All Products

01-29824 Peabody Gemini Square Dual Containment Tank, Blue, 70 Gallon 1.5 Specific Gravity by Quantrol

Features and Benefits of Gemini Tank System

• Specifically designed for the Water Treatment Industry
• Linear polyethylene construction. Polypropylene, XLPE and PVDF available - Superior chemical resistance for acids, caustics, sodium hypochlorite, biocides, etc. Handles aggressive applications that stainless steel and crosslink polyethylene will not.
• Heavy duty dual wall construction - Rated for liquids of 1.5 or 2.0 specific gravity. "Tank in a Tank" designed for instances where the primary tank fails; the chemical will then be safely contained in secondary tank.
• Integral pump mounting platform - Lid has 240 pound rating allowing for use with metering pump or mixer mounted directly to tank lid. Sump reservoir collects and drains pump spilled liquid back to primary.
• Pump pick-up tube port - Install pump suction line with check valve quickly and easily. Once installed, tank contents are sealed from outside environment.
• Integral mouse door - Molded directly into most Gemini models, recessed mouse door allows for inexpensive installation of optional bottom bulkhead fitting for flooded suction connection or bottom fill.
• Custom colors and mold-in graphics - Custom colors available, subject to minimum order quantity. Private label mold-in graphic is molded directly into tank and wont weather, crack, peel, or deteriorate.

65-2646RK-05-02 M2A Stand Alone Sensor / Transmitter with J-box, Carbon Monoxide (CO) 0-200 ppm, RF Resistant, CSA Version by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

• Operates with or without a controller
• Direct digital readout with OLED cold temperature display
• Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
• Infrared sensor for combustibles and CO2
• 4-20 mA & digital Modbus outputs standard
• 2 fully programmable alarm relays & fail relay
• Non-intrusive calibration via magnetic wand
• Explosion proof construction
• Patented water repellent sensor cover
• User friendly setup, push buttons & OLED menus
• Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

VPX-20002100G1C Ventis Pro Series, H2S, Li-ion Ext Range, Desktop Charger, None, Black, China Ex, CPA, LENS Wireless, Chinese by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

5100-6B 5000 Series Control Panel, 6 Channels, 2 Amp Power Supply with Blue Strobe by GfG

The 5000 Series can control up to six individual gas transmitters (sensors) and it is possible to extend the GMA 200 controller with up to four relay modules resulting in up to 64 additional freely configurable relays. The clearly structured layout with graphical display enables the quick detection of hazardous situations. Currently measured values are displayed on the LCD graphical display.

GMA 200-MT Controller

The GMA 200-MT is at the heart of the 5000 Series and is the most flexible and advanced gas detection system controller. The design of the GMA 200-MT ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

Integrated relays

GMA 200-MT systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Flexible modular design

Each GMA 200-MT module can control up to 6 individual gas transmitters (sensors). The compact DIN rail mounted design facilitates cost-effective and space-saving installation in existing or custom control cabinets. GMA 200-MT systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touch-screen computer interface.

Easy to configure

Easy-to-use, menu driven GMA 200-MT software allows configuration of sensor type, gas type, measuring point designations, units of measurement, calibration curves, and function of the comprehensive and fully programmable relays. Up to three individual or specified alarm thresholds can be programmed for each measuring point. The GMA 200-MT continuously evaluates the analog input signals of the connected detectors.

Relay modules

Each GMA 200-RT relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MT system. Digital connection with the GMA 200-MT controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs. Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MT system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart phone to display or access system information.

LED indicator lights

The status of the GMA 200-MT system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Operation via keyboard

Operation of the GMA 200-MT is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Datalogging standard

Measured values, mean values, alarm events and faults are stored on a microSD memory card.

