$200 - $300, BW Technologies Monitors

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet. Note: The SR-X2V is a direct replacement for the SR-X10 and SR-X10-C1 sensors. It can be used in any instrument that uses those sensors. If you are replacing your O2 sensor this is the best choice because it is an upgraded and more reliable design.

Part Number: CG2J2.534AL

BWC2-M BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

Carbon Monoxide (CO) is one of the most dangerous gases you can encounter, because it is colorless and odorless. You cannot afford to take chances with your well-being and that is why the BWC2-M is a popular choice for portable CO detection today. The BWC2-M is built to give you a full 24 months of dependable and reliable service, and it is one of the easiest gas monitors to use and maintain. It never needs batteries or a new sensor. Low alarm level is 35 ppm and at 200ppm you receive a high alarm (default settings).

Your two year gas monitor can last for as long as three years. For example, if it is in storage for three months, its life is extended by three more months.

Do you use a MicroDock system or Fleet Manager II software? Your BWC2-M will be a welcome addition. Plus, when used with IntelliDoX systems, you receive these benefits:

• Adjustable parameters and alarms
• Rapid bump tests
• Easy recordkeeping
• 5 sensors testing

Technology from BW Clip

Configuring the BWC2-M

Why Buy the BWC2-M?

• Very light and will not weigh you down
• Affordably priced
• No maintenance works by pushing a button
• Loud 95 decibel alarm
• Can record the last 35 gas readings and bump tests
• Very tough - can withstand low temperatures and wet conditions
• The BWC2-M is smart. In fact, it tests its own sensor and battery

Part Number: BWC2M

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet.

Part Number: SRX10

Part Number: SR-X1-1S

Part Number: CGQ344

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 25 ppm / High - 100 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M25100

BWC2-H BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm by BW Technologies

Are you looking for a cost effective and reliable H2S detector to keep workers safe and compliant? The BW Clip BWC2-H is one of the easiest to operate and most dependable portable gas detectors on the market today. In fact, it is designed to deliver maintenance free operation for an entire two years. It is simple to use and there is no need to calibrate. It never needs new batteries or battery charging, and the sensor never needs replacing. It provides a low level alarm at 10 ppm and high level at 15 ppm.

Click for sound

1:49

MicroDock II and Fleet Manager II compatible and the BW Clip BWC2-H will fit right in with your IntelliDoX instrument management system, and you'll enjoy a host of benefits from BW clip units with IntelliDoX technology, such as:

• Testing for 5 units at one time
• Extremely fast bump tests (fastest in the industry)
• Parameter and alarm set point adjustment
• Email notices and easy recordkeeping

BW Clip includes:

• Self test function thanks to Reflex Technology™ your gas sensor will test itself every day to ensure safety, instill worker confidence, and limit downtime.
• Dual reservoir design with Surecell™ technology, you have much faster response time and performance than standard electromechanical sensors. In addition, you'll receive excellent performance in the harshest of work environments.

Standard features includes:

• Lightweight and compact
• Maintenance free (one push button) operation
• 3 function alarm flashes, vibrates and loud 95 decibel sound
• Self testing battery, electronics, and sensor
• Low operating costs
• Rated for extreme temperatures and environments
• Logs last 35 H2S events and bump tests

Configuration Options:

• Flashing red noncompliance indicator - enable bump test due or gas event
• Set both low and high alarm set points prior to activation
• Gas reading can be given with alarm
• Bump test reminder can be set by user
• Display can include the current time of day

Part Number: BWC2H

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X

Part Number: 2992-0029

BWC3-H BW Clip 3 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3H

BW Technologies Collapsible Sample Probe with Handle (6 feet)

BW Technologies manufactures a range of accessories, attachments, and replacement parts for its devices. To help improve the usability of its detectors, BW Technologies also produces various probes. The BW Technologies Collapsible Sample Probe with Handle extends to approximately 6 feet and can easily fold into a compact unit that will easily fit in a utility belt, work bag, or pocket. This sample probe also has a comfort grip handle for ease of use.

Part Number: GACPROB2

BW Clip RT 2 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: REG0.5

GA36XT-H-BR GasAlertClip Extreme 3 Year Single Gas Detector, Hydrogen sulfide (H2S) (INMETRO certified, for Brazil only) by BW Technologies

Ongoing product research enables BW Technologies to develop the most advanced workplace safety instruments in the industry. With incredible durability, accuracy, and reliability, the GasAlertClip Extreme is designed to monitor single gases in various settings and alert users of potentially unsafe situations. As technology advances, the standards of safety evolve. The GasAlertClip offers the very best of current technology at a low cost. This ensures that users and worksites can remain cost efficient with technology upgrades. Utilizing the most advanced technology, the highest safety standards, and cost efficiency, BW Technologies has created a single gas detector that is certain to meet the needs of the modern work environment.

