All Products

ABS Hard Plastic Carrying Case

Sensor, IR, Carbon Dioxide (CO2) 0 - 5% with Scrubber for GX-6000

*Please note we can only ship RKI products to customers within the United States

Nitrogen Dioxide (NO2) 58 Liter Cylinder 25 PPM NO2, 100 PPM CO, 2.5% CH4 / N2

Part Number: Z106725PM1

XNX-AMAV-NNIC1 XNX Universal Transmitter, ATEX M25 AL MPD IR CO2 VV by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

Main Case Gasket, GX-2012 / Gas Tracer

*Please note we can only ship RKI products to customers within the United States

10183277 Altair 5X Multigas Detector by MSA

In the face of potentially dangerous situations, workers need to feel certain that they are protected by the very best safety products on the market. MSA, the Safety Company, provides workers with the security they need to get the job done safely. The Altair 5X Multigas Detector is an industry leader in gas detection and safety features. With high standards of safety and advanced technology to ensure the reliability and longevity of the unit, workers can be certain that the unit represents the most advanced technology in gas detection.

Altair 5X Multigas Detector features

The MSA Altair 5X Multigas Detector can monitor up to 6 gases simultaneously and features a variety of optional MSA infrared sensors. For easy operation, the detector features large glove-friendly buttons, high performance cell sensors, and a durable grip. Users may also want to invest in additional sensors for exotic gases to expand monitoring capabilities.

Exclusive features such as the MotionAlert and Instant Alert provide a sense of security when in potentially dangerous settings. When a user is motionless or disabled, MotionAlert activates and transmits an alert to others with the disabled user s location. The Instant Alert feature allows users to manually transmit an alert to others warning of a potentially hazardous situation.

The Altair 5X Multigas detector features an unparalleled flexibility and versatility designed to meet the unique needs of its many users. From high-resolution color displays or monochromatic LED screens to its 18 different language options, the detectors versatility is unmatched by competitors. Users can also find a wide variety of applications, kits, and accessories to better customize the unit.

Cell Sensor technology

The unit s MSA Cell Sensors are the most advanced cell sensor technology on the market. These sensors have a typical lifespan of more than double the industry average and are engineered using the application-specific integrated circuit design. Utilizing microelectronic technology, the cell sensors breakthrough design enables a faster response time and greater reliability than cell sensors of the past leading to less time and money spent on calibration and bump tests.

Durability

The unit is housed in a durable rubberized polycarbonate grip to ensure safe handling, and passes the 10 foot drop test. Its light weight (1 pound) and compact design ensure easy portability. The Altair 5X Multigas Detector also features a field-proven integral pump providing consistent gas flow without the problems of externally attached components.

Specifications

The Altair 5X Multigas Detector is fully compatible with MSA Link Software and MSA Galaxy Automated Test System. Sensor response and clear times are under 15 seconds for most sensor configurations. The technologically advanced unit also features a bump test of less than 15 seconds, a span calibration time of 60 seconds, a run time of 20 hours, and a lengthy lifespan. The Multigas Detector also comes with a 3 year warranty, beating competitors warranties by a full year.

With an audible alarm of greater than 95 decibels, a visual alarm of 2 LED lights, and a standard vibrating alarm, the unit is well designed to alert users of potential gases. The devices can also effectively store up to 1000 events.

Users can also minimize risk of user errors by participating in MSA s online training and web content. This includes new Altair 5 X Multigas Detector simulation tutorials designed to simulate instrument operation.

2200-016WP GMA 200 Controller, for 16 Measuring Points, Supply Voltage 110 V AC by GfG

The GMA 200-MW is our most flexible and advanced gas detection system controller. The design of the GMA 200-MW ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

Flexible modular design

Each GMA 200-MW module can control up to 16 individual gas transmitters (sensors). The self-contained, IP-65 wall-mounted housing facilitates cost-effective and space-saving installation. GMA 200-MW systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touch-screen computer interface.

Easy to configure

Easy-to-use, menu driven GMA 200-MW software allows configuration of sensor type, gas type, measuring point designations, units of measurement, calibration curves, and function of the comprehensive and fully programmable relays. Up to three individual or specified alarm thresholds can be programmed for each measuring point. The GMA 200-MW continuously evaluates the analog input signals of the connected detectors.

