All Products

65-2405RK S2 Series LEL Sensor (Catalytic)/Transmitter with Explosion Proof J-Box, UL Version, (Specify Calibration) by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

61-1004RK-10 Sensor, IR, Carbon Dioxide (CO2) 0 - 100%, Explosion Proof with J-Box, UL Version by RKI Instruments

When working on potentially hazardous jobsites, safety managers should look for workplace safety solutions that are dependable and steadfast. When lives are on the line, a workplace cannot afford subpar safety products. That is why, at RKI Instruments, workplace safety is a top priority. Their Research and Development team work daily to integrate the latest technology with the best industry practices. With a reputation for excellent products, RKI Instruments introduces the latest in direct connect sensor technology. Designed for use in Class 1, Division 2 hazardous environments, the Direct Connect Sensors are designed specifically for RKI Beacon 110, 200, and 410 controllers.

Direct Connect Sensors

The RKI Direct Connect Sensors series gas sensors are state of the art gas detection sensors available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and a variety of toxic gases. To use the Direct Connect Sensors, they can be used for remote detection by mounting them onto explosion proof junction boxes, or they can mount directly onto controllers and be used as a completely standalone system. Their unique plugin design allows for a quick and easy tool free installation on jobsites.

Detection solutions for a variety of hazardous environments

The Direct Connect Sensors are designed to be use in both indoor and outdoor settings. Additionally, some of the sensors are available in explosion proof models. The explosion proof models utilize a patented coating which serves double duty as also being water repellant. Users can also purchase splash guards to protect the sensors from very wet conditions.

Sensor Technology

Each sensor is crafted with stainless steel and housed in cast aluminum (stainless steel housing is available for some sensors). The Direct Connect Sensors are available in 2 forms: explosion proof and non-explosion proof. The explosion proof sensors are available as catalytic sensors for LEL, and LEL H2 specific. For hydrogen sulfide and carbon monoxide, the sensors utilize electrochemical technology which provides incredibly specific accuracy and quick response. Oxygen sensors work with galvanic technology, and infrared sensors for methane, hydrocarbons, and carbon dioxide. Non-explosion proof uses a galvanic sensor for oxygen; electrochemical sensors for hydrogen sulfide, carbon monoxide and other toxic gases; and infrared for carbon dioxide. Both explosion proof and non-explosion proof have 1 year warranties for materials and craftsmanship.

Specifications

The response times are under 30 seconds for all gases except hydrogen sulfide and carbon monoxide in the non-explosion versions (with a response time of 35 seconds) and non-explosion proof model sensor for toxic gases which has a 60 second response time. The life expectancy of all sensors are between 2 and 5 years.

The Direct Connect Sensors are compatible with several RKI Industries' accessories including calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors, and dataloggers.

*Please note we can only ship RKI products to customers within the United States

Part Number: 116L-441

M004-0031-000 mSquad 4 Kit (1 Head and 3 Soldiers In 1 hard case), 4-gas (LEL/O2-LF/H2S/CO) by mPower Electronics

The mSquad System is a quickly-deployable set of mobile multi-gas meters that communicate wirelessly to a Squad leader up to 0.8 km (0.5 miles) distant. The system is ideal for Hazmat Response, firefighters, temporary venue protection, etc. An mSquad consists of one Head monitor (MP400H) and up to 7 Soldier monitors (MP400S) that communicate with each other. Each 4- or 5-gas monitor has options for a full range of sensors for toxic gases, oxygen (O₂), combustibles (LEL) and carbon dioxide (CO₂). The MP400S can also have a PID for volatile organic compounds (VOCS). In addition to high gas concentration alarms, all Squad units receive any Man-Down alarms to notify them remotely of a worker in distress. All the Squad monitors are Class I Division I certified to operate in hazardous zones. The entire mSquad is mobile, running on batteries for up to 12 hours. The MP400S and MP400H have rugged construction and easy-to-learn 2-button operation.

Features, Functions and Benefits

• Remote, wireless real-time readings and alarms including Man-down
• Up to 8 remote 4- or 5-gas monitors
• Up to 0.8 km (0.5 miles) distance to Squad Head
• All mSquad units alarm if any one unit has an alarm condition
• Mobile system operation
• 12-hour continuous operation on single Li-ion battery charge.
• USB Micro cable for battery charging and direct PC communication
• Wide selection of sensor types

183A True RMS DMM with Temperature, Capacitance, Duty Cycle and Low-pass Filter by Test Products International

The 183A is a hand-held autoranging DMM. The 183A measures ACV, DCV, ACA, DCA, Resistance, Frequency, Duty Cycle, Diodes, Capacitance, Temperature and Continuity. The meter is also easy to use and built to last.

