All Products

Part Number: P107850LM5

0632 0317 315-2 Ambient CO Meter with Alarms by Testo

Use testo 315-2 to check the CO level in ambient air. Even low concentrations of the highly poisonous gas are detected. In this way, you can judge whether the burner flue gases are being fully drawn off.

• Reliable warning of CO poisoning
• DVGW approval
• Adjustment of different alarm limits
• Printout with date/time and recommended value (alarm limit)
• With calibration protocol
• TopSafe, protection case for tough applications
• Quick and practical documentation of data on location, printout with date/time and recommended value (alarm limit)

3020MKA Handheld Conductivity/Salinity/TDS/Temperature Meter Kit by Jenco

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 4-wire conductivity cell with K=0.475 cell constant and 2-wire K=0.1 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

Includes:

• 3020M: Meter with memory
• 3020P: Conductivity Probe
• 3020F: Carrying Case

M01-0312-000 RAE-Sep™ Benzene Separation Tubes Cartridges for MultiRAE Benzene (6 Cartridges / Box) by RAE Systems

RAE-Sep™ tube cartridges are used with the MultiRAE Benzene to perform a snapshot measurement of benzene. One cartridge contains six benzene RAE-Sep™ tubes.

Key Features

• Available for Benzene snap shot measurement only
• Compatible with MultiRAE Benzene only
• Automatic sampling time adjustment according to environment temperature
• 2 modes: Total VOC measurement & Benzene mode
• Allows 6 Benzene snap shot measurement

Applications

• Confined Space Entry
• Environmental Cleanups/Remediation
• Exploration
• Leak Detection
• Plant Shutdown & Turn-Around

XT-00HM-Y-OR GasAlertMax XT II 2 Gas Detector, Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing, OR Version (Other Regions, 3-pin UK plug) by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XT00HMYOR

72-5513RK-03 Eagle Portable Monitor for LEL/O2/CO/NO2/CO2 (5%) by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

65-2516RK S-Series Oxygen (O2) Sensor (Capillary Type)/Transmitter, Explosion Proof with Conduit Mounting and J-Box, CSA Version by RKI Instruments

The RKI "S" Series gas sensor and transmitter is basic gas transmitter for the detection of common gas hazards. The transmitter is an efficient, reliable, and cost-effective safety solution to meet the needs of any industrial application. The transmitters were created specifically for highly volatile environments, and each transmitter is housed in an explosion proof casing. The device is ready for field use and can be adjusted and calibrated easily in the field. With an RKI "S" Series transmitter, users can be certain that they are receiving the very best in gas safety equipment.

RKI "S" Series Explosion Proof Gas Sensor and Transmitter Features

The transmitter is a reliable and durable solution for onsite hazards. True to its reputation, RKI Instruments designed this series with user friendly features to meet growing customer demands. This series features an explosion proof housing, patented water repellant sensor coating, long life sensors (2+ years of typical life), and an intrinsically safe rating. The unit operates independently of a controller and is available for LEL, H2S, CO, O2, and ppm HC monitoring. Infrared sensors are also available for LEL and CO2.

To protect the circuitry, the electronics are enclosed inside a potted package. This helps to reduce wear and tear due to corrosion and abuse. The amplifier is situated inside an aluminum explosion proof enclosure. Additionally, all sensors are explosion proof with flame arrestors. The flame arrestors use a patented water repellant coating. They are approved for use in hazardous atmospheres.

Industrial Applications

The series' basic design and user friendly nature is suitable for a variety of industrial applications, such as

• Petrochemical plants
• Refineries
• Gas plants
• Offshore drilling platforms
• Water and wastewater treatment plants
• Pulp and paper mills
• Gas, electric, and telephone utilities
• Parking garages
• Manufacturing facilities
• Steel industries
• Automotive plants
• Chemical storage buildings

Transmitter Specifications

The transmitters are functional both indoors and outdoors. Each condition provides a different operating range for temperature and humidity. Each transmitter operates on 11 to 30 VDC. Each transmitter also comes standard with a 1 year warranty for materials and workmanship.

RKI Instruments

RKI Instruments is a global leader in gas detection equipment manufacturing. For over 70 years, RKI has sold more than 800,000 portable and fixed gas monitors all over the world. The company strives to grow and develop with the changing technology. Their team of scientists and engineers are constantly researching and assessing the most advanced technology and working to improve their product offerings by successfully integrating this technology into modern safety equipment. At RKI, reliability and efficiency are key features of every new product.

