All Products

1-Phase/Single-Speed Motor, 1/2 Hp, 115/230V, 60 Hz, 825 rpm

VKM42-2-B-O 42" Versa-Kool Mobile Spot Cooler Fan, 1 Hp, 2-Speed, OSHA Guards, Black by Schaefer

Schaefer Versa-Kool® mobile drum fans are the portable solution for moving large amounts of air at higher velocities. Designed with "Schaefer-Tough" polyethylene housing and rugged base for impact resistance and to withstand the elements, the fan is ideal for portable personal comfort or livestock and equipment cooling needs in any industrial, commercial or agricultural facility.

Features and Benefits:

• OSHA compliant guards
• Incredibly quiet for its size and performance levels
• Extremely high airflow and air throw, rated up to 18,000+ cfm
• Single and two-speed models available
• UL approved power cord included
• Stacking on OSHA compliant models, excluding 24" models
• Two year warranty
• Made in the USA

In addition, VKM models feature:

• Rubber wheels designed in-line with housing
• Galvanized steel base for complete corrosion resistance inside and out
• Narrow fan profile with ergonomic pull handle and integrated base assembly handles
• Stacking capability up to four fans high

2401906 Sample Cells, Hach, 6 pack by AquaPhoenix

6 sample cells with caps, glass. Up to 25 mL sample volume.

FS20X-211-22-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m² (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

• Patented WideBand IR™ Infrared combined with Ultraviolet
• Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
• Patented Electronic Frequency Analysis
• Visible sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Solar blind 90° cone-of-vision
• Dual microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ - Up to 6 pre-fire event data storage
• Event log - Up to 200 events with date and time stamp
• Built-in RS-485 ModBus communication
• Built-in non-isolated 4-20 mA analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic Optical Path and Electronic self-test
• Patented Electronics Module for component protection with plug-in terminations for easy field installation
• Two 25 mm conduit entries or two 3/4" NPT
• Low power consumption
• High RFI and EMI immunity
• FM hazardous area approved
• Ex d ATEX approved
• CU-TR approved
• INMETRO approved
• Meets SIL 2 requirements
• Certified to EN54-10:2002 (option)
• FM 3260 performance

BENEFITS

• Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
• Wide operating temperature range
• Arc welding immunity
• False alarm rejection
• Minimal maintenance for trouble-free operation
• PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
• Suitable for a wide variety of applications

APPLICATIONS

• Refineries and oil production facilities
• Off-Shore platforms
• Turbine/Compressor enclosures
• Acetylene processing and storage
• Oil and Gas pipelines and pumping stations
• LNG/LPG loading and unloading facilities
• Natural Gas and CNG plants
• Ethanol, Methanol, and IPA production and storage
• Crude oil and gasoline storage and tank farms
• Aircraft hangars
• Hydrogen plants and storage
• Paint and solvent storage
• Chemical production, storage, and loading facilities
• Power plants
• Silane gas storage

CS300-B-1-N-N-A Process Graphite Contacting Conductivity Sensor, 0.1, PT1000, No Cable by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

• Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
• Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.

MX6-RJABQ211 MX6 iBrid Multi-Gas Monitor, PID, CO/H2S, HCl, HCN, CO2 (IR), Lithium-ion Extended Range Battery, UL/CSA/ATEX/IECEx, Pump, English by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

Part Number: H196270VN

0560 5522 01 552 Digital Vacuum / Micron Gauge with Bluetooth by Testo

The testo 552 digital micron gauge is ideal for monitoring the evacuation of air conditioning, refrigeration, and heat pump systems. It is rich in features that make your work faster, easier, and more accurate.

Precise deep vacuum measurements, measuring down to single digit resolutions use optimized Pirani sensors. The testo 552 has real time calculations for the saturation temperature of water, which determines the proper micron/temperature levels at which moisture is removed from the system. These internal calculations inform you when/if the pressure is low enough to meet your evacuation target. This saves time and provides you with the assurance that the system is now free from moisture and contaminants. User defined alarm points alert you when target values are reached.

The new testo 552 with Bluetooth links to your smart phone or device. The testo 552 uses the free testo SMART Probes App which is a powerful and easy-to-use tool. It allows you to remotely read measurements of 1 to 6 Smart Probes including the testo 552. You can easily document / report the results.

• Precise and reliable vacuum measurements, 1 micron resolution
• Displays the saturation temperature of H2O to ensure full and proper evacuation
• Illuminated, backlit display with visual alarm for evacuation pressure
• Wireless Bluetooth communication to smart phone or tablet provides powerful analysis and reporting
• Display data, create reports, and send via email or SMS

1438901 Digital Titrator Refill Cartridge: Sulfuric Acid 1.600 N by AquaPhoenix

For determination of alkalinity by Digital Titrator titration. Hach method 8203.
1.600 N Sulfuric Acid. Digits = mg/L CaCO3 in 100 mL, Digits × 0.002 = meq.
Approximately 40-100 tests.

• Accurate results - when and where you need them
• Fast and Flexible
• Versatile
• Economical

18109331-031 DSX StandAlone Docking Station for GasBadge Pro, 3 Inlet Ports, North American Power Cord by Industrial Scientific

The DSX™ Docking station is an automated gas detector maintenance, record storage, and fleet management solution that flexes with the needs of your business. Choose from DSX-L Local Server, DSXi Cloud-connected, or DSX Standalone based on your data access requirements. All DSX Docking Stations offer automatic charging, bump testing, and calibration.

• Email alerts and notifications provide information on worker exposure, instrument usage, and instrument service needs
• Print bump test and calibration certificates for hot work and confined space entry
• Auto detect calibration gas type and expiration date upon cylinder connection
• Calibration gas status indicators provide warning to order replacement gas before a cylinder is empty
• DSX Standalone requires no PC or network connection
• DSXi Cloud-connected provides cloud-based record storage with automatic file back-up, fleet management, and automated maintenance and notifications through iNet Control
• DSX-L Local Server provides server-based record storage, fleet management, and automated maintenance and custom data reporting

*Please note we can only ship RKI products to customers within the United States