All Products

*Please note we can only ship RKI products to customers within the United States

GPF-0015-NU-A Gas-Pro 5-Gas Confined Space Entry Monitor, CO/H2S/O2/CH4/CO2 with Multi Region Power Lead, Non-pumped with Flow Plate by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

6302-4126 MGS-460 Gas Detector with Remote Sensor - IP66, 3 x Relays, Analog Output, Modbus Output, Audible & Visual Alarms - R407F, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

R63190 Quaestor 6000 CCBA NA by Draeger

All static and dynamic tests of the Draeger Quaestor 6000 take place semiautomatically as a sophisticated combination of personal handling and automated control during the test sequence. The software supports you with intuitive user guidance.

Semi-automatic static and dynamic tests

When using our Draeger Quaestor 6000, you combine intelligent manual operation with technical sophistication to accelerate the test sequence. On the one hand, there are processes, such as the control of the high pressure valve, that are fully automated. On the other hand certain individual tests require manual user intervention. With the Draeger Quaestor 6000, you can rely on a test device that has been specially designed for respiratory protection workshops with moderate test volumes.

Modular product design

The Draeger Quaestor 6000 can test full-face masks, chemical protection suits and compressed air breathing apparatus for functionality and leak tightness. The integrated artificial lung further permits dynamic simulated breathing tests.

Low weight and compact construction

Due to its small dimensions, the Draeger Quaestor 6000 takes up a small amount of space in the respiratory protection workshop. Thanks to its reduced weight (19.4 kg/42.8 lb with test head) and a convenient carrying handle, it allows easy transportation, e.g. in service vehicles. A workbench fixture, included in the scope of supply for the base unit, ensures a stable alignment during testing.

Optimum tight fit for all mask sizes

The test head can be turned without restriction and be removed as needed. This flexibility allows you to tailor the test design even more comfortably to your requirements. The gel face of the test head, which emulates the elasticity of human facial skin, optimizes a tight fit for all common mask sizes.

Intuitive software

The included software contains a comprehensive database of pre-installed amendable device data. With user notices and graphic elements, the manual test steps are presented comprehensibly even for inexperienced users. After every completed test, a test result report is created for documentation purposes. An optionally applied test-due list provides you with timely information about tests that are due. The software also permits a customer-specific design of the test sequences, events and intervals.

More space due to smaller housing dimensions

Due to the complete redesign of the electronic and pneumatic components, the new housing is about 4 cm/1.6 in narrower and thus creates additional work space. The device will remain compatible with the previous workbench set up.

Comprehensive optional accessories

The QSI Box provides noise insulation for the low pressure warning, resulting in a significantly reduced noise perception by the user. For your convenience, a specially designed bracket ensures a comfortable rest position of the pressure gauge or Draeger Sentinel during the test. Furthermore, a compressed air breathing apparatus holder allows you to comfortably position the device at eye level.

WD-35660-22 DO250 Waterproof DO Handheld Meter Kit with 5-m Cable by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure dissolved oxygen and temperature

Includes

meter, electrode, and 2 AA batteries.

24PFR 24" White Fan with Pedestal Stand by Schaefer

When you're tired of replacing damaged pedestals, use these OSHA-compliant pedestal fans with heavy-duty pedestal mounts, designed to last many years. These fans deliver quiet, powerful, efficient, and long-lasting air movement. Use these rugged, portable fans in warehouses, work areas, loading docks, greenhouses, farms, and other locations where quality matters.

Features and Benefits:

• OSHA-compliant guards
• Round and tripod pedestal models available
• Matched direct-drive motors and blades for highest achievable levels of airflow - rated up to 12,000+ CFM
• Energy-efficient design for additional cost savings - draws as little as 1.6 amps
• Heavy-duty, maintenance-free, 2- and 3-speed motors for long life
• Optional wheel kit (FPR-Wheelkit-B) and mist rings available for select models

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

TW30B-PRB 30" Twister Oscillating Circulation Fan, Black OSHA Guards, Black Round Pedestal by Schaefer

Geared for performance, Twister's oscillating motor utilizes highest quality metal gear design for unparalleled strength, greater load capacity and higher accuracy. Whether aimed at a workstation or down an assembly line, Twister provides the versatility and performance needed to improve worker productivity and safety.

Features and Benefits:

• SCHAEFER oscillation technology
• 2-speed high efficiency motor with 10 foot cord
• OSHA compliant guards, available in black or white
• 90° of total oscillation
• 45° of fan head adjustment up or down
• Four sizes 20", 24", 30" and 36" for optimizing air flow needs
• Low noise levels, quieter than conversational voice
• Fixed or portable mounting capabilities
• Two year warranty
• Assembled in the USA

VTS-L5131000203 Ventis MX4 Multi-Gas Monitor, LEL (CH4), SO2, CO, O2, Li-ion, No Charger, Without Pump, Black, ATEX/IECEX, Spanish by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

65-2667RK-CH4 M2A Stand Alone Sensor / Transmitter with J-box, CH4, 0-100% LEL, explosion proof detector with replaceable sensor, UL 2075 by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

• Operates with or without a controller
• Direct digital readout with OLED cold temperature display
• Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
• Infrared sensor for combustibles and CO2
• 4-20 mA & digital Modbus outputs standard
• 2 fully programmable alarm relays & fail relay
• Non-intrusive calibration via magnetic wand
• Explosion proof construction
• Patented water repellent sensor cover
• User friendly setup, push buttons & OLED menus
• Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

66-5900-9 AirLink 5900 4-20mA to Wireless Converter, 900 MHz Radio, 12-35 VDC Wire Powered by RKI Instruments

The AirLink 5900 converts any 4-20 mA signal into a wireless signal including gas, flame, tank level and many other sensor types. The AirLink 5900 is wire-powered operating from 12 to 35 Volts DC. Magnetic switches allow for non-intrusive controls of full system settings and diagnostics.

Features

• Convert any 4-20mA signal to wireless
• Wireless communication: 900 MHz radio and 52 networks; 2.4 GHz radio and 78 networks
• Operating voltage: 12V to 35V
• Graphical LCD with LED backlight, readable in sunlight
• 3 Push-button interface (ADD, MENU, SUB) with 3 corresponding magnetic, non-intrusive switches
• Aluminum enclosure
• Connectivity with any 4-20 mA sensor
• 1-Year warranty

Industry Applications

• Petrochemical plants, refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants
• Construction
• Temporary or permanent applications

*Please note we can only ship RKI products to customers within the United States