Configuration

A built-in USB port in the GMA 200-MT is used for connection to the configuration software.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Complete controller package available in 1-6 channel configurations
• Up to 6 analog inputs or 6 digital inputs
• Scalable system with fully programmable menu driven relays
• Rugged metal housing, steel enclosure with key lock
• Local display, with horn and strobe
• 2 amp power supply

SSRE-T-MB/EN/2000 Smart Remote Electronics, Toroidal Conductivity, Modbus 485 output, UL Enclosure, 0-2000 mS Range by Sensorex

The Sensorex SSRE is used to convert any Sensorex sensor to a smart sensor. It allows for communication in 4-20 mA and modbus. It comes in two variations: (1) DIN rail and (2) UL Enclosure.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, and Dissolved Oxygen
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

3624-206 D-ReX PoS Gas Detector with LIM and 5 relays, Propane (C3H8) MK253-10, 0 - 2% vol. (IR) by GfG

Not all gases can be monitored directly at the measuring point. This may be because the maintenance of a remote sensor would be too complicated or because the target gas has to be broken down into detectable components first. This can be done using a pyrolyzer.

In these cases, the D-ReX PoS with its integrated pump is an ideal solution. The point of sampling (PoS) can be up to 100 feet / 30 meters away from the D-ReX. This also applies to the length of the recirculation hose.

Available Accessory:

• DIN rail
• PTFE hose
• Various particle filters
• Push-Pull plug-in adapter
• Angle braces

Features:

• 5x internal relays (form C, configurable)
• Smart sensors for more than 60 gases
• Hot-swappable smart sensor cartridge
• Tool-free maintenance
• Power-over-Ethernet (PoE) communication
• Web server for browser access
• Password-protected menu
• Interface: Analog outlet: 4 20 mA output; Digital: RS-485 (Modbus/RTU); 10/100 Mbit Ethernet (Modbus/TCP)
• Bright status and alarm LEDs
• Data logger to review sensor and alarm history
• Marked as FCC, CE, IC and UKCA

Part Number: 44L-443

17535 TH - Flatwire 3 Layer 14 Hrdin by Wohler

Depending on the application different sizes and materials are needed. You can find further information about this below. Please contact us or our local partners in the US if you require further assistance.

MA873 Digital Glucose Refractometer by Milwaukee

Thousands of food and beverage professionals and hobbyists, from chefs and food quality professionals and beverage manufacturers have moved to digital Glucose measurement from less accurate and less precise optical refractometers for sugar analysis.

WHAT PEOPLE ARE SAYING

"Anyone who makes jams or beverages should find this product one of the best investments they make on any piece of equipment."

"I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers."

"Dramatically improved my commercial production consistency & efficiency.

"I used this for finishing jams and jellys. I had been trying to determine fructose content using a traditional optical refractometer. I found it very difficult to use. The digital refractometer was much easier."

SUMMARY

The Milwaukee digital Glucose refractometer is temperature compensated with a 0 to 85% Mass Glucose range and +/- 0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well.

DESIGN FEATURES

• Fast, accurate results with digital dual level LCD readout.
• Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.
• Simple one-point calibration using distilled or deionized water.
• Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.
• Battery percent level indicator with automatic shut-off (batteries included).
• Ideal for beverage producers, fruit and vegetable growers, syrup producers, and food producers.
• The measurement technique and temperature compensation employ methodology. recommended in the ICUMSA Methods Book (Internationally recognized body for Sugar Analysis).

BK-4400-G-PK Beaker, Glass 400mL - 12 pack by AquaPhoenix

With spouts and strengthened rim with flare trimmed back that offer optimum balance between thermal shock resistance and mechanical strength.

2414-1312 PCA 400 Combustion & Emissions Analyzer with O2, CO, SO2, 12 in. Probe with 7.5 ft. Viton Tubing, Case and Printer by Bacharach

MSA Bacharach's PCA® 400 is a handheld versatile combustion and emissions analyzer for commercial and individual applications. The analyzer may be configured for up to 4 gas sensors, including O2, CO, NO, NO2 and SO2. The PCA® 400's portable and durable design is ideal for testing, tuning, and maintaining burners, engines, furnaces and variety of other commercial and industrial combustion applications. The analyzer also features Bluetooth® communications which allows users to view real-time data send customizable reports from their compatible smart phone.

