All Products

2811-4041-003M EC 28 Gas Transmitter with MODBUS, Ammonia (NH3), 0-100 ppm for Flash Freezers, Display / Alarm by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

Part Number: 17L-50-250

*Please note we can only ship RKI products to customers within the United States

AI1107 3M KCl Storage Solution 4 oz. by Apera

This storage solution is for conditioning and extending the service life of regular pH and ORP electrodes/testers/sensors. pH/ORP electrodes that are stored dry will lose their sensitivity and accuracy temporarily. They can be restored by soaking in the KCL solution. Keeping pH/ORP electrodes stored in the storage solution when not in use is a recommended practice. The storage solution works well for Apera Instruments regular pH and ORP meters and electrodes e.g. PH20, PH60, 201T-F, 301PT-C.

Expiration date specified on the bottle.

Content: 3M KCL solution

Volume: 4oz.

6759 Umbrella, 59" X 59", Blackout Shade Material and V-Cup Mount by Pelsue

The Pelsue Floating Umbrella is designed as a portable shelter for situations where traditional work umbrellas aren't practical. This new umbrella design requires only a smooth clean surface for setup, making it perfect for tight spaces such as those found around Charles cabinets (like those commonly housing telecommunications equipment and other utilities). Thanks to the design of the suction cups it's also possible to attach the umbrella to surfaces that aren't perfectly flat, such as the side of work vehicles and trucks.If you are looking for shade or protection from inclement weather the Floating Umbrella has you covered. Coverage on the with the Floating Umbrella is about 50% greater than the Floating Tent, making it ideal for providing shade. Please note that the umbrella support structure is the same as that sold with the floating tent. You can easily switch out the top you are using should weather conditions change. The suction cups used here are pump operated for a strong hold, our current record is 6 hours on a smooth clean surface.

If you are worried about protection from more severe weather, consider Pelsue's Floating Tent. With 60' roll down sides it's capable of providing 360 degrees of protection.

Why suction cups and not magnets?

Suction cups let the umbrella work on almost any smooth surface, magnets require that the surface is magnetic (generally made of metal). Even with powerful magnets such as those made from neodymium, the surface may not be strongly attract the magnet. Magnets that aren't sufficiently powerful may also slide on the surface increasing the risk of injury. Powerful magnets are also dangerous in their own right. They may crush or pinch the unprepared if they are attracted to a surface. Suction cups are less prone to sliding and spinning, and can't practically cause crushing injuries.

Floating Tent Features

• Adjustable support with three joints to insure versatility in any location. Includes two hinge joints (base can be rotated in two axes), and a ball joint at the top.
• Water/Fire/UV resistant fabric for all portions of the tent.
• Non-Rusting and Rust resistant components for support structure.
• Dual Pump operated suction cups, with hold indicator on pump.
• Carrying case.

6202-5144 IAM-100 Gas Detector, Remote Sensor/Faceplate, R22 0-10,000ppm, 220 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

65-2480RK-53 Multi-sensor, Direct Connection for LEL (Catalytic)/H2S with J-Box, CSA Version by RKI Instruments

The RKI direct connect series gas sensors are highly reliable and very cost effective for the detection of common gas hazards. The direct connect series are available for LEL, Oxygen, H2S, and CO for a variety of RKI's controllers. All sensors are explosion-proof with flame arrestors, and approved for use in hazardous locations.

The tri-sensor head can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments.

The unique tri-sensor design integrates 3 sensors into one explosion proof housing. This results in significant savings with installation and wiring cost versus traditional single sensor enclosures. Only one conduit needs to be run to the sensors.

The tri-sensor head is designed to exclusively interface with the RKI Beacon 410 controller. This 3 sensor head, used with the Beacon 410, is especially well suited for wastewater applications.

Also available in a two or four sensor version, with sensors for LEL, Oxygen, H2S, and CO available.

IR (infrared) sensor versions available for LEL detection.

Features:

• 3 Sensors, 1 explosion proof housing
• Infrared sensors available for combustible gases
• Interfaces with Beacon 410 controller
• Available for LEL, O2, H2S and CO
• Water repellent patented sensor coating
• Long life sensors (2 + years typical)
• Also available with 2 or 4 sensors

Applications:

• Wet Wells
• Dry Wells
• Bar Screen
• Lift Station
• Digesters
• Thickeners
• Primary Clarifiers
• Pump Stations
• Confined Spaces

*Please note we can only ship RKI products to customers within the United States

H-10-100-40 Ammonia Colorimetric Gas Detection Tube, 1 - 15% (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

72-FP-A-B GX-Force Portable Gas Monitor, Oxy, AC adapter, USB cable, belt clip, rubber nozzle by RKI Instruments

With the GX-Force, you have multiple tools in one instrument. Having 2 operating modes, the GX-Force can be used for confined space, safety monitoring in its Normal Operating mode. A Leak Check mode is the solution for all leak investigations.

The GX-Force is RKI's smallest personal 1-4 gas monitor with a strong built-in sample pump capable of a 100' sampling range. Weighing only 9.8 ounces, the GX-Force can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). Built around high-quality micro-sensor technology, which are compatible with the GX-3R, GX-3R Pro, 04 Series, and Gaswatch 3 instruments.

The GX-Force's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or non-latching. Controlled by a microprocessor, the GX-Force continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-Force operates 30 hours on a Li-ion battery.

Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. Calibration can be done individually or in a group.

