module(s) without charging (not compatible with ClO2 or O3), 1 GasAlertQuattro module(s) with charging, with charging power supply by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK231C1J1N00G

DOCK2-4-1C1E1H1M-00-G MicroDock II Automatic Test and Calibration Station with 1 fresh air and 3 gas inlet(s), 1 GasAlertClip Extreme (H2S) module(s), 1 GasAlertClip Extreme (O2) module(s), 1 GasAlertMax XT II module(s) with charging, with charging power supply by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK241C1E1H1M00G

Part Number: DOCK2400G

DOCK2-2-1J-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicro 5 Series Module (non-charging) with 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221J00G

HU-X1W1H1M1A1-Y-N BW™ Ultra 5-Gas Detector (O2, LEL, H2S, CO, NH3) with Pump, Yellow Housing by BW Technologies

At Honeywell, we always put your safety where it should be first. With Honeywell BW™ Ultra, our new portable five-gas detector, you will be able to do the same for your workers. Designed specifically for sampling and monitoring confined spaces, before and after entry, Honeywell BW™ Ultra has enhanced sensor technology, visibility on gas readings, comfort, and connectivity. This makes it the most reliable and user-friendly way to prevent a safety incident.

Extra Gas Detection. Extraordinary.
The Honeywell BW™ Ultra complies with all safety regulations in place by detecting your required gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases for added protection at work.

The Honeywell BW™ Ultra is the first gas detector on the market to feature the 1?Series sensor, with fast response, reliable performance and long life, even in extreme working conditions. That means high accuracy and lower costs.

Features & Benefits

Ultra Easy

• Tamper-proof operation with one button operation
• Intuitive LCD icons for quick decision making
• Easy service and maintenance

Ultra Visibility

• Intuitive large dot matrix display giving clear readings
• Smart Gas layout for clear sensor reading
• Hole Watch Mode for quick decision making
• IntelliFlash™ and also Reverse IntelliFlash™ for clear compliance

Ultra Rugged

• Honeycomb-designed housing for extra ruggedness
• Protection designed in the right place
• Scratch-resistant display protector

Ultra Connected

• Honeywell Connected Worker compatible
• Honeywell TouchConnect™ Technology for activating a feature
• Honeywell SafetySuite for unit configuration and reporting

Ultra Comfortable

• Ergonomically designed for easy use
• Light yet rugged design
• Fits in the hand for easy sampling

Ultra Quick

• Quick responding sensor technology
• Quick decision making because large display
• Quick bump & calibration with IntelliDoX system

Part Number: HU-X1W1H1M1A1-Y-N

DOCK2-2-1C1K-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicro 5 Series Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1K00G

Part Number: DOCK201K00G

DX-MAXXT IntelliDoX Docking Station for BW MaxXT II by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-MAXXT

A gas detector with unequalled performance and custom options

Do you need a more efficient way to manage your gas detector fleet? Now you can use the IntelliDox smart docking system with your Fleet Manager II program. This automates the process to make you more productive and efficient.

Easy management combined with greater productivity

Installing IntelliDoX is fast and easy. It only takes a few minutes to set up the 5-unit docking system. It's simple to multi-task because every module can operate independently with its own screen, pump, and operating system. It's possible to calibrate 4 units while bump testing another one, so you increase efficiency and save time.

Configuration flexibility for changing needs

With the new IntellDox smart docking system, you control many of the settings. This includes alarm for high and low parameters. Your detector equipment will always meet your specifications.

Simplify data management and networking

Data transfer is quick and simple. Store and transfer gas detection info like bump tests via Ethernet cable or USB.

• Take customizing to an entirely new level
• Modules can be expanded to five units
• Setup is uncomplicated and fast
• Many options, including worker compliance tracking

Compatible units

Outstanding Bump Test Performance

Bump testing has never been easier or more efficient. With the help of FastBump, you can quickly bump test your detectors while saving on bump test gas. It revolutionizes the bump testing process.

Features:

• Now you can calibrate, bump test, configure, and track data with compatible gas detectors. Users can update these settings: Display Gas Concentration Readings with Alarm; Change Alarm Settings; Time Display Preferences; Transfer Event Logs Data; Non-compliance Indicator Enabling; Hibernate unit; Schedule Reminders for Bump Tests and Calibration; Firmware update
• Modules have their own keypads and LCD screens - gangable up to 5 units
• Ethernet port for easy network connection
• Change module settings or transfer data via USB port - no network connection needed.
• Best in the industry FastBump Test - eliminates wasteful purge cycles and bottlenecks
• Easy setup - you don't need any tools
• No need for manual bump testing or calibration

Specs for IntelliDoX

Size (w x h x d): 5.4 x 14.2 x 4.3 in. (13.8 x 36.2 x 10.9 cm) (individual docking module)
Weight: 4.2 lb (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: 2-way (infrared) communications between docking module and detector

External interface

• One USB port
• One Ethernet port

Menu navigation

• Display settings
• Time and date
• Gas inlets
• Review IntelliDoX module
• Password protect (when enabled)
• UI display language: English, French, German, Portuguese and Spanish options

Automatic testing

• FastBump - ten seconds
• Standard bump - forty seconds

Internal Data Storage: 2 GB

Pump

• Independent pump (each IntelliDoX module)
• Flow Rate: 350 ml/min

Instrument Management System: Fleet Manager II, v 4.0 or higher

Ratings

• Device complies with FCC Part 15 and ICES-003
• Canadian EMI requirements. Operation is subject to the following two conditions: (1) Device may not cause harmful interference, (2)  Must accept any interference received (includes interference which may cause undesired operation).

Warranty: Full two-year warranty

Accessories and Options

Portable Kit – IntelliDoX fully portable station with Pelican case. Kit contains: 2 docking modules, AC power supply, ethernet cable, tubing, demand flow regulator, and more.

Multi-Inlet Key

Configure one IntelliDoX module to connect multiple calibration gas

Complete list of kits and accessories is available.

DUE TO ONGOING RESEARCH & PRODUCT IMPROVEMENT, SPECS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Part Number: DX-CLIP