*Please note we can only ship RKI products to customers within the United States

72-0301RKC GX-2009 Personal Gas Monitor, 1 gas, O2 with Alligator Clip and 115/220 VAC Charger by RKI Instruments

Workplace safety is a top priority at RKI Industries. With a reputation as being a world leader in gas detection and sensor technology, the company invests heavily in their research and design team to develop the industry's leading workplace safety products. The GX-2009 Model Personal Four Gas Monitor utilizes advanced technology and efficient design. It is the world's smallest and lightest gas monitor.

The GX-2009 Model Personal Four Gas Monitor

The GX-2009 Model Personal Four Gas Monitor is an obvious choice for many particularly hazardous applications. From personal monitoring in confined spaces to its use in fire services and construction, the portable monitor has been rated intrinsically safe. Its noticeable alarm functions and simultaneous detection of four separate gases help to ensure the safety of workers in potentially dangerous situations. The state of the art monitor can detect LEL, O2, H2S, and CO simultaneously and display the results on the large LCD display screen.

Each of the miniature sensors are manufactured with the high quality control standards of RKI Instruments. The compact sensors utilize catalytic combustion, electrochemical, and galvanic sensor technology.

Alarm System

The unit features dual audible alarm ports at 95 dB, and three bright LED lights for noticeable alerts. The Personal Four Gas Monitor also utilizes an ultra strong vibration alert designed to notify users of atmospheric conditions even when the device cannot be heard. When the monitor is in alarm mode, the backlight on the LCD display is turned on. The multi-faceted alarm system is designed to be noticeable in any given situation and is sure to notify the user and those nearby.

Standard Features

The GX-2009 Model Personal Four Gas Monitor has many standard features including an incredible datalogging function. The datalogging software can store up to 100 calibration records and is compatible with many computer platforms. The log time can range from 10 to 300 hours and houses 8 alarm trends. The unit can also remind users of upcoming calibration and bump tests. With 2 glow in the dark, glove friendly buttons, users can easily operate the device on site.

The unit comes standard with an alligator clip, NiMH batteries, a charging station with VAC power supply, and a product CD with datalogging software.

Specifications

The GX-2009 Model Personal Four Gas Monitor is the smallest and lightest personal gas monitor in the world. Weighing in at less than 5 ounces, the device fits easily in the palm of a hand and is easily portable. Additionally, the IP-67 water resistant and dustproof design contains an impact resistant over mold rubber body to protect the integrity of the device. The unit uses a set of 2 NiMH batteries with 20 hours of operation. Each GX-2009 Model Personal Four Gas Monitor comes standard with a 2 year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

Part Number: DOCK201C00N

M028-0017-000 Controller plus two VOXI 0.1-200 ppm H2S Transmitter with C1D1/C1D2 armored cable by mPower Electronics

The VOXiWatch II series continuous gas monitoring system is specifically designed for detection of H2S and LEL (combustibles) around temporary workover rigs. VOXiWatch II uses our MP883 two-channel controller in NEMA 4X enclosure, outfitted with transmitters for 1 or 2 electrochemical H2S sensor(s), or 1 or 2 catalytic bead LEL sensor(s), or one each of H2S and LEL. All cable connections are protected by rugged strain relief in an explosion proof enclosure that includes a convenient mounting bracket. The transmitters are equipped with splash/mud guards and are on 25-ft cables. The 50-ft power cable comes with battery clamps for connection to a user-provided 12-24 VDC battery. The VOXiWatch II enclosure includes horn and strobe assemblies. Also included are Modbus® RTU, common or individual channel relays, and large easy-to-read color display.

Features, Functions and Benefits

• Brackets to mount enclosure on solid surface
• Large graphic color LCD
• Push-button interface on controller display panel
• One multi-color LED per channel for power, fault, and alarm
• Communication: Modbus® RTU
• Two 3-wire 4-20mA inputs from transmitters
• Strobe and Horn relays
• 3 programmable dry contact relays (2 alarms, 1 fault)
• Up to 10 years of events logged
• 50-ft power cable and 25-ft cables for transmitters
• Splash/mud guards for sensor inlets