All Products

PP101 Signal Splitter, 1 Meter Output to 2 Devices by Quantrol

The Carlon Meter Power Pack 101 provides a means to have separate, independent circuits signaled from the output pulse signal of a dry contact meter (Carlon JSJ Series, for example) or a reed switch or "hall effect" meter. Sometimes called a "splitter", the unit provides two isolated output signals, which carry independent voltage from two respective sources. Sources can be a controller, a remote counter, or some other receiving device.

The unique circuitry of the PP101 is designed to isolate any excessive power supply signal value from the dry contact switch on the meter. Excessive power signals can permanently damage reed or hall effect switches. A wiring terminal strip is provided to offer a variety of components that can be used with the Power Pack 101.

PP1402-B Potassium Permanganate Reagent, 60mL by AquaPhoenix

• Dropper Pipet

Specifications

• Packaging Type: Poly
• Size: 60 mL

PP1404-B Potassium Permanganate Reagent, 60mL by AquaPhoenix

• 1 drop = 50ppm as NaNO2/ 25mL

Specifications

• Packaging Type: Poly
• Size: 60 mL

1557C Radiant Heater, Infrared 16,000 BTU, Propane with 25' Hose & Regulator by Pelsue

The model 1557 is a portable radiant infrared construction heater. It's durable and features both a thermal sensor (thermocouple) and tip-over protection, making it ideal for use inside of a Pelsue work tent. With a protective grate and carrying handle this heater can be relocated even when hot. These features make this heater and excellent shop heater that's sure to last for years to come. The heater is adjustable from 8,000 to 16,000 BTU, and runs on propane. This heater is safe for use in both the U.S. and Canada and is CSA certified.

6508LGH Fiber Optic Splicing Tent, 8' x 8', with Heavy Duty Floor and Case by Pelsue

This Pelsue Innovation features a heavier poly-cotton breathable fabric and solar fly sunshade. The walls are solid white and constructed of acrylic for "breathability" and increased light. Cable slots with "velcro" style closures allow easy access to cable while doors are shut. May be used with Pelsue heaters (Model 1590, 1690D). Options include a fiber optic splicing table, part number 107022-001 and "Velcro-in" floors.

6510D Ground Tent, Yellow and White, 10' x 10' x 6.5'H, with Case by Pelsue

D-Series tents are highly durable and portable general purpose work tents. Most importantly they feature inter-connectable flaps that allow two tents to be attached together, once attached entrance can be gained through the flaps. D-Series tents may be combined with DRAD tents which feature a rear access door if desired. This makes D-Series tents perfect for situation where you want separate but connected work-spaces. As with all Pelsue tents the primary fabric is water, mildew, UV, and flame retardant (to CPAI-84).

Includes:

• One-piece, instant set up
• No loose parts
• Two screened windows (most models)
• Tie-down cords through hubs
• Ground flaps for weight anchoring
• Rubber, non-slip feet
• Exterior, roof level D-rings
• Carry case & three tent stakes
• Heavy duty frame
• Wide open front
• Snap and D-rings with interconnecting flaps (connects 2 tents together)
• Ventilation hose entry sleeve
• Interior and exterior roof line loops for tie down
• Tent Stabilizing Feet (6510C only)

DSC-S2 Sleeve Cap, Powder Coated Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Sleeve Caps

Used to seal sleeves when not in use. Available in zinc plated steel, stainless steel or ABS plastic. Has a rubber seal that expands into sleeve

PWQR Winch - Quick Release, Confined Space Retrieval by Pelsue

The PWQR Series of hoists are designed for use lifting personnel in situations where a quick release is required. These hoists feature a quick release, which means that the rope is not used permanently affixed to the winch drum. Thanks to this feature these hoists may be used when safety considerations dictate that it's safer to not be permanently tied off. These hoists also have a backup pawl system to prevent "free-wheeling", and an internal braking system to prevent line play out. Line extension should only occur when the handle is turned in a counter-clockwise direction and a force of at least 10 lbs. is applied. OSHA compliant for confined space entry and exit.

Features

• Secondary pawl system to prevent "free-wheeling"
• Internal breaking system to prevent line play out.
• Man-rated for 310 lbs.
• Supports a maximum of 70' of rope.

PT4940-P PTSA Standard, 400 ppb, 500mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 500 mL

QFP5X3-304 75 GPM, 304SS Housing, Qty 5, 30" by Quantrol

QFP Series Band Clamp Filter Housings are designed for Commercial and Industrial liquid filtration applications. These multi-cartridge filter housings are available in 4, 5, 7, 12 or 22 round configurations for flow rates up to 660 GPM. Housings are available in your choice of 304 or 316 poly-coated stainless steel. Universal seal cups and compression plates allow for use of DOE, 222/Flat or 222/Fin style cartridges.

Features

• Heavy Duty 304 or 316 Stainless Steel Construction
• External Poly-Coat Finish
• Easy Access Band Clamp Closure
• Welded on Mounting /Support Legs
• Gauge/Drain & Vent Ports Standard
• Accepts DOE, 222/Flat or 222/Fin Style Cartridges
• Adjustable Top Plate with spring seal assemblies
• Buana O-Ring
• 150 PSI Maximum Pressure
• 250° F Max Temperature
• Manufactured in the USA

G02-0007-000 ToxiRAE Pro CO2 Personal Monitor - NDIR CO2 Sensor, Datalogging, Rechargeable Battery, Rubber Boot by RAE Systems

The ToxiRAE Pro CO2 is the world's first wireless personal carbon dioxide monitor. It provides safety professionals with wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response.

The ToxiRAE Pro offers datalogging capability and is equipped with a "Man Down" alarm and policy enforcement to ensure greater safety while making sure compliance-related procedures such as periodic testing and calibration are performed.

ToxiRAE Pro CO2 comes with

• ToxiRAE Pro CO2 monitor with sensor and wireless option as specified, rechargeable battery, alligator clip, and protective rubber boot installed
• Charging and PC communication cradle
• PC communication cable
• AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC)
• Calibration adapter
• Quick Start Guide
• CD with documentation
• CD with ProRAE Studio II Instrument Configuration and data management software
• Calibration and test certificate
• Warranty/registration card

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensor stores calibration data, so it can be swapped in the field
• Largest display in its class
• Continuous datalogging
• Easy to use
• Reliable and rugged

Applications

• Chemical manufacturing
• Food and beverage
• Wineries and breweries
• Landfills
• Water and wastewater facilities