Features

• 2 Operating modes: Normal and Leak Check
• Internal sample pump with 100' sample range
• 30 hours of operation (Lithium-ion battery)
• Easy to grip lightweight design: 2.5" W x 6.81" H x 1.85" D, 9.87 ounces
• Water and dust resistant design, IP67
• Field replaceable sensors & filters
• Impact resistant body
• Intrinsically safe
• Large LCD Auto-backlit display
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

Part Number: H10495000PM1

3614-043 D-ReX PoI Gas Detector with 5 relays, Diborane (B2H6) MK484-10, 0 - 1 ppm by GfG

The D-ReX PoI's external sensor can be mounted in a location up to 4,000 feet / 1,200 meters away from the device and monitor toxic, combustible and corrosive gases as well as the oxygen concentration from there.

The remote sensor can be mounted directly onto pipe systems, gas cabinets and other hard-to-reach locations so that the gas detector itself can be mounted at eye level for easy access. This facilitates maintenance, inspections and operation.

With the optional saddle, it can also be used

Available Accessory:

• Mounting saddle
• Viton® (FKM) sealing for all saddle types
• M12 remote sensor cable, various sizes (3 to 100 ft / 1 to 30 m)
• Calibration cap for PoI
• Mounting brackets
• DIN rail

Features:

• 5x internal relays (form C, configurable)
• Smart sensors for more than 60 gases
• Hot-swappable smart sensor cartridge
• Tool-free maintenance
• Power-over-Ethernet (PoE) communication
• Web server for browser access
• Password-protected menu
• Interface: Analog outlet: 4 20 mA output; Digital: RS-485 (Modbus/RTU); 10/100 Mbit Ethernet (Modbus/TCP)
• Bright status and alarm LEDs
• Data logger to review sensor and alarm history
• Marked as FCC, CE, IC and UKCA

72-5483RK Eagle Portable Monitor for LEL & PPM/CO/O3/NO2 (No Probe) by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

18100060-1B Gasbadge Pro Single Gas Monitor, CO, INMETRO by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

SCT-108.001.05 SCT TDS PEN-1 Handheld TDS Meter with ATC by ScichemTech

Includes:

• Handheld TDS Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy TDS measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 10 ppm resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With Automatic Temperature Compensation (ATC).
• Battery operated.

2811-4501-003M EC 28 Gas Transmitter with MODBUS, Ammonia (NH3), 0-100 ppm, Display / Alarm by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

PC400S Portable pH/Conductivity Meter with GLP Data Management and USB Output by Apera

The Apera Instruments PC400S provides reliable pH and EC measurements with various intelligent functions and a durable structure. Equipped with Apera's high quality 3-in-1 pH electrode and BPB (Brush-Resistant Platinum Black) conductivity sensor, the meter tests pH, EC, TDS, and temperature in a quick and accurate manner.

Intelligent Functions: Quick & Easy 1 to 5 Points Auto Calibration. The Smart Self-Diagnosis helps you conduct proper calibrations and determine the condition of your probes. GLP Data management (1000 groups of data storage), USB data output and power supply. Timing measuring/data logging mode and Smart calibration reminder function available. Purified water and ammonia-added purified water measuring modes available. The large clear LCD displays pH/EC and temperature simultaneously along with icons of stable readings and finished calibrations.

Reliable Structure: IP57 Waterproof and Dustproof, ideal for use in harsh environments. It comes with a complete test kit including a meter, a pH electrode, a conductivity electrode, a USB cable, and 6 bottles of calibration solutions all in a rugged carrying case. Powered by AA Batteries. Two-Year warranty for the meter. CE certified.

• The high quality 3-in-1 pH Combination electrode and BPB Conductivity Electrode ensure Quick & Accurate pH and EC measurements
• IP57 Waterproof and Dustproof, ideal for use in harsh environments
• The large backlit LCD displays EC/pH and temperature simultaneously along with icons of stable readings and finished calibrations.
• GLP Data management (1000 groups of data storage), USB data output and power supply
• Quick and Easy 1 to 5 points auto calibration with calibration reminder function (premixed standard solutions included)

6130-2105 MGD-100 Gas Detection System, R407a: 0 - 1,000 ppm, 2 Sensors, 2 Alarms, IP66 Housing, 110 VAC by Bacharach

Bacharach's MGD-100 Series is a robust and scalable gas detection system used for reliable real-time monitoring of refrigerant, combustible, and toxic gases. It's a stand-alone system that alarms when pre-set thresholds are exceeded. The MGD-100's alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators.

MGD-100 Systems can be configured from single-sensor, one-alarm level systems to larger scale systems consisting of 6 sensors with 2 alarm levels. This flexibility allows the platform to be used for both small and large systems.

Ideal for Chiller Rooms, Supermarkets, Brewing and Bottling Facilities, Industrial Refrigeration, Arenas, Food Storage and Processing Facilities.

Features & Benefits:

• Stand-alone, out-of-the-box solution with quick and easy installation - the most cost-effective system available.
• Fast-response sensors detect leaks quickly, which minimize refrigerant gas usage and environmental impact.
• Infrared (NDIR) CO2 detection
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustibles & VOCs
• Robust design allows units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount.
• Select from 1, 2, 4 or 6 remote sensors and 1 or 2 pre-set alarm levels, which can be connected to BMS systems.

*Please note we can only ship RKI products to customers within the United States