All Products

72-6KPX-C GX-6000 One Sensor Sample Draw Gas Monitor, Oxy/CL2(0-10.0 ppm), with Li-ion batt pack/100-240 VAC charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

RAD-60 Nylon Carrying Case by SE International

Designed exclusively for use with the Rados brand 5X & 6X Series electronic dosimeters helps to realize substantial savings on clip replacement and dosimeter repairs. Experience less down time for you in-house inventory all with a unique design the allows for secure use on a lanyard, belt or other device. Carrying cases are also equipped with belt clip or belt loop.

Part Number: 66L-467

*Please note we can only ship RKI products to customers within the United States

PH8500-BS Portable Blade Spear pH Meter for Meat with Data Logger by Apera

The Apera Instruments PH8500-BS Portable Meat pH Meter is a food grade pH meter/tester with specially and professionally designed food grade electrode, and it is an outstanding combination of the advanced digital processing technology, software design, and electrochemical sensor technology, specially designed for the pH measurement of meat, meat products, fish, or beef. The LabSen® 763 Blade Spear pH Electrode adopts food-grade stainless steel sheath, a solid polymer electrolyte, and a long-life reference system, making the probe hard to be contaminated and maintenance-free.

The Apera Instruments PH8500-BS Portable Meat pH Meter, a pH meter for food and meat products, has a ±0.01 pH accuracy in a range of -2.00-19.99 pH., with 0-100°C Automatic Temperature Compensation (ATC), Auto Calibration with auto-recognition of up to 12 kinds of buffer solutions, and supports stable reading/auto-hold display mode. The meter's digital filter technology improves response time and accuracy.

Intelligent Functions: Smart Self Diagnosis of out-of-range measurement, incorrect calibration, and electrode invalidation warning. Other functions include calibration reminders, calibration date checking, easy parameter setting.

Data Processing: GLP standard data management, 500 data sets of storage, manual/auto timing storage, USB charging, and data output, data protection in case of a power outage.

Reliable Structure Design: White backlit large LCD, the foldable stand allows use as a benchtop meter, soft silicone case gives you a good grip, connector protection cap, IP57 waterproof, battery and/or USB power supply. The meter is CE certified and comes with a 2-year warranty (6-month for the probe).

• Equipped with LabSen® 763 Blade pH Electrode, designed for professional pH tests for meat
• Accurate Measurement: Accuracy: ±0.01 pH, Auto. temperature compensation, Auto. Calibration, advanced digital processing technology, supports stable reading/auto-hold display mode
• Intelligent Functions: Self-Diagnosis of out-of-range value and electrode invalidation, calibration reminders, calibration date checking, easy parameter setting
• Data Processing: GLP standard data management, 500 data sets of storage, manual/auto timing storage, USB charging and data output, data protection in case of a power outage
• Structure Design: White backlit large LCD, the foldable stand allows use as a benchtop, soft silicone case gives you a nice grip, IP57 waterproof, battery and/or USB power supply

18520-30 Type T Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 18" L, .250 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

T4-ZOCA-H2-BR T4 Personal Gas Monitor, 3 Gas - O2, CO (H2 resistant), CH4 % LEL, Alternate Alarm Levels / Certifications by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

Part Number: 10L-77-1000

GHS1033 SDS Station with Binder (18" x 24"), English/Spanish by GHS Safety

GHS Safety Data Sheet Information Station provides a central place to easily access all S.D.S. sheets for your plant or office. The Station comes with a sturdy metal pocket designed to hold the included binder. The mounting board is constructed of 1/4" plastic with 4 mounting holes to provide easy mounting and years of durability. Each station comes with a standard 3 ring SDS printed binder with A Z alphabetical dividers to sort all of your Safety Data Sheets.

The mounting board is constructed of 1/4" plastic with 4 mounting holes to provide easy installation and years of durability. 18" x 24"

English / Spanish

90308-70 Irreversible 4-Point Horizontal Temperature Label, 340-370F/171-188C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

2801-34-001 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-100% LEL (MK 208-1), Methylisobutylketone (C6H12O), No Display by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

0560 8314 830-T4 IR Thermometer, 30:1 optics & dual laser by Testo

This universal infrared thermometer is designed to perform fast and accurate surface temperature measurements in the HVAC area and industry. At a distance of 1 m the point diameter is only 3.6 cm. From a secure distance even smaller, difficult to access or dangerous targets can be measured without any problems. The new high resolution processor enables measurement results of unbelievable accuracy. And due to the min./max. function you can define your temperature limit values according to your needs. To control the limits with the help of an audible and visual alarm has never been easier.

• 30:1 optics for measuring temperature at a distance, even on small objects
• 2-point laser for spot sighting
• Display of current value and Hold value
• Emissivity determination with external temperature probe
• Audible and optical alarm when limit values are exceeded
• Fast measurement value recording at two measurements per second
• Display illumination
• °C contact measurement with connectable TC probe
• Input of upper and lower limit value

Part Number: 4903-600

*Please note we can only ship RKI products to customers within the United States

Part Number: 221L-17A-25

400563 4251 425 CFM Hot-Wire Anemometer Kit by Testo

The compact testo 425 anemometer with permanently attached thermal flow probe (probe head Ø 7.5 mm) incl. telescopic handle. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is also possible to switch to the current temperature reading. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature reading. Min/max values can also be shown in the display. The Hold function makes it possible to freeze current readings in the display.

Kits includes:

• 0560 4251 - 425 CFM Hot-Wire Anemometer
• 0516 0210 - Soft carrying case - small

• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• TopSafe, the indestructible protective case (optional)
• TopSafe, instrument protection against dirt and knocks

Part Number: GAMICBAT0203