All Products

90550-65 Dampened Back-Con Bimetal Thermometer, 3" Dial, 9" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

2811-707-007 EC 28 Gas Transmitter with Carbon Monoxide (CO), 0 - 1,000 ppm, Display / Modbus by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

WD-35661-09 Conductivity and TDS Standards Pack, 84 µS, 1413 µS, 12.88 mS, and 111.8 mS; 60-mL of each by Oakton

For your convenience, calibration standards, sensor heads, and sensor cartridges are available for your Oakton meters.

• Suitable for use with Oakton 300 series smart meters and meter kits

1874-9307 XPC Chemcassette Tape for Phosgene by Honeywell Analytics

Chemcassette® is the unique trademarked name for a calibration free toxic gas detection method that uses an optical scanning system to detect the presence of gas by a colour change on the specially chemically impregnated paper tape. Chemcassette® technology is highly specific and reacts extremely fast to the presence of parts per billion (ppb) levels of many hazardous gases. Over 200,000 points of gas detection are currently maintained by the Chemcassette® sensing technology at any given time around the World in some of the most critical safety applications possible.

Each Chemcassette® is manufactured to traceable ISO 9000 manufacturing standards by a world class team of highly trained chemists and each batch is calibrated with ultra pure gas that is traceable to nationally accepted standards. This means that the end user does not have to provide calibration facilities themselves thereby saving cost and reducing risks to their own staff.

Efficient high volume manufacturing techniques means that there is always available Chemcassette® in stock that can be shipped anywhere in the World so that our customers are never left without adequate safety cover. Application support with expert gas detection chemists is available by phone and e-mail and is supported with many years of technical application notes and help to diagnose common support issues.

Should there be any concern regarding the performance of an individual Chemcassette®, a free of charge evaluation will be performed to trouble shoot the observed scenario using the award winning quality management system "Customer Discrepancy Report" CDR. Every CDR completed by a customer is guaranteed a full response and the outcome is reported directly back to the end user to ensure a complete resolution process.

Each Chemcassette® is backed with a full warranty and we have over 20 years of experience regarding the quality control of our proven sensing technology.

Additional Features and Benefits:

• Visible proof of a gas release event
• Greater sensitivity (detection down to parts per billion levels)
• Superior selectivity (less cross-interference with other gases)
• Fast response time
• Low false alarm occurrence
• Stability (consistent, repeatable operation)
• No calibration required
• Easy to use
• Available in fixed and portable instrumentation

Features & Benefits

• Visible proof of a gas release event
• Fast response time
• Low false alarm occurrence

Quick Specs

• Greater sensitivity (detection down to parts per billion levels)
• Superior selectivity (less cross-interference with other gases)
• Stability (consistent, repeatable operation)

72-6HMC-C GX-6000 Sample Draw Gas Monitor, LEL/Oxy/NH3(400 ppm)/IR CH4 autoranging, w/Li-ion battery pack/100-240 VAC chgr by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

81-SDM2012-17 SDM-2012 Single Point Calibration Station, Flash Drive, USB Cable, Tubing, CD, 103L 3-Gas Cylinder & ppm CH4, 2 DFRs, without AC Adapter by RKI Instruments

RKI's new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging (Li-Ion Battery Pack)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure GX-2012 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

BZ1-3000030111 Radius BZ1 Area Monitor, O2 (DualSense), No Pump, UL/CSA, LENS Wireless, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

MX6-00200212 MX6 iBrid Multi-Gas Monitor, H2S, Lithium-ion Extended Range Battery, UL/CSA/ATEX/IECEx, Pump, French by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

81-SDM03-03-CO SDM-03 Single Point Calibration Station for 03 Series, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, Demand Flow Regulator & 103L Cylinder 50 ppm CO / N2 by RKI Instruments

Stand Alone Station

Multi Module System

Stand Alone Station Features:

• Stand-alone station (no PC Required)
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Calibration
• Bump Test
• Automatic calibration/bump test option
• Configure 03 Series parameters
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

Length(MM) & Diameter : 175 X Ø3.2
Temperature: -100°C ~ +800°C OR -148°F ~ +1472°F

2901-09-007 IR 29 e B (Increased Safety) Transmitter with Pressure & Humidity Compensation, IP 67, Methane (CH₄), 0 - 100% LEL Range, No Display / Modbus by GfG

Unlike traditional LEL sensors, IR 29 transmitters do not need the presence of oxygen to detect gas. Since they are not affected by sensor poisons they don't require periodic adjustment to make up for lost sensitivity. The IR 29 continuously monitors its functions for proper performance, and can even identify and communicate required service procedures.

Features

• ATEX: II II 2G Ex eb mb ib [ib] IIC T4 Gb
• Patented infrared technology (NDIR)
• Temperature, moisture and pressure compensation
• Maintenance and service-friendly
• 4-20 mA, linear or digital (Modbus interface)

*Please note we can only ship RKI products to customers within the United States

6302-1026 MGS-450 Gas Detector - IP41, 3 x Relays, Analog Output, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.