FEATURES

• Up to 4 Gas Sensors (O2, CO, NO, NO2 & SO2)
• Sample Conditioner
• Real-Time PC Software
• Combustion App
• Long Life O2 Sensor (5 Year Warranty)
• Automatic Dilution and Sensor Protection
• Dual Bluetooth and IR Printer with magnet
• Precalibrated, Sensor Exchange Program Sensors

Benefits

• Versatile analyser for many commercial and industrial applications
• Superior accuracy for low NOx and SOx applications
• View and save live data for easy compliance reporting
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Reduced maintenance cost and downtime
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

90447-09 RTD Probe, 6" L, 1/8" Dia, 1/4" NPT Re-Adjustable, Stripped Leads by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

66-5B05-50-W AirLink Alert Wireless Transmitter, Hydrogen Cyanide (HCN) 0-50 ppm, dual battery powered, 900 MHz radio by RKI Instruments

The RKI AirLink Alert series ambient air toxic gas detector is a versatile assembly that uses an electrochemical, infrared or PID sensor element to detect a variety of gases. Battery powered, it communicates wirelessly with controller. Magnetic switches allow for non-intrusive calibration while in the field as well as full system settings and diagnostics.

Features

• Electrochemical, Infrared, or PID sensor element
• Battery powered
• Operating temperature range of -40°C to +70°C
• 3 Push-button interface (ADD, MENU, SUB) with 3 corresponding magnetic, non-intrusive switches
• Graphical LCD with LED backlight
• Output options: wireless, 900 MHz or 2.4 GHz radio
• 1-Year warranty

Industry Applications

• Petrochemical plants, Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants
• Construction
• Temporary or permanent monitoring applications

*Please note we can only ship RKI products to customers within the United States

PVM18LC Portable Misting Fan with White 18" 3-Speed Fan, without Tank by Schaefer

The VersaMist® reduces air temperature by as much as 30°F. Low pressure mist technology combines fine mist and high speed air movement for highly effective "person" cooling indoors and outdoors. The 18", UL507 rated, 3-speed fan provides up to seven hours of use and is ergonomically designed for portability. The VersaMist is ideal for cooling work areas, rehabilitation stations, outdoor events, emergency workers, patios, and sidelines.

Features and Benefits:

• Produces up to 2600 cfm of cooling breeze
• Available with or without wheels
• Wheeled version has integrated handle and wheels for easy movement
• 10 or 14 gallon built in water reservoir for portability
• Adjustable fan head for targeted cooling
• Rapid mist evaporation produces 16,000 BTU/hour (1.4 tons) of cooling
• Pump and fan assembly separates from the reservoir for quick and effortless set up, cleaning and storage
• Integral tip switch to turn power off if unit is knocked over
• 25 foot outdoor rated power cord with integrated GFCI plug for use in standard wall outlet
• UL507 rated for outdoor use
• Two year warranty
• Assembled in the USA

PRO-100 Bacteria Tests: Hygenia PRO-Clean Rapid Protein Residue Test, 100 pk by AquaPhoenix

PRO-Clean is the easiest and most accurate way to verify the cleanliness of food equipment surfaces. Simply swab a surface and release the reagent. If protein residue is present, the reagent will turn purple - the more contamination, the quicker the color changes and the darker it becomes. PRO-Clean instantly validates surface hygiene, allowing immediate corrective action to be taken when necessary.

3614-250 D-ReX PoI Gas Detector with 5 relays, Isobutylene (C4H8) MK463-10, 0 - 2000 ppm by GfG

The D-ReX PoI's external sensor can be mounted in a location up to 4,000 feet / 1,200 meters away from the device and monitor toxic, combustible and corrosive gases as well as the oxygen concentration from there.

The remote sensor can be mounted directly onto pipe systems, gas cabinets and other hard-to-reach locations so that the gas detector itself can be mounted at eye level for easy access. This facilitates maintenance, inspections and operation.

With the optional saddle, it can also be used

Available Accessory:

• Mounting saddle
• Viton® (FKM) sealing for all saddle types
• M12 remote sensor cable, various sizes (3 to 100 ft / 1 to 30 m)
• Calibration cap for PoI
• Mounting brackets
• DIN rail

Features:

• 5x internal relays (form C, configurable)
• Smart sensors for more than 60 gases
• Hot-swappable smart sensor cartridge
• Tool-free maintenance
• Power-over-Ethernet (PoE) communication
• Web server for browser access
• Password-protected menu
• Interface: Analog outlet: 4 20 mA output; Digital: RS-485 (Modbus/RTU); 10/100 Mbit Ethernet (Modbus/TCP)
• Bright status and alarm LEDs
• Data logger to review sensor and alarm history
• Marked as FCC, CE, IC and UKCA