All Products

2813-737-001 EC 28i Intrinsically Safe Transmitter with Sensor, Ozone (O3), No Display by GfG

Features

• Full-featured smart transmitter for oxygen or a wide range of toxic gas measurement
• Non-intrusive AutoCal calibration adjustment
• Increased safety design to reduce installation cost in potentially hazardous locations
• Intrinsically safe (i) EX-Proof version
• BVS 04 ATEX E 132 X (electrical ex-protection) II 1G EEx ia IIC T4 C 0158
• Available in two configurations: Blind (no display), Display
• Barriers are required
• EX- conduit is not required
• Reduced installation costs

Part Number: H107250PN

Part Number: P19711.62VM3

2619510 Bacteria Tests: Hach Paddle Test Total Aerobic Bacteria / Disinfection Control 10 pk by AquaPhoenix

Hach Paddle Testers allow fast, easy screening of water samples, solid surfaces, and nonviscous liquids where unsanitary conditions may exist. The paddle is a double-sided slide attached to the vial cap. Each side of the slide is used to perform a separate test. The slide has a molded-in grid for easy colony counting without opening the optically clear, leakproof vial.
Paddle Tester, Total Aerobic Bacteria/Disinfection Control (Tryptic Soy Agar/DE Neutralizing Agar), pk/10.

• Save time and simplify lab and field testing with Hach prepared P/A media
• Report Total Coliform values with EPA accepted Presence-Absence bottles and media
• Simplify routine testing with self-contained, easy-to-use Paddle Testers and BART™ products

WD-98767-80 Traceable One-Shot Buffer Solution Kit, Colored, pH 4.005, 7.000, and 10.012; 6 x 100 mL Vials by Oakton

• Convenient, single-use vials eliminate concerns of cross-contamination; each pack contains six polyethylene vials with 100-mL of pH buffer per vial
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days

Oakton® Traceable® One-Shot™ pH Buffer Solutions are supplied with NIST-traceable calibration reports stating accuracy at 25°C to ±0.010 pH, in addition to conversion values for pH/temperature - for the most accurate calibrations!

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

Key Features

• All Oakton® Traceable® pH buffer solutions are NIST-traceable reference materials
• Supplied with calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• Individually packed in foil pouch to prevent UV exposure that may degrade accuracy
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• Convenient kit includes the most common calibration values
• Color-coded buffer for easy identification

Includes

Individual temperature compensation chart and NIST-Traceable calibration certificate with data

*Please note we can only ship RKI products to customers within the United States

3500LEDS60 3500LED System Includes Power Box and 60' cable (spliced) by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

GD-K884X-H2S-30 GD-K88AI Smart Transmitter in NEMA 4X Housing, Hydrogen Sulfide (H2S), 0-30 ppm, IS Type by RKI Instruments

The GD-K88Ai is a diffusion style toxic gas detection transmitter ideally suited to meet a variety of toxic gas detection needs. You can choose from a wide range of electrochemical toxic gas sensors to install in this model. The GD-K88Ai includes easy to read LCD display and push button controls for calibration. When it is used with optional intrinsic safety barriers the GD-K88Ai is safe for use in hazardous locations. The low profile design is only 1.9 inches thick and is easy to install. The hinged housing makes it easy to maintain. This transmitter can be installed with any RKI controller, or integrated to existing PLC or DCS system via 4-20mA output (24VDC two-wire, loop powered).

At the heart of any gas detector is the sensor. The sensors for the GD-K88Ai are aged and tested over a one to three month period, typically resulting in a three to five year life span, providing a lower cost of ownership for your gas detection system. These fast-responding sensors are robust electrochemical type that feature higher sensitivity and selectivity.

With over 75 years of sensor technology experience, RKI has the knowledge and capability to provide the most advanced detection techniques and manufacture the most stable and long lasting sensors in the world. As a result the GD-K88Ai is one of the most stable and long lasting toxic transmitters on the market.

Features

• Diffusion style head
• Digital readout of gas name and concentration
• External control buttons for easy maintenance
• Intrinsically safe design
• Quick response sensors
• Many toxic sensors to choose from
• 3 to 5 year typical sensor life
• Low cost of ownership

Applications

• Semiconductor manufacturing
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Steel
• Automotive
• Refrigeration
• Food Storage
• Power plants

*Please note we can only ship RKI products to customers within the United States

1874-9309 XPC Chemcassette Tape for Ammonia by Honeywell Analytics

Chemcassette® is the unique trademarked name for a calibration free toxic gas detection method that uses an optical scanning system to detect the presence of gas by a colour change on the specially chemically impregnated paper tape. Chemcassette® technology is highly specific and reacts extremely fast to the presence of parts per billion (ppb) levels of many hazardous gases. Over 200,000 points of gas detection are currently maintained by the Chemcassette® sensing technology at any given time around the World in some of the most critical safety applications possible.