Integrated relays

GMA 200-MW systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Relay modules

GMA 200-RW relay modules are housed in easy to install IP-65 wall mounted enclosures. Each relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MW system. Digital connection with the GMA 200-MW controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs.

Remote terminal displays

Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MW system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart-phone to display or access system information.

GMA 200 power options

GMA 200-MW power options include traditional voltage inputs (2 x 24 V DC, 20-30 V), as well as operation via a redundant, uninterruptible power supply (UPS), ensuring continued operation of the gas warning system even during a power outage.

Integral alarms

The GMA 200-MW includes built-in bright LED strobe light and loud audible alarms.

LED indicator lights

The status of the GMA 200-MW system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Datalogging standard

Measured values, mean values, alarm events and faults are permanently stored on a microSD memory card.

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Five buttons enable operation at the GMA 200-MW controller. The main functions of the keyboard are the acknowledgement of alarms and the menu-driven operation. Information on the status of the controller, detector and the relays can be retrieved in the operating menu.

Operation via keypad

Operation of the GMA 200-MW is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Configuration

A built-in USB port in the GMA 200-MW is used for connection to the configuration software. GMA 200-MW systems connected through a Fieldbus gateway can be remotely connected with a GfG factory service center for configuration, diagnostic or service evaluation.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Additional modules available in IP-65 wall-mounting housings

• External relay module: GMA 200-RW
• Independent power supply: GMA 200-UPS
• Continuous, motorized pump sampling unit: GMA 200-ASV
• Fieldbus gateway: GMA 200-GW

Features

• Advanced and flexible controller for combustible, O₂ and toxic gas
• IP-65 wall-mounting housing, with integral audible and LED alarms
• Flexible, reliable and economic
• Up to 16 transmitters per GMA 200-MW controller in any combination
• Freely programmable relays
• Clearly structured, easy-to-use push-button interface
• Backlit graphic LCD changes color to indicate alarm
• Connect to other measurement devices with 4-20 mA output

34 Liter 100 PPM Carbon Monoxide, 25% LEL Pentane, 2.5% Carbon Dioxide, 19.0% Oxygen Calibration Gas, Nitrogen

Part Number: 34L-363

ODO9000 Titanium Body Optical DO Sensor, 10m by Sensorex

The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there's no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.

Durable and Reliable

• SS316 body option for fresh water
• Titanium body option for salt water
• Optical technology allows for up to 2 years of use without the need for maintenance

Save Time On Set-up

• No calibration required
• Plug and play

Digital Communication

• Open protocol Modbus RS485 Signal

Eagle 2 Calibration Kit, 34L Cylinder 50 ppm CO/50% LEL CH4/12% O2/N2, 34L Cylinder 10 ppm Isobutylene in Air, Dem Flow Reg, Case & Tubing

*Please note we can only ship RKI products to customers within the United States

Nitrogen Dioxide 5 ppm, 58L

Hydrogen Sulfide (H2S) 58 Liter Cylinder 15 PPM H2S, 250 PPM CO, 2.5% CH4 (50% LEL), 18% O2 / N2

Part Number: Z105315PM3

LABEL, CALIBRATION RECORD

Replacement thermocouple for probe 0600 9542 (325)

Cylinder, Propane, 10% LEL in Air, 103L

*Please note we can only ship RKI products to customers within the United States

MCXL-XUHM-B-EU GasAlertMicroClip XL Detector, Combustible (% LEL, Unfiltered), Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Black Housing, EU version (Europe) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL-XUHM-B-EU

MW306 MAX Waterproof EC/TDS/NaCl/Temp Logging Portable Meter by Milwaukee

The Milwaukee MW306 4-in-1 PRO EC/TDS/NaCl/Temp. Logging Portable Meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and IP67 Waterproof rating. Accurate to ± 1% EC/TDS & Salinity with automatic or manual temperature compensation, and built in GLP key. Ideal for use by hydroponics, horticulture, labs, food processing, water treatment and many other applications with challenging EC/TDS/NaCL/Temp. measurement needs.

