All Products

Part Number: 221L-359

66-6304-99-R T3A sensor/transmitter with j-box, HCl, 0-100 ppm, with 2 relays by RKI Instruments

The T3A Series Gas Detector ambient air hazardous gas detector is a versatile assembly that uses an electrochemical, infrared, catalytic bead sensor element to detect a variety of gases. Wired power (12 to 35 VDC) with 4-20 mA analog and RS-485 Modbus outputs standard. Magnetic switches allow for non-intrusive calibration while in the field as well as full system settings and diagnostics.

Features

• Electrochemical, Infrared, catalytic bead sensor element
• Wire powered (3-Wire), 12 to 35 VDC operating voltage
• Digital Modbus output
• Operating temperature range -40°C to +54°C Graphical LCD with LED backlight
• 3 Push-button interface (ADD, MENU, SUB) with 3 corresponding magnetic, non-intrusive switches
• 2 Individually configurable alarms
• 2 Front panel LED indicators (amber and red)
• 2 Optional fully programmable alarm relays (dry contacts)
• Output options: 4-20mA (3-wire) analog, RS-485 modbus

Industry Applications

• Petrochemical plants, Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

GD-70D4S-HCL-06 GD-70D Smart Transmitter, 0-6.00 PPM Hydrogen Chloride, in NEMA 4X Housing, with Strobe, 115 / 220 VAC. by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

TX2-6B021 Tango TX2 Dual Gas Monitor, NH3, HCN, English by Industrial Scientific

• Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2.
• The Tango TX2 is the most accurate two-gas monitor featuring individual sensors that increase alarm accuracy.
• A two-year runtime and replaceable battery simplify gas detection management by eliminating the need for charging infrastructure.

MX6-K6C3R211 MX6 iBrid Multi-Gas Monitor, LEL,NH3,H2,O2,PID,LE,P,E by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

MX6-K1C35211 MX6 iBrid Multi-Gas Monitor, LEL,CO,H2,O2,SO2,LE,P,E by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

ZD22-702-D ZD 22 Fixed Gas Transmitter with Oxygen (O2) MK 435-1, 0 - 2% vol., Display / 4-20 mA by GfG

Superior technology

The ZD 22 Transmitter is specifically designed for long-term monitoring of oxygen concentrations. The integrated amperometric oxygen sensor is based on an electrochemical oxygen pumping cell made of zirconium dioxide. It is characterized by its robustness, a very high life expectancy and its outstanding long-term stability. The integrated thermostatic control of the sensor element achieves accurate measuring results in the entire temperature range, regardless of the operating temperature. It can also be permanently used in environments with high concentrations of CO2 or in dry atmosphere. Special equipment is available to protect the transmitter when used in harsh environments.

Signal processing

The protective casing (IP 54) of the ZD 22 Transmitter contains the complete signal processing electronics and the failsafe routing of the measurement signal for the measuring computer, with extensive self-monitoring. The embedded software linearises the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. In addition, the transmitter can be connected to a gas measurement computer for the option of transmitting service, maintenance, and error messages.

Universal signal transmission

The ZD 22 Transmitter transmits the signals either using an analog (0.2 1mA / 4-20 mA) current interface or a digital (RS485) Modbus interface. This permits the universal use of the trasmitters in combination with GfG gas measurement computers and thus connection to a safety system, so that you and your systems will benefit from the best possible protection.

There are a variety of applications for the ZD 22 in regard to sensors, status LEDs and optional analog or digital interface, "Zero" key to calibrate the zero point, test socket and a potentiometer for the calibration of the sensor.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display

The clear graphic display of the ZD 22 is self explanatory and allows you to read the current status and other important information with ease. The display enables you to navigate effortlessly through the unit s concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm the display changes color from green to red. Two LEDs indicate the status.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

Calibration adapter

In order to perform a calibration, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

• Long service life of the sensors
• Extremely fast response time: t90 < 5 sec.
• Reduced pressure, humidity, or temperature influence
• No damage due to CO₂
• Cost effective single-man adjustment
• Affordable operation costs

TK1114-Z Chloride Drop Count Test Kit, 1 drop = 2 or 10 ppm as Cl by AquaPhoenix

EndPoint ID Drop Count Test Kit, Chloride

1 drop = 2 or 10 ppm as Cl

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Kit includes instructions, reagents, syringe and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

Si-VH3 Hotwire Thermo-Anemometer by Sauermann

The palm-sized Sauermann Si-VH3 hotwire thermo-anemometer easily measures airflow, air velocity & temperature with its hotwire probe with telescopic rod.

• 80 cm (31.5") telescopic rod with double graduation
• Low consumption device
• Backlit LCD screen
• Magnetic backing for easy fixing + Carrying bag

Kit Includes:

• 1 Certificate of conformity
• 1 Quick Start Guide
• 3 alkaline batteries LR03 AAA 1.5 V
• 1 Carrying bag

723-128-20 Eagle 2 Portable Monitor, LEL (CAT) / H2 (TC 0-100%vol) / CH4 (IR %vol) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

Part Number: 221L-367

7000DWS100ILT Explosion-Proof Drop Light with 100' Electric Cable & 12V In-Line Transformer by Western Technology

The 7000 Incandescent Explosion Proof Drop Light is a tough, versatile rain tight and weather proof lighting option. With string light configuration available it is ideal for blasting & Painting, confined spaces, and Hazardous Locations.

Features

• Complies with explosion proof/hazardous location requirements
• Tempered glass globe
• Full swivel hook and heavy duty guard assembly of non-sparking aluminum
• Rain tight and weather proof
• Standard 120 volt operation
• 12 volt available upon request with inline transformer
• Optional factory wired GFCI
• String light configuration available

610-0050-070 Four-Gas Calibration Mix (CO 50 PPM / H2S 10 PPM / CH4 50% LEL (2.5% VOL) / O2 18%, Balance N2, 58 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve

223101 Chlorine Test Kit (Hach): Free & Total Chlorine Color Disc Test Kit by AquaPhoenix

0 - 0.68 mg/L Cl2
0 - 3.4 mg/L Cl2 Cl2
0 - 3.4 mg/L Cl2
1 - 10 mg/L Cl2

This color disc test kit uses powder DPD reagent that reacts with chlorine more quickly than tablet-form DPD, giving more accurate results. Powder DPD also has a considerable advantage over orthotolidine, a hazardous substance sometimes used as a free and total chlorine test reagent. Hach Chlorine Test Kits are manufactured by Hach to ensure compliance with stringent quality control standards. Kit contains 100 tests (50 free, 50 total).

Quickly and accurately measures free and total chlorine levels in the field or in the lab
Simple and fast color disc method

Includes two reagents, color disc, color comparator box, tube, instruction sheet, and carrying case.

Round Safety Yellow Pedestal for 36" Fans

Part Number: CG2JX2.258