$1000 - $2000, Portable Instruments, Bacharach

0010-5020 Fyrite CO2 (0-20%) and O2 (0-21%) testing kit, sampling assembly and carry case by Bacharach

Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.

Components

• 1. Fyrite® Indicators; CO2 and O2 – The Fyrite Indicators are utilized in conjunction with the Tempoint Dial thermometer to determine efficiency calculation with the Fire Efficiency Slide Rule.
• 2. Monoxor® CO Indicator – The Monoxor Indicator quickly and easily tests CO concentrations in flue gas samples.
• 3. Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule provides a rapid and uncomplicated means of determining combustion efficiency and stack loss from the resultsof the CO2 and stack temperature tests.
• 4. Draftrite® Draft Gauge – The hand-held Draftrite pinpoints draft problems and determines chimney defects.
• 5. Tempoint® Dial Thermometer – With the Tempoint Dial Thermometer, you can obtain an accurate stack temperature of gas designed equipment.
• 6. Gas Service Calculator – The Gas Service Calculator determines the orifice size needed for fuel gas of any specific gravity and BTU value.
• 7. Gas Pressure Manometer – The Gas Pressure Manometer determines if gas input and gas pressure adjustments are within recommended limits.
• 8. Monoxor® Carbon Monoxide Detector – In some Testing Kits, the Monoxor Carbon Monoxide Detector replaces the Monoxor CO Indicator.
• 9. Carrying Case – Testing kit comes in a rugged, plastic carrying case.

2020-8000 ECO-2020 Refrigerant Recovery Unit, 110-120 VAC/60 Hz with N. American power cord by Bacharach

MSA Bacharach's ECO-2020™ is a powerful twin-cylinder refrigerant recovery unit capable of handling the toughest demands from residential and light-commercial contractors and their applications. Powered by a 1 HP oil-less compressor, the ECO-2020™ quickly, quietly and effortlessly recovers virtually any refrigerant, saving you time and money.

The ECO-2020™ recovers all non-flammable CFC, HFC and HCFC refrigerants and is certified by AHRI to standard 740 as the fastest unit in its class. The instrument is covered by a 1 year over-the-counter warranty.

Features

• Powerful, quiet-running 1 HP compressor
• Simple one-knob, three step operation
• Evacuate a typical residential system in under 5 minutes
• Built-in printer for instant traceability and record-keeping

0024-8512 Fyrite InTech Reporting Kit (N. American configuration) with probe, rubber boot, IrDA wireless printer, Fyrite User Software, USB cable and hard carrying case by Bacharach

MSA Bacharach's InTech® is the perfect tool for entry-level residential HVAC technicians providing readings for O2, CO, CO2, Combustion Efficiency and Temperature. The InTech® is available with precalibrated, Sensor Exchange Program gas sensors to minimize downtime and maintenance costs. The Combustion mobile app (available for Android & iOS) allows users to create and send customizable combustion reports on-site.

FEATURES

• Readings for O2, CO, CO2, Combustion Efficiency & Temperature
• Combustion App
• Automatic Sensor Protection
• IR Printer with Magnet
• Ambient CO Monitor
• Precalibrated, Sensor Exchange Program Sensors

BENEFITS

• All-in-one instrument makes combustion tuning fast and simple.
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Check for dangerous levels of ambient CO
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0024-8523 Fyrite InTech Basic Kit (N. American configuration) with probe, rubber boot and hard carrying case by Bacharach

MSA Bacharach's InTech® is the perfect tool for entry-level residential HVAC technicians providing readings for O2, CO, CO2, Combustion Efficiency and Temperature. The InTech® is available with precalibrated, Sensor Exchange Program gas sensors to minimize downtime and maintenance costs. The Combustion mobile app (available for Android & iOS) allows users to create and send customizable combustion reports on-site.

