All Products

*Please note we can only ship RKI products to customers within the United States

2811-720-008 EC 28 Gas Transmitter with Hydrogen Sulfide (H2S), 0 - 200 ppm, Display / Alarm / Modbus by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

*Please note we can only ship RKI products to customers within the United States

Part Number: E197850LA

Part Number: 34L-50-250

OPT-CAM-NMN OmniPoint Transmitter, Aluminum, M25, Modbus by Honeywell Analytics

The OmniPoint™ transmitter is a comprehensive gas detection solution designed to operate in hazardous locations and support multiple sensors in the detection of toxic, oxygen, and flammable gas hazards.

PROTECTING YOUR WORKERS AND YOUR ENTERPRISE

OmniPoint™ utilizes multiple sensor technologies to meet diverse gas detection challenges in a variety of global industries. Full color, touch key interface and Bluetooth® enabled operation make setup and maintenance intuitive.

Support for up to three sensors makes OmniPoint™ both flexible and scalable to meet your safety requirements.

FEATURES AND BENEFITS

TOUCH KEY USER INTERFACE

• Easy to operate and maintain
• Intuitive configuration and reduced set up time
• No magnet is required
• Monitor up to three sensors from the same flexible transmitter
• Universal electronics module
• Accepts different sensor inputs and simplifies ordering and stocking process

TYPICAL APPLICATIONS INCLUDE

• Power generation
• Hydrogen storage
• Oil and gas refineries
• Chemical and petrochemical plants
• Onshore oil and gas terminals
• Gas transmission (LNG)
• Utilities and wastewater

BLUETOOTH CONNECTIVITY

• Optional BLE app for configuration and maintenance plain text on the full colored display
• Information is presented in an easy to read and understand format with call-to-action instructions
• No need to refer to the manual

GLOBAL APPROVALS

• European, US and Canadian
• Compliant with and certified to ATEX, UL and CSA standards

0563 8165 816 Sound Level Meter by Testo

Compared to testo 815, the larger model has additional features which make it ideal for assessors, workplace measurements and for measuring industrial and environmental noise.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to characteristic A and C
• Maximum and minimum memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• Automatic range switchover
• Backlit display
• Mains unit connection
• BarGraph display
• AC output to connection from recorders and amplifiers
• DC output with 10 mV/dB to connect recorders or dataloggers
• testo 816:
• Time weighting
• Section measurement range
• Frequency weighting
• Current reading
• Automatic range switchover
• Backlit display
• Mains unit connection
• Barograph display
• AC output for connecting recorders and amplifiers
• DC output with 10 mV/dB for connecting recorders or data loggers

Part Number: J197130LM6

18527-34 Thermocouple Mounting Panel, Vertical, Mini Connectors; 4 Circuits by Digi-Sense

Use to creat easy to access direct temperature connection in control rooms, test stands, laboratories, and plants. Use with insert panel temperature connectors to create a complete panel assembly. Available in 2, 4, 5 & 6 circuits for Vertical Face Plates and 6, 8, 10 & 12 circuits for Horizontal Face Plates.

18520-08 Type K Thermocouple Probe Quick DisConnector, Dual with Std-Connector, 6" L, .250 Dia, Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

66-6312-10-W AirLink T3A Sensor/Transmitter with j-box, Chlorine (Cl2), 0-10 ppm with 900 MHz radio by RKI Instruments

The AirLink T3A Series Gas Detector ambient air hazardous gas detector is a versatile assembly that uses an electrochemical, infrared, catalytic bead sensor element to detect a variety of gases. Wired power (12 to 35 VDC) with wireless communication controller. An RKI wireless T3A also has 4-20 mA analog and RS-485 Modbus outputs as standard. Magnetic switches allow for non-intrusive calibration while in the field as well as full system settings and diagnostics.

Features

• Electrochemical, Infrared, catalytic bead sensors
• Wired power (3-Wire), 12 to 35 VDC operating voltage
• Output options: Wireless 900 MHz or 2.4 GHz; 4-20mA (3-wire) analog; RS-485 modbus
• Operating temperature range -40°C to +54°C
• Graphical LCD with LED backlight
• 3 Push-button interface (ADD, MENU, SUB) with 3 corresponding magnetic, non-intrusive switches
• 2 Individually configurable alarms
• 2 Front panel LED indicators (amber and red)
• 2 Optional fully programmable alarm relays (dry contacts)

Industry Applications

• Petrochemical plants, Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

90309-50 Irreversible 1-Point Square Temperature Label, 320F/160C; 50/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

Part Number: CG2C1034

18004-28 Traceable Temperature Bluetooth® Enabled Data Logger Compatible with TraceableGO™ App and TraceableLIVE® Cloud Service; Bullet Probe by Digi-Sense

Track environmental conditions of reagents, clinical samples, vaccines, pharmaceuticals, and food items during transport to any location - Bluetooth loggers monitor shipments while in transit. Compact, durable data loggers fit almost anywhere - even inside a small cooler.

Configure the data loggers from your device using the TraceableGO App to start; stop; change memory mode, unit preference, alarm setting, logging interval; and enable/disable alarm. When all the parameters are set, simply press START on the logger to begin monitoring. Once the shipment is delivered, double press START/STOP on the logger to enable Bluetooth and export the data to your device. You will get an immediate response to see if your contents have been exposed to conditions outside the set parameters.

Measurements are updated every 5 seconds with user-defined reading intervals from 1 minute to 12 hours in 1-minute steps. Logging duration is 227 days (7.5 months) on a 5-minute logging interval. Data loggers store up to 90 alarm events. Data logger displays current reading, Min/Max, and run time or alarm time. 18004-13 only: Display toggles between temperature and humidity measurements every 5 seconds.

You have the option to subscribe to cloud-based TraceableLIVE® service to upload data to cloud - ideal for tracking data from multiple loggers or to comply with regulatory agency requirements. The low-cost TraceableLIVE subscription provides unlimited trip data to be saved on the cloud as well as the ability to send a report to an email.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Connect to your data via smartphone or tablet - any Bluetooth-enabled device - using a downloadable Bluetooth App
• View and download data with free TraceableGO App
• Data loggers store up to 90 alarm events
• Readings and setup parameters easily viewable on large 2" by 1" LCD
• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Monitor air and liquids - sensor and cable may be completely immersed

Includes

Two AAA batteries and NIST-traceable calibration certificate with data.

08610-31 Traceable Clip-On/Key Chain Single-Channel Digital Timer with Calibration by Digi-Sense

Timer counts down in hours or minutes and also functions as a stopwatch. Acts as a handy reminder for meetings or tasks. The 1/3-inch four-digit display is easy to read. Features time-out function in both up and down counting. Weighs only 1/2 ounce. Features a chemical-resistant ABS case and a magnet for attaching to metal.

Products have an individually-numbered Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory

Includes

NIST-traceable calibration certificate with data, magnet, clip, key chain, and battery.