Features

An accurate and reliable gas detection system is the most important safety instrument when working in mining, construction, fire and emergency services, confined spaces, and other potentially dangerous settings. The GasAlertClip Extreme is designed to withstand the harshest of environments and deliver consistently reliable alerts for up to 3 years. The durable outer casing protects the internal sensors from damage and renders the unit water resistant.

To ensure reliability and effectiveness, users can perform periodic self-tests of sensors, batteries, circuits, and alarms. The unit also performs a self-test upon activation and every 20 hours. Additionally, the battery is automatically tested every 2 hours to ensure the user can rely on the unit's warnings.

Maintenance free

The GasAlertClip Extreme also features maintenance free technology that is user friendly and easy to understand. The clip is available in both 2 year and 3 year versions. During the instrument's lifespan, the device will not require calibration tests, sensor replacement, batter replacement, or recharging of batteries. Users will find the GasAlertClip Extreme to be easy to use and with minimal training requirements. The various clips for different gases also feature color coded labels to distinguish between different gas detectors and LCD indicators. Users will also be able to manage alarm settings with ease and view information on the large LCD display such as the remaining life of the device and visual alarm bars.

Datalogging and alarms

Record keeping is a standard feature of the GasAlertClip Exteme. The clip will automatically record and transmit gas alarm events. This can provide valuable information to worksite managers assessing gas trends in various worksites. The alarm system includes visual alarms, vibrating alarms, and audible alarms of over 95 decibels. Workers with hearing or visual impairments or workers in loud settings will find the triple alarm system to be a valuable safety feature.

Compatibility and accessories

The GasAlertClip Extreme is compatible with a variety of test systems and accessories. The MicroDock II is a compatible automatic testing system. Accessories such as the concussion-proof boot, bulk packaging, and IR DataLink are also available. At 2.7 ounces and approximately 1 inch by 2 inches by 3 inches, the device is highly portable, lightweight, and comfortable to wear. The typical battery life is 2 or 3 years, depending on the version of the device, and the GasAlertClip Extreme is standard with a 2 to 3 year warranty from the date of activation.

Part Number: GA36XTHBR

Part Number: CG2IB10034AL

GAXT-X-DL GasAlert Extreme Detector O2 Yellow by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTXDL

Part Number: GASP02

BWC3-M BW Clip 3 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3M

BWC2R-X BW Clip RT 2 Year Single Gas Detector, Oxygen (O2), (Low 19.5% / High 23.5%) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-X

Part Number: W03-2111-000

BWC2-H515 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 15 ppm by BW Technologies

Hydrogen sulfide (H2S) is flammable and toxic at relatively low concentrations. It is essential to keep this potentially dangerous gas at safe levels, at all times. That is why many workers trust the BWC2-H515 by BW Technologies. This portable H2S detector is one of the most reliable and cost effective models you can buy, and it will perform constantly for two solid years, without any maintenance. You do not have to be concerned with battery charging or sensor replacement. The BWC2-H515 has a high alarm when H2S levels reach 15 ppm and a low alarm at 5 ppm (these are default settings).

If you put your BWC2-H515 in storage, it will prolong its life. For instance, 60 days on the shelf provides an additional 60 days of service (up to one year).

Your BWC2-H515 will seamlessly fit in with Fleet Manager II software and MicroDock II systems. In addition, it works especially well with IntelliDoX instrument management systems, and here are some of the things you receive:

• Test as many as 5 sensors at once
• Quick and efficient recordkeeping
• Fast bump testing capabilities
• Parameter and alarm set adjustment

BW Clip Technology

Standard features:

• Light and easy to carry
• Virtually maintenance free
• Operates with a single push button
• Self-testing sensor and battery
• 95 db alarm can also flash or vibrate
• Can withstand extreme working environment
• Affordable operating cost
• Remembers 35 bump tests and gas events

Configuring Your BWC2-H515

Part Number: BWC2H515

Part Number: CGRK1

BW Technologies Replacement Hydrogen Sulfide Sensor

BW Technologies manufactures and produces a variety of gas detection devices and replacement parts for many of their products. BW Technologies replacement sensors are the most dependable and reliable sensors on the market. This replacement sensor is hydrogen sulfide specific and is compatible with certain BW Technologies devices. Please consult the specification sheet for your product to determine if this hydrogen sulfide replacement sensor is compatible with your device.

Part Number: SRH04SC