FEATURES

• Readings for O2, CO, CO2, Combustion Efficiency & Temperature
• Combustion App
• Automatic Sensor Protection
• IR Printer with Magnet
• Ambient CO Monitor
• Precalibrated, Sensor Exchange Program Sensors

BENEFITS

• All-in-one instrument makes combustion tuning fast and simple.
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Check for dangerous levels of ambient CO
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0010-5022 Oil burner combustion testing kit - includes Fyrite CO2 20% Indicator (filled), Fire Efficiency Finder, moisture absorbtion material, sampling hose assy., Tempoint (1000°F, 6" stem), MZF Draft (+.05 to -.25" WC), Tru Spot and large carrying case. by Bacharach

Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.

Components

• 1. Fyrite® CO2 Indicator – The Fyrite Carbon Dioxide Indicator measures the percent CO2 in a flue gas sample.
• 2. True Spot® Smoke Tester and Oil Burner Smoke Scale – With the True Spot Smoke Tester and Smoke Scale, you can get an accurate indication of smoke content in flue gas.
• 3. Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule is a quick and easy way of determining combustion efficiency and stack loss from the results of the CO2 and stack temperature tests.
• 4. Tempoint® Dial Thermometer – High stack temperatures are cause for special concern and may indicate a serious condition.
• 5. Model MZF Draft Gauge – The intensity of draft determines the rate at which combustion gases pass through the boiler or furnace. With the MZF Draft Gauge, you can determine if draft is excessive or insufficient.
• 6. Draftrite® Draft Gauge – In some Oil Burner Combustion Testing Kits, the hand-held Draftrite replaces the Model MZF Draft Gauge for measuring overfire and draft.
• 7. Carrying Case – Instruments for Bacharach Oil Burner combustion Testing Kits come in a rugged, plastic carrying case.

0010-5036 Oil burner combustion testing kit - includes Fyrite CO2 20% Indicator (filled), Fire Efficiency Finder, moisture absorbtion material, sampling hose assy., Tempoint (1000°F, 6" stem), Draftrite (+.10 to -.14" WC), Tru Spot and large carrying case by Bacharach

Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.

Components

• 1. Fyrite® CO2 Indicator – The Fyrite Carbon Dioxide Indicator measures the percent CO2 in a flue gas sample.
• 2. True Spot® Smoke Tester and Oil Burner Smoke Scale – With the True Spot Smoke Tester and Smoke Scale, you can get an accurate indication of smoke content in flue gas.
• 3. Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule is a quick and easy way of determining combustion efficiency and stack loss from the results of the CO2 and stack temperature tests.
• 4. Tempoint® Dial Thermometer – High stack temperatures are cause for special concern and may indicate a serious condition.
• 5. Model MZF Draft Gauge – The intensity of draft determines the rate at which combustion gases pass through the boiler or furnace. With the MZF Draft Gauge, you can determine if draft is excessive or insufficient.
• 6. Draftrite® Draft Gauge – In some Oil Burner Combustion Testing Kits, the hand-held Draftrite replaces the Model MZF Draft Gauge for measuring overfire and draft.
• 7. Carrying Case – Instruments for Bacharach Oil Burner combustion Testing Kits come in a rugged, plastic carrying case.

0010-5111 Fyrite CO2 and O2 Testing Kit c/w sampling assembly and carry case by Bacharach

Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.

Components

• 1. Fyrite® Indicators; CO2 and O2 – The Fyrite Indicators are utilized in conjunction with the Tempoint Dial thermometer to determine efficiency calculation with the Fire Efficiency Slide Rule.
• 2. Monoxor® CO Indicator – The Monoxor Indicator quickly and easily tests CO concentrations in flue gas samples.
• 3. Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule provides a rapid and uncomplicated means of determining combustion efficiency and stack loss from the resultsof the CO2 and stack temperature tests.
• 4. Draftrite® Draft Gauge – The hand-held Draftrite pinpoints draft problems and determines chimney defects.
• 5. Tempoint® Dial Thermometer – With the Tempoint Dial Thermometer, you can obtain an accurate stack temperature of gas designed equipment.
• 6. Gas Service Calculator – The Gas Service Calculator determines the orifice size needed for fuel gas of any specific gravity and BTU value.
• 7. Gas Pressure Manometer – The Gas Pressure Manometer determines if gas input and gas pressure adjustments are within recommended limits.
• 8. Monoxor® Carbon Monoxide Detector – In some Testing Kits, the Monoxor Carbon Monoxide Detector replaces the Monoxor CO Indicator.
• 9. Carrying Case – Testing kit comes in a rugged, plastic carrying case.