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• Range: Allows the user to manually range the 183A instead of autoranging.
• Hold: Holds the reading on the display for easy viewing.
• REL: Displays the value as a difference to a reference value.
• Auto Off: Preserves battery life.
• Rubber Boot: Added protection when the instrument is dropped.
• 0.5% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 32.6MΩ; max resolution 0.1Ω
• Audible continuity
• 0 to 10 amps AC/DC; max resolution 0.1uA
• Analog bar graph
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Continuity of circuit breakers
• Temperature with optional temperature adapter
• Bar graph to indicate rapid fluctuations in measurements

The 183A comes complete with the following accessories:

• 183A Instrument
• Zippered Vinyl Carrying Case
• Rubber Boot
• Test Lead Set
• Instruction Manual

*Please note we can only ship RKI products to customers within the United States

GPA-0001-NU-A Gas-Pro 4-Gas Monitor, Non-pumped No Flow Plate, CO/H2S/O2/CH4, Multi-region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

3743-200 Dynagard Stand-alone System, Hydrogen Cyanide (HCN) by GfG

Single-point Area Monitors

Dynagard AutoCal^® monitors are single point detection instruments that accurately measure toxic gases and oxygen levels. Alarm lights on the front panel illuminate and an internal horn sounds when gas concentrations are exceeded.

Simple and effective

The units accurately display values on a large backlit LED and can transmit a linear 4-20 mA output. AutoCal® calibration and maintenance is done effortlessly through front panel push-buttons. Smart sensors enable the user to change measuring ranges or gas types in the field without a need for additional programming. The Dynagard is equipped with onboard relays for two adjustable alarm points. It also has one sensor fault for local connection and activation or deactivation of external devices like strobes, fans, auto dialers etc.

Features

• AutoCal® automatic calibration
• Smart sensor technology
• Digital display / control connection
• Internal push-button alarm settings

MCXL-X0HM-Y-OE GasAlertMicroClip XL Detector, Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing, OE Version (Other Regions, 2-pin UK plug) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXLX0HMYOE

WD-35801-71 Single-junction, Epoxy-body, Gel-filled pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature

Part Number: 34L-99-100

GHS1271 Health Hazard Pictogram Placard (10.75" x 10.75") by GHS Safety

These large format HazCom GHS Pictograms are 10.75" x 10.75" (273 mm x 273 mm) and perfect for marking your containment vessels or tanks. Printed on outdoor grade peel and stick vinyl with durable fade resistant inks, these pictograms are made to withstand the elements.

They come with a back split liner for easy application and are sold individually or in packages of 100.

5600-3232 GDX-350 Gas Sensor Transmitter/Monitor, [Propane] 0-100% LEL, IR, 3-wire - with Relays and Modbus by Bacharach

Bacharach's new state-of-the-art GDX-350 transmitters, with Smart Sensor technology, provide accurate and continuous detection of toxic, combustible and asphyxiate gases. The full-featured design of the GDX-350 includes a large LCD display, a 4-20 mA interface, programmable alarms, optional relays and a Modbus interface. Exclusive pre-calibrated replacement sensor technology makes occasional maintenance practically effortless. Rugged construction, intrinsic safety capability (in two-wire mode with barrier) and an explosion-proof housing allow the GDX-350 to operate directly in hazardous-rated areas of many industrial environments, delivering reliable, superior-sensing performance to protect human life, equipment and property.

With its large LCD display, the GDX-350 shows gas concentrations, engineering units and bar graphs along with the most recent 30 minutes of trend data. Utilizing the on-board magnetic keypad, users can also navigate through the display to change alarm set points, instrument configurations, or enter into maintenance mode for non-intrusive sensor calibration. For security, menu options also enable the selection of an authorization code to lock critical parameters. Accompanying the LCD display are standard LED alarm indicators that show when low and high alarm conditions are met. An optional relay board is available to provide three 5-amp relays that can be used to drive audible/visual alarms, or activate exhaust fans.

Features & Benefits:

• Pre-calibrated Smart Sensor capability with 'plug-n-play' convenience minimizes maintenance and downtime
• Non-Dispersive Infrared (NDIR), Catalytic Bead and Electrochemical sensor options available
• Can be placed directly in hazardous environments where leaks occur for quick detection and rapid response
• Graphic LCD for real-time monitoring of concentrations
• 4-20 mA, optional Modbus RTU® and wireless interface
• Easily update alarm set points, configurations or maintenance modes using the LCD display
• 30-minute onboard data trend

65-2340RK-PH3 S2 Series Phosphine (PH3) 0 - 1 ppm Sensor/Transmitter, Non Explosion Proof with J-Box by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

610-1000-000 Single-Gas Calibration (Carbon Monoxide, 50 PPM, Balance Air), 116 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve