All Products

72-2104A-12 410A Four Channel Wall Mount Controller, Standard Basic Unit for 12 VDC Operation by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

• Simultaneously control up to 4 gas monitoring channels
• OLED display of all 4 channels
• LEL / O2 / CO2 / toxic direct connect sensors
• Accepts any 4-20 mA transmitter, 2 or 3 wire
• Up to 3 programmable alarm levels per channel
• Up to 3 configurable alarm relays per channel
• 4-20 mA analog & Modbus digital output standard
• 115 / 220 VAC or 24 VDC operation
• Audible alarm with silence feature
• RFI / EMI Resistant
• Alarm reset switch
• Built in trouble alarm with relay
• Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Parking garages
• Manufacturing facilities
• Steel

*Please note we can only ship RKI products to customers within the United States

T4-HOZA T4 Personal Gas Monitor, 3 Gas - H2S, O2, CH4 % LEL by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

PM4ZCHX001SE Be Safe 3-Gas Portable Gas Detector Kit, Device configured with O2, CO, H2S, Designed for ATEX Zone 0, Kit includes Calibration cap, Quick Guide, Test report, Declaration of conformity ATEX and IECEx by Seitron Americas

Be Safe SG is the new portable single gas detector, designed to be compact, robust and easy to use. Configurable for 1 gas including O2, CO, H2S or SO2, it can be used in hazardous areas with explosion risk.

Portable Gas Detector

• 24 months of continuous operation
• Reliable detection of low concentrations of toxic and flammable gases
• Durable and easy to operate
• Integrated alligator clip
• Intrinsically safe
• Self-test function
• Event log storage
• Approved for ATEX Zone 0

Be Safe SG Kit includes:

• Portable gas detector
• Calibration cap
• Quick Guide
• Test report
• Declaration of conformity ATEX and IECEx

• INCREASED SAFETY: Built-in audible, vibration and visual alarms for an immediate danger warning.
• SOLID AND RELIABLE: The rugged and solid housing ensures precise and safe detection in all environments.
• CONTINUOUS PROTECTION: Designed to guarantee continuous operation for 24 months without any need to replace sensors or battery.
• EASY TO USE: Designed from the ground up to ensure the greatest ease of use and intuitiveness possible.

Part Number: C2HOSE415

PH60-PW pH Tester Kit for Pure Water with LabSen 805 ATC pH Electrode by Apera

Discover the next level of precision, reliability, and portability with our top-rated professional PH60 tester, now paired with the Swiss LabSen 805 pH/temp. electrode. This powerful combination revolutionizes pH measurement, especially in challenging applications like distilled/drinking/RO/surface/boiler/storm/well/deionized water, etc. The electrode also works well in general water solutions. Elevate your pH measurement experience with our comprehensive test kit that leaves no detail unaddressed. This all-inclusive kit not only includes ready-to-use calibration buffer solutions (4.00/7.00/10.01) and soaking solution but also features the Apera CalPod Solution Organizer for optimizing your calibration process. All components are conveniently housed in a rugged carrying case, ensuring that you can effortlessly perform reliable pH measurements and calibrations wherever you go.

• PORTABILITY + RELIABILITY — The top-rated pH tester is now paired with the Swiss LabSen 805 pH electrode, allowing you to effortlessly take lab-grade pH measurement even in pure water such as istilled/drinking/RO/surface/boiler/storm/well/deionized water wherever you go.
• SWISS SENSOR TECH — Crafted with Swiss sensor technology and premium materials, the LabSen 805 pH electrode's triple ceramic junctions and special L membrane eliminate the common issue of jumping reading in pure water testing, ensuring you to quickly get stable results.
• ROBUST REFERENCE SYSTEM — LabSen 805 employs a Long-Life Reference System, outperforming ordinary Ag/AgCl systems by maintaining reference potential stability over time, which significantly extends the electrode's service life.
• INTELLIGENT METER BODY — The water-resistant meter body is featured with intelligent functions such as Automatic Calibration, Auto. Temperature Compensation, Reading Alarm Settings, Automatic Reading Lock, and more to meet your precision needs.
• COMPLETE TEST KIT — not only includes ready-to-use calibration buffer and soaking solutions, but also features the Apera CalPod Solution Organizer for optimizing your calibration process.

0560 6081 608-H1 Large Display Temperature & RH Meter with Min/Max Display by Testo

The affordable standard testo 608-H1 hygrometer measures humidity, temperature and dewpoint non-stop. The efficient testo 608-H2 alarm hygrometer with LED alarm function for accurate signals when limits are exceeded.

• With dew point calculation td and max/min display
• Humidity sensor is not affected by condensation
• Battery monitoring

72-5101RKT Eagle Portable Monitor for LEL/PPM, with Teflon Hose, for Heavy Hydrocarbons (Specify Calibration) by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

WD-35801-79 Double-junction, Glass-body, Refillable pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature

SCT-108.003.01 SCT BEN-pH-01 pH Meter with RS232 by ScichemTech

SCT basic benchtop pH/ORP/Temp meter which is suitable for general pH measurement in laboratory consistent with the basic requirements.