0010-5150 Oil burner combustion testing kit - includes Fyrite CO2 20% Indicator (NO FLUID - FOR EXPORT), Fire Efficiency Finder, moisture absorbtion material, sampling hose assy., Tempoint (1000°F, 6" stem), MZF Draft (+.05 to -.25" WC), Tru Spot and large carrying case by Bacharach

Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.

Components

• 1. Fyrite® CO2 Indicator – The Fyrite Carbon Dioxide Indicator measures the percent CO2 in a flue gas sample.
• 2. True Spot® Smoke Tester and Oil Burner Smoke Scale – With the True Spot Smoke Tester and Smoke Scale, you can get an accurate indication of smoke content in flue gas.
• 3. Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule is a quick and easy way of determining combustion efficiency and stack loss from the results of the CO2 and stack temperature tests.
• 4. Tempoint® Dial Thermometer – High stack temperatures are cause for special concern and may indicate a serious condition.
• 5. Model MZF Draft Gauge – The intensity of draft determines the rate at which combustion gases pass through the boiler or furnace. With the MZF Draft Gauge, you can determine if draft is excessive or insufficient.
• 6. Draftrite® Draft Gauge – In some Oil Burner Combustion Testing Kits, the hand-held Draftrite replaces the Model MZF Draft Gauge for measuring overfire and draft.
• 7. Carrying Case – Instruments for Bacharach Oil Burner combustion Testing Kits come in a rugged, plastic carrying case.

0019-8118 Monoxor Plus Kit (CO Monitor) includes printer, probe & hose assembly, carrying strap, instruction manual and hard carrying case by Bacharach

MSA Bacharach's Monoxor® Plus is an advanced carbon monoxide analyzer designed for ambient CO safety testing and direct CO measurements from boilers, furnaces or gas appliances. View and save your CO readings in real-time from the numerical or graphical display screens. The Monoxor® Plus is available with precalibrated, Sensor Exchange Program sensors to minimize downtime and maintenance costs. The Combustion mobile app (available for Android & iOS) allows users to create and send customizable combustion reports on-site.

Features

• Reading for Ambient Carbon Monoxide
• Reading for Flue Gas Carbon Monoxide
• Combustion App
• Automatic CO Alarm
• Graphical and Standard Display Screens
• IR Printer with Magnet
• Ambient and Flue Gas Temperatures
• Precalibrated, Sensor Exchange Program Sensors

Benefits

• Measure ambient CO levels for safety and indoor air quality tests
• Measure CO flue gas directly from boilers, furnaces, or gas appliances
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Alerts the user to potentially dangerous levels of CO
• View real-time CO readings in graphical or standard formats
• Print combustion and emissions reports in the field
• Dual thermocouples inputs for differential temperature capability
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0019-8119 Monoxor XR with standard 12 in. probe in rugged protective carrying case (Basic Kit) by Bacharach

MSA Bacharach's Monoxor® XR is a portable exhaust gas analyzer designed to measure high CO from forklifts and other combustion engines burning propane, gasoline, diesel, LPG and CNG. View and save your CO readings in real-time from the numerical or graphical display screens. The Monoxor® XR is available with precalibrated, Sensor Exchange Program sensors to minimize downtime and maintenance costs. The analyzer is also compatible with MSA Bacharach's Combustion App which allows users to quickly create / share custom reports (available for Android & iOS).

Features

• Exhaust Gas Carbon Monoxide
• Ambient Carbon Monoxide Test
• Automatic CO Alarm
• Graphical and Standard Display Screens
• IR Printer with Magnet
• Exhaust Gas Temperature
• Precalibrated Sensor Exchange Program

Benefits

• Measure CO flue gas directly from engines
• Measure ambient CO levels for safety and indoor air quality tests
• Alerts the user to potentially dangerous levels of CO
• View real-time CO readings in graphical or standard formats
• Print combustion and emissions reports in the field
• Type K thermocouples input for temperature capability
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0019-8120 Monoxor XR with standard 12 in. probe, IrDA wireless printer and Fyrite User Software in rugged protective carrying case (Reporting Kit) by Bacharach

MSA Bacharach's Monoxor® XR is a portable exhaust gas analyzer designed to measure high CO from forklifts and other combustion engines burning propane, gasoline, diesel, LPG and CNG. View and save your CO readings in real-time from the numerical or graphical display screens. The Monoxor® XR is available with precalibrated, Sensor Exchange Program sensors to minimize downtime and maintenance costs. The analyzer is also compatible with MSA Bacharach's Combustion App which allows users to quickly create / share custom reports (available for Android & iOS).

Features

• Exhaust Gas Carbon Monoxide
• Ambient Carbon Monoxide Test
• Automatic CO Alarm
• Graphical and Standard Display Screens
• IR Printer with Magnet
• Exhaust Gas Temperature
• Precalibrated Sensor Exchange Program

Benefits

• Measure CO flue gas directly from engines
• Measure ambient CO levels for safety and indoor air quality tests
• Alerts the user to potentially dangerous levels of CO
• View real-time CO readings in graphical or standard formats
• Print combustion and emissions reports in the field
• Type K thermocouples input for temperature capability
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0019-8121 Monoxor XR Basic Kit with exhaust probe by Bacharach

MSA Bacharach's Monoxor® XR is a portable exhaust gas analyzer designed to measure high CO from forklifts and other combustion engines burning propane, gasoline, diesel, LPG and CNG. View and save your CO readings in real-time from the numerical or graphical display screens. The Monoxor® XR is available with precalibrated, Sensor Exchange Program sensors to minimize downtime and maintenance costs. The analyzer is also compatible with MSA Bacharach's Combustion App which allows users to quickly create / share custom reports (available for Android & iOS).

Features

• Exhaust Gas Carbon Monoxide
• Ambient Carbon Monoxide Test
• Automatic CO Alarm
• Graphical and Standard Display Screens
• IR Printer with Magnet
• Exhaust Gas Temperature
• Precalibrated Sensor Exchange Program

Benefits

• Measure CO flue gas directly from engines
• Measure ambient CO levels for safety and indoor air quality tests
• Alerts the user to potentially dangerous levels of CO
• View real-time CO readings in graphical or standard formats
• Print combustion and emissions reports in the field
• Type K thermocouples input for temperature capability
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0019-8122 Monoxor XR Reporting Kit with exhaust probe by Bacharach

MSA Bacharach's Monoxor® XR is a portable exhaust gas analyzer designed to measure high CO from forklifts and other combustion engines burning propane, gasoline, diesel, LPG and CNG. View and save your CO readings in real-time from the numerical or graphical display screens. The Monoxor® XR is available with precalibrated, Sensor Exchange Program sensors to minimize downtime and maintenance costs. The analyzer is also compatible with MSA Bacharach's Combustion App which allows users to quickly create / share custom reports (available for Android & iOS).

Features

• Exhaust Gas Carbon Monoxide
• Ambient Carbon Monoxide Test
• Automatic CO Alarm
• Graphical and Standard Display Screens
• IR Printer with Magnet
• Exhaust Gas Temperature
• Precalibrated Sensor Exchange Program

Benefits

• Measure CO flue gas directly from engines
• Measure ambient CO levels for safety and indoor air quality tests
• Alerts the user to potentially dangerous levels of CO
• View real-time CO readings in graphical or standard formats
• Print combustion and emissions reports in the field
• Type K thermocouples input for temperature capability
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)