WHAT PEOPLE ARE SAYING

• Amazingly accurate, the best meter I have used so far.
• Very satisfied, very accurate, rugged device that calibrates easily.
• Rarely needs to be calibrated and gives perfect readings every time.
• Killer tool, good value.
• Logging data is easy-to-use and download.
• Love the GLP function.
• Easey to Clean.

SUMMARY

The Milwaukee MW306 4-in-1 PRO EC/TDS/NaCl/Temp Portable Logging Meter is preferred by people testing samples in various applications. The easy-to-use logging feature allows data collection without messy notes and errors. From aquaculture and coral to hydroponic growers and farmers the MW306 is your meter for fast, accurate readings.

The Milwaukee PRO EC/TDS/NaCl/Temp. meter offers:

ACCURACY

People choose the MW306 4-in-1 PRO EC/TDS/NaCl/Temp Portable Logging Meter to improve the accuracy of their testing program. With easy one point calibration and six standard buffer calibrations choices, the meter can be quickly calibrated to a high accuracy compared to other meters and it provides highly accurate temperature compensation readings. The MW306 meter is accurate to ± 1% of reading for EC/TDS and NaCL.

The meter comes with MA815D/1 conductivity probe with a built in temperature sensor allowing the meter to automatically adjust the EC/TD/NaCl reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.5°C (+/-0.9°F)

TOUGHNESS

The rugged meter is built to take knocks and is IP67 Waterproof rated.

LOW MAINTENACE

The MW306 PRO EC/TDS/NaCl/Temp Portable Logging Meter comes with the Milwaukee amplified MA815D/1 combination EC/Temp sensor. This is Milwaukee's top selling lab grade EC probe for a reason. Designed to be both low maintenance and able to withstand more challenging samples. The MA815D/1 is ideal for use in hydroponics, horticulture, aquaculture, labs, water treatment/conditioning and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to 1% Of reading for EC/TDS/NaCl |+/- 0.5°C (+/-0.9°F).
• Extended ranges for EC/TDS/NaCl.
• Lightweight and portable, IP67 rated.
• Simple easy-to-use logging and USB download functions ,manual or on demand up to 1,000 logs.
• GLP data, date and time.
• Different logging methods, manual log-on-demand or manual log-on-stability.
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
• Single cell factor calibration for EC/TDS automatic simple 1 point calibration.
• Rugged low maintenance, high performance, easy-to-clean EC/TDS/NaCL/Temp probe.
• Built in temperature sensor.
• 3 x 1.5V Alkaline AA batteries with 200 hours battery life (included).
• Built in Battery Error Prevention System (BEPS).
• Auto-Ranging Feature for EC/TDS.
• Auto-shut off feature to preserve battery energy.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• 3 feet probe cables for extra flexibility when testing.

CARE, USE AND CLEANING

EC meters usually start performing poorly because of problems with the sediment on the conductivity probe's rings. The dirty rings on the probe can change impedance. Cleaning the rings is simple. Slide the plastic shield off and clean with DI water and soft cloth to keep your readings accurate.

STORAGE

When not in use, store the meter and probe in a safe area to avoid damage. The EC probe is stored dry. Remove batteries if not in use for a prolonged period to prevent battery compartment corrosion.

CALIBRATION

The MW306 is easy 1 point calibration for ease-of-use and high accuracy with built in (ATC) feature. Calibrating regularly is best to keep your PRO MW306 4-in-1 meter accurate for all your readings.

BM25 LEL ISOBUTAN IR SENSOR

Vehicle Adapter with function LED

Carbon Monoxide (CO) 221 Liter Cylinder 10 PPM / Air

Part Number: M101610PA

K-Type Thermocouple Immersion Probe

Length(MM) & Diameter : 225 X Ø4.8
Temperature: -100°C ~ +900°C OR -148°F ~ +1652°F

BW Technologies Single Gas PH3 (5 ppm)

Part Number: CG2P558

AS1010-Q Ammonia Standard Solution as N, 10 mg/L (ppm), 1L by AquaPhoenix

Specifications

• Packaging Type: Glass
• Size: 1.00 L

103 Liter Refrigerant R134A Calibration Gas, 500 PPM, Nitrogen

Part Number: 103L-70-500