Includes:

• Plastic pH combination electrode
• Standard solution pH 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• Operation manual

Features:

• SCT benchtop meter is designed to measure pH, ORP, temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, data storage/ recall, and memory max. and min. value etc.
• 1~3 point automatic calibration and it can automatically display the percentage of slope after finishing calibration
• Equipped with manual temperature compensation
• Option to switch between °C/°F.
• SCT benchtop meter meets ISO9001:2008 & CE standards

72-FA-B-A10 GX-Force Portable 4 Gas Monitor, LEL/Oxy/CO/H2S, 12VDC car plug adapter, USB cable, belt clip, rubber nozzle, 10ft hose/probe by RKI Instruments

With the GX-Force, you have multiple tools in one instrument. Having 2 operating modes, the GX-Force can be used for confined space, safety monitoring in its Normal Operating mode. A Leak Check mode is the solution for all leak investigations.

The GX-Force is RKI's smallest personal 1-4 gas monitor with a strong built-in sample pump capable of a 100' sampling range. Weighing only 9.8 ounces, the GX-Force can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, and Hydrogen Sulfide). Built around high-quality micro-sensor technology, which are compatible with the GX-3R, GX-3R Pro, 04 Series, and Gaswatch 3 instruments.

The GX-Force's large LCD display shows all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or non-latching. Controlled by a microprocessor, the GX-Force continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors. The GX-Force operates 30 hours on a Li-ion battery.

Calibration and bump test intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired. Calibrations can be performed automatically or individually in single calibration mode. Calibration can be done individually or in a group.

Features

• 2 Operating modes: Normal and Leak Check
• Internal sample pump with 100' sample range
• 30 hours of operation (Lithium-ion battery)
• Easy to grip lightweight design: 2.5" W x 6.81" H x 1.85" D, 9.87 ounces
• Water and dust resistant design, IP67
• Field replaceable sensors & filters
• Impact resistant body
• Intrinsically safe
• Large LCD Auto-backlit display
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

6202-5145 IAM-100 Gas Detector, Remote Sensor/Faceplate, R507a 0-10,000ppm, 220 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

1904C-1000 VC4 Toxic Gas Monitor, 110VAC by Honeywell Analytics

Honeywell VC4 is based on colorimetric technology with more advanced and friendly designs. It represents the latest in interference free, low maintenance, low cost of ownership solution for the semiconductor, pharmaceutical and chemical industries.

FEATURES

• Authentic Chemcassette® technology for enhance standard of accuracy: Chemcassette® technology, pioneered by Honeywell, delivers low-level gas detection you can count on. The system detects highly toxic gases quickly and definitively – down to parts per billion (ppb)-as evidenced by a clear, easy-toview stain on chemically treated tape.
• 4-point gas detection system: VC4 continuous monitoring on 4 Points, more economical and flexible.
• Shorter lead time, faster and more convenient technical response and spare parts support: VC4 is designed and manufactured in China, allowing for more stable, fast, and convenient technical support.
• Faster gas leak response time: The sampling flow rate at each detection point improves to 2.8LPM for 120M sample line,improving the gas leak response time and can meet the latest Taiwan EPA requirements.

MORE FEATURES &NEW DESIGNS:

• 120 M sample line
• Easy to use and maintenance (Linux, touch screen)
• Advanced communication outputs
• Built-in Webserver/Webpages, easily remote view the system
• New Carrier for Chemcassette®: can use 6 months Chemcassette® tape
• More stable performance: Updated to Close loop optics block (CLO); Updated with the step motor and encoder for tape advance

XSCPRF3E-H Advantage MegaTron XS Tower Controller, Conductivity, ORP, pH, 3 Timers, Flow Switch with Internet - CAT5 & WIFI by Quantrol

Features

• Cycles control with the make-up conductivity
• Display mA readings in the System RUN screen
• Auxiliary flowmeter inputs can activate a pulse timer
• ORP has two set points with the second linked to a 28-day timer for shocking to a higher ORP value
• USB downloaded history can be uploaded to WebAdvantage
• Web communications to WebAdvantage via the customer's internal network or external cell router and data service
• Four or eight mA inputs are available for specialty sensors, including PTSA trace, pressure, drum level, free chlorine and many other sensors
• Force a relay into a single event defined time to catch up on chemical feed
• Supports Bacnet, Modbus or Lonworks building management communications
• Receive alarm from an auxiliary flowmeter if bleed is not occurring correctly
• Biocide timers can remember to feed one event when flow comes back on if one or more feed events are missed during no flow conditions
• Second conductivity set point for no inhibitor conditions is available
• Tower conductivity, make-up conductivity, pH and ORP in one unit
• Pulse timers can have two different water meter inputs added together for the accumulate activation setting
• Chemical feed can be interrupted during bleed or other events
• Five miscellaneous digital inputs from drum level wands
• Advanced relay logic for special controlling schemes
• Pulse timer initiated boiler conductivity sampling
• Single or dual boiler conductivity control

18100060-1S Gasbadge Pro Single Gas Monitor, Single-Gas Monitor, CO, U.S. standard settings by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

Part Number: CGTR341

94052 Dew Heater Ring - 9.25" by Celestron

The Celestron Dew Heater Ring is the ideal dew prevention solution for your Celestron telescope. This must-have accessory will improve your observing or imaging nights year-round. The Dew Heater Ring permanently mounts to your 9.25" Celestron Schmidt-Cassegrain and EdgeHD optical tube, replacing your retaining ring, so you'll never be caught without it. The installation process is quick and easy (follow the manual for instructions).

