All Products

WD-17000-04 InnoCal NIST-Traceable Calibration; RTD Meter (Meter) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

InnoCal's Metrology Laboratory is accredited to ISO/IEC Guide 25 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

WD-35419-20 Ion 700 Meter with Double-junction Glass, Refillable pH Electrode, ATC Probe, and Stand, 110/220 VAC 50/60 Hz by Oakton

Large display allows you to see measurement values at a glance

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC connectors.

• Custom 3-1/4" x 2-7/16" LCD display
• Small size conserves valuable benchspace
• Store and recall up to 100 data sets

WD-35419-32 CON 550 Replacement Conductivity Cell K= 1.0 by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.

WD-98767-77 Traceable One-Shot Buffer Solution, Red, pH 4.005; 6 x 100 mL Vials by Oakton

• Convenient, single-use vials eliminate concerns of cross-contamination; each pack contains six polyethylene vials with 100-mL of pH buffer per vial
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days

Oakton® Traceable® One-Shot™ pH Buffer Solutions are supplied with NIST-traceable calibration reports stating accuracy at 25°C to ±0.010 pH, in addition to conversion values for pH/temperature - for the most accurate calibrations!

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

Key Features

• All Oakton® Traceable® pH buffer solutions are NIST-traceable reference materials
• Supplied with calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• Individually packed in foil pouch to prevent UV exposure that may degrade accuracy
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• Use to calibrate pH instruments to 4.005
• Color-coded buffer for easy identification

Includes

Individual temperature compensation chart and NIST-Traceable calibration certificate with data

11304 VIS500 Inspection Camera with 1.5" & 1" Camera Head with Locator by Wohler

Perfect images for your daily challenges

To get a clear view, rely on an inspection camera from the specialist: The Wohler VIS 500 inspection camera offers the tried and tested case system with brand new technology – and this allows you to proceed even more purposefully during your operations. Thanks to the exchangeable camera heads, you are perfectly equipped for all operations. You simply control pan and tilt camera head via a key pad, so that you have everything in view even in dark pipes. The monitor then provides you with sharp and true-colour images on which you can see every detail exactly. This means you no longer spend your time in assumptions or misjudgements. Instead, you plan your operation on the basis of your video inspection. You can choose to store images and videos in the camera's large internal memory or on a USB stick.

Report in the app

With the Wohler VIS 500 inspection camera, you are perfectly equipped for the future The camera's WLAN interface makes it possible to view images and videos in the large camera display and simultaneously in the smartphone or tablet display. This way, several people can follow the inspection live at the same time, even if they have positioned themselves quite differently. The image files are transferred from the camera to the app via WLAN and after the inspection you can create an illustrated report in just a few minutes, which you can send directly from your smartphone to your office address, the customer or the insurance company with one click.

Absolutely suitable for technicians

We know your everyday life and have thought of everything: You don't have to be squeamish with the Wohler VIS 500. If the camera is dirty, take the rod and pole out of the case in one easy step. Then spray the case and reel with water. It couldn't be easier.

• The universal camera for your applications: Interchangeable camera head, sound and voice recording via headset and different rod lengths
• Waterproof rotatable and pan and tilt camera head Ø 1.5" for an all-round view
• Future-proof thanks to Wohler video inspection app: operation, image view and report
• Convincing image quality with true-colour for fast and safe work
• Double-shell case with separate compartment for the camera rod for cleaning with water
• Bright illumination with camera LEDs and optional additional lighting
• Intuitive handling with uniform operating concept of the Wohler VIS series

Additonal Information

• Wohler VIS 500 monitor with 7" TFT widescreen color monitor incl. 6' connection cable
• Glare shield
• Lithium-ion battery
• Wohler pan- and tiltable camera head Ø 1.5", detachable
• Wohler miniature camera head Ø 1", detachable
• Camera push rod 0.25" - 100' long (removable for cleaning)
• USB charger with USB-C cable
• Double shell case
• 3 replacement plastic domes
• Guidance sleeve for 1" camera head
• Guidance ball
• Wohler L 200 locator

7335 DM2000 Digital Manometer Set by Wohler

Additonal Information

• Wohler DM 2000 Digital Manometer
• 5' hose
• Hand loop
• Carrying case
• Batteries (installed)

3475-80/S50 6 LED Blast Light, Polyurethane-Wrapped Aluminum, No-Air, 50Ft Cable, Power Box, and Cord Plug Includes 3112HC-LED Stanchion by Western Technology

The 3475 6-LED NO-AIR POLYURETHANE-WRAPPED ALUMINUM BLAST LIGHT is the most quality light for blasting in its class. It packs a big punch with a refracted optical design for targeted focus at a 25 degree beam angle, making it the perfect choice for your lighting needs.

Features

• LEDs emitting color at 6000K (+/-200K)
• Rated at: 1200 lm
• Refractive optical design for targeted focus at 26° beam angle
• Option to power directly from 12-28V AC/DC source
• Polyurethane-Wrapped Aluminum Body: Extremely durable & light weight
• Replaceable blast lens
• Dimensions: Length= 7" x Halo Diameter= 3"
• Weight: Lighthead 2 lbs, full system 8.5 lbs
• Mounting - Blast hose:Hand held
• Utility:Blast:Boiler Inspection:Hydro/Water Blast

4100LED-24V-100 Three Directional Wide Area 24V Light with Magnetic Mount and 100 ft. 14.2EC and 25W 12-24V LED Bulbs by Western Technology

As one of our 4000 series SITE LIGHTS, The 4100LED is perfect for portable temporary job site lighting for ordinary locations. We have refitted our SITE LIGHTs with a PAR38 LED bulb, ensuring white bright light, low voltage, and no more fragile filaments of incandescent bulbs. Manufactured out of polyurethane, and equipped with (2) 150lb pull magnets for mounting.

4100 LED: This 3-Way mountable area light is the leader in portable light for larger work areas. With quick and sure placement this is the perfect choice for your temporary job site lighting needs.

Features

• Light Output: 2000 Lumens (1 PAR 38 LED lamp) x3
• Brightness @ 48": 1970 LUX @ 41" Diameter (1 PAR 38 LED Lamp) x3
• Light Distribution: 180°
• Emitter Type: LED (PAR 38 LED Lamp)
• Color Temperature: 5600K
• Power Consumption: ~25 Watts (1 PAR 38 LED Lamps) x3
• Voltage Versatile: 12 to 24 Volts AC/DC or 115 Volts AC
• Durable polyurethane construction is naturally rust and corrosion resistant and is easily cleaned or decontaminated
• Length: 16 1/2"
• Width: 9 1/2"
• Height: 12"
• Weight: 16 lbs
• Portable LED light fixture with magnetic mounts
• Quick & sure placement using 150 lb. pull industrial magnets
• Vibration/ impact resistant
• Remains cool to the touch during operation
• Uses Western Technology PAR 38 LED Lamps (3)
• Suitable for use in -25° to +120° ambient temperature
• Comes standard with 25 ft electric cable (longer lengths available upon request)
• Optional protective lamp guards offer additional protection against bulb breakage

4100LED-250 Three Directional Wide Area Light with Magnetic Mount, LED Bulbs, & 250' Electric Cable by Western Technology

As one of our 4000 series SITE LIGHTS, The 4100LED is perfect for portable temporary job site lighting for ordinary locations. We have refitted our SITE LIGHTs with a PAR38 LED bulb, ensuring white bright light, low voltage, and no more fragile filaments of incandescent bulbs. Manufactured out of polyurethane, and equipped with (2) 150lb pull magnets for mounting.

4100 LED: This 3-Way mountable area light is the leader in portable light for larger work areas. With quick and sure placement this is the perfect choice for your temporary job site lighting needs.

Features

• Light Output: 2000 Lumens (1 PAR 38 LED lamp) x3
• Brightness @ 48": 1970 LUX @ 41" Diameter (1 PAR 38 LED Lamp) x3
• Light Distribution: 180°
• Emitter Type: LED (PAR 38 LED Lamp)
• Color Temperature: 5600K
• Power Consumption: ~25 Watts (1 PAR 38 LED Lamps) x3
• Voltage Versatile: 12 to 24 Volts AC/DC or 115 Volts AC
• Durable polyurethane construction is naturally rust and corrosion resistant and is easily cleaned or decontaminated
• Length: 16 1/2"
• Width: 9 1/2"
• Height: 12"
• Weight: 16 lbs
• Portable LED light fixture with magnetic mounts
• Quick & sure placement using 150 lb. pull industrial magnets
• Vibration/ impact resistant
• Remains cool to the touch during operation
• Uses Western Technology PAR 38 LED Lamps (3)
• Suitable for use in -25° to +120° ambient temperature
• Comes standard with 25 ft electric cable (longer lengths available upon request)
• Optional protective lamp guards offer additional protection against bulb breakage

6300-1RL100LDREXP Explosion Proof LED Wide Area Light with Handle, 100' 14 / 3 Wire on a Ladder Mount by Western Technology

The 6300-1 LED Explosion Proof Mountable Area Light is durable and versatile, with its minimal power consumption and 6000+ hour LED life, it works well for a variety of applications from blasting & painting to offshore drilling. This is a perfect choice for your mountable area lighting needs.

Features

• Certified for Use in Hazardous (Classified) Locations, Class I, Divisions 1 and 2, Groups C and D; Class II, Division 1, Groups E, F, and G; Class II, Division 2, Groups F and G
• Suitable for Wet Locations
• Fixture weight: 30 lbs. (13.6kg)
• Tempered glass lens
• Color Temperature: 5000K (cool white)
• Ambient Temperature Ratings (T4a): -40F to + 149F (-40C to +65C)
• Ambient Temperature Ratings (T5): -40F to + 131F (-40C to +55C)
• Lumens: 11,000 lm
• Wattage: 146W
• LPW: 75

8100-4LH LED Lighthead, 100ft 14/3 SOOW cable, NON-EXP Proof Power Box and Plug, Long Handle, Includes Hook and Dome Diffuser by Western Technology

Shine a light on the darkest of work site conditions with The STRIKER™: 8100 LED, the ultimate explosion proof long handle work light. From typical hand-held use to hook mounting this versatile light harnesses the best of portability and durability for almost any application! Part of our Kick-It Tough™ Explosion Proof Lighting!

Features

• Blasting, Drop Light, Inspection, Painting ... One Work Light, Many Applications!
• Approved for: Class I, Div 1 & 2; Groups C & D
• Approved for: Class II, Div 1 & 2; Groups E, F, & G
• Approved for: CSA Zones 1 & 2; Zones 20, 21, & 22
• Rated for use in Canada
• Certified portable luminary
• Complies with explosion proof/hazardous location requirements
• XP-G Cree LED
• 7 Cool White LEDs emitting color at ~6000K with CRI of 70
• >1,750 lumens
• Standard Optic 50 degree refractive
• Optional Optics: 30, 45, or 60 reflective
• Temperature Rating: T5 (-40C to +40C) / T4 (-40C to + 100C)
• Options: Mounting Hook, Diffuser