Each Chemcassette® is manufactured to traceable ISO 9000 manufacturing standards by a world class team of highly trained chemists and each batch is calibrated with ultra pure gas that is traceable to nationally accepted standards. This means that the end user does not have to provide calibration facilities themselves thereby saving cost and reducing risks to their own staff.

Efficient high volume manufacturing techniques means that there is always available Chemcassette® in stock that can be shipped anywhere in the World so that our customers are never left without adequate safety cover. Application support with expert gas detection chemists is available by phone and e-mail and is supported with many years of technical application notes and help to diagnose common support issues.

Should there be any concern regarding the performance of an individual Chemcassette®, a free of charge evaluation will be performed to trouble shoot the observed scenario using the award winning quality management system "Customer Discrepancy Report" CDR. Every CDR completed by a customer is guaranteed a full response and the outcome is reported directly back to the end user to ensure a complete resolution process.

Each Chemcassette® is backed with a full warranty and we have over 20 years of experience regarding the quality control of our proven sensing technology.

Additional Features and Benefits:

• Visible proof of a gas release event
• Greater sensitivity (detection down to parts per billion levels)
• Superior selectivity (less cross-interference with other gases)
• Fast response time
• Low false alarm occurrence
• Stability (consistent, repeatable operation)
• No calibration required
• Easy to use
• Available in fixed and portable instrumentation

Features & Benefits

• Visible proof of a gas release event
• Fast response time
• Low false alarm occurrence

Quick Specs

• Greater sensitivity (detection down to parts per billion levels)
• Superior selectivity (less cross-interference with other gases)
• Stability (consistent, repeatable operation)

30-0954RK-281 Aspirator Panel for one T2A, T3A, or VOC Pro with flow switch by RKI Instruments

Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away. The filtered and conditioned sample gas is then passed across one or two different detectors. Each detector shares a common calibration and compressed air inlet for aspirated flow. This system is fault tolerant removing the need for expensive downtimes and maintenance. The sample is diluted with air after gas sensor then returned to a common exhaust reducing the danger of potential hazardous gases entering a safe work space.

System integrity is maintained at all times using a flow fail monitoring device which provides an NO contact that activates if the sample line becomes blocked or damaged or if the air supply is removed or interrupted.

The panel can be used with direct-connect (sensors connected to an RKI controller), or with S, S2 Series, and M2A Series transmitters. All transmitters have a 4-20 mA signal for direct connection to the site DCS, PLC or site control system. If needed, RKI instruments can supply a dedicated Gas Detection Control system to provide local alarms, 4-20 mA output with a wide range of dry contacts, making the system very sophisticated and user friendly.

Integral sample filter included to remove water and dirt, automatic drain type.

RS485 Modbus output options available on the M2A transmitter.

Features

• Simple to operate
• Long life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments / samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self draining moisture trap
• Back flush for sample line
• NEMA 4X enclosure options (stainless steel or GRP)

Industry Applications

• Flammable, oxygen, or toxic monitoring
• Wastewater
• Drinking water plants
• Gas turbine monitoring flammable and CO
• Tunnel monitoring
• Landfill borehole analyses
• Printing press exhaust solvent recovery
• Winery CO2 / O2
• Biogas Methane
• Hydrogen Sulfide "H2S" scrubber break through

*Please note we can only ship RKI products to customers within the United States

Part Number: F105340PM2

MX6-K7BH621A MX6 iBrid Multi-Gas Monitor, LEL (Pentane), Cl2, HCN, CO High, NH3, Lithium-ion Extended Runtime battery (UL/CSA/ATEX/IECEX), Aspirated (pump), Polish by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

64131A4 PS200 3-Gas Personal Safety Monitor, (LEL / O2 / H2S) Pumped (infrared LEL sensor) by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

Part Number: F10795PM2

Part Number: J10133VA

0560 7236 720 RTD Thermometer (Ex version) by Testo

Ex-Pt 720 is a highly accurate measuring instrument for fast and exact temperature measurements in areas with danger of explosion up to Zone 0. The large measuring range and the precise four-wire technology make the Ex-Pt 720 the ideal measuring instrument for monitoring measurements.

The instrument is authorized according to European as well as US norms. A broad probe range already covers most applications, on request you can obtain your own customized probe at short notice.

The carrying strap and the simple and easy-to-read large display provide additional security on site.

• Ideally suited to applications in areas with danger of explosion
• Very high accuracy
• Wide selection of probes
• Your customized probe at short notice
• Permits accoring to European and US norms
• Including carrying strap