How it works

The Dew Heater Ring replaces the plastic retaining ring on your Schmidt corrector lens for efficient heating across the lens. The ring is constructed of lightweight, durable aluminum. Its rigid frame supports the cable circuity and the telescope's Schmidt corrector lens. Unlike other heating bands or strips that inefficiently heat the lens cell to warm the glass, the Celestron Dew Heater Ring heats the corrector glass directly, providing the most efficient transfer of heat to prevent dew formation.

Simply plug the ring into an external 12V DC power source for consistent, continuous heat that will prevent dew from forming even under heavy dew conditions. The Dew Heater Ring features two storage clips to keep the power and thermistor jacks secure when not in use while accommodating the telescope's dust cover.

The Dew Heater Ring also comes with a cable management clip that connects to the telescope's front cell. Corral the power and thermistor jack to prevent them from dangling and reduce unwanted pulls on the cable connection to the rings.

The Dew Heater Ring comes complete with:

• Dew Heater Ring
• Cable management clip
• Power jack extension cable
• Paper installation shield

Enhance your setup

To achieve the highest level of dew prevention while maximizing power efficiency, we strongly recommend pairing the Dew Heater Ring with a Smart DewHeater Controller (sold separately). The controller uses the ring's built-in thermistor and its internal environmental sensor to provide just the right amount of heat to the corrector to prevent dew based upon the ambient temperature, ambient humidity, and temperature of the Schmidt corrector, which can dramatically reduce the ring's power draw, greatly increasing battery life. The ring also includes an extension cable for connecting the ring directly to one of the controllers' heater output ports, or to a third-party controller's heater output port. (Note: the ring's integrated thermistor is only compatible with the Celestron Smart DewHeater Controllers).

We also recommend adding a dew shield to your setup. While not mandatory, a shield will cut down on the amount of power the Dew Heater Ring needs to keep the optics clear.

• Heater ring provides the most efficient heating directly to the corrector lens to prevent the formation of dew
• Permanently mounts to your existing telescope tube for a seamless look–plus, you'll never forget to bring it with you
• Integrated thermistor continuously monitors the temperature of the corrector lens when used with the Celestron Smart DewHeater Controllers.
• Rigid, lightweight, and durable aluminum construction
• Included storage clip and cable management clip keep your cables organized

30-0954RK-263 Aspirator Adapter, Plate Mounted, with Flow Switch for 1 Oxygen / Toxic Sensor in 18-0416RK J-Box by RKI Instruments

Single or dual sensor system is designed to monitor gas atmospheres from extreme conditions with either temperature, moisture, or pressure challenges. A powerful air aspirator can pull a sample from up to 100 feet away. The filtered and conditioned sample gas is then passed across one or two different detectors. Each detector shares a common calibration and compressed air inlet for aspirated flow. This system is fault tolerant removing the need for expensive downtime and maintenance. The sample is diluted with air after the gas sensor and then returned to a common exhaust reducing the danger of potential hazardous gases entering a safe work space.

System integrity is maintained at all times using a flow fail monitoring device which provides a NO contact that activates if the sample line becomes blocked or damaged or if the air supply is removed or interrupted.

The panel can be used with direct-connect (sensors connected to an RKI controller), or with S2 Series, and M2 Series transmitters. All transmitters have a 4-20 mA signal for direct connection to the site DCS, PLC or site control system. If needed, RKI instruments can supply a dedicated Gas Detection Control system to provide local alarms, 4-20 mA output with a wide range of dry contacts, making the system very sophisticated and user friendly.

Integral sample filter included to remove water and dirt, automatic drain type.

RS485 Modbus output options available on the M2 transmitter.

Features:

• Simple to operate
• Long life air aspirator (no moving parts)
• Extreme sample temperatures
• One or two sensors
• Inside/outside location options
• Corrosion resistant construction for extreme environments/samples
• Uses proven RKI technology
• Modular design easy to maintain
• Self draining moisture trap
• Back flush for sample line
• NEMA 4X enclosure options (stainless steel or plastic)

Applications:

• Flammable, oxygen, or toxic monitoring
• Wastewater
• Drinking water plants
• Gas turbine monitoring flammable and CO
• Tunnel monitoring
• Landfill borehole analyses
• Printing press exhaust solvent recovery
• Winery CO2/O2
• Biogas Methane
• Hydrogen Sulfide "H2S" scrubber break through
• Any sample draw gas monitoring application

*Please note we can only ship RKI products to customers within the United States