All Products

CRMBV-3/4 Motorized Ball Valves - Capacitor Return, 3/4", 125°F, 145 PSI Max by Quantrol

Capacitor return motorized ball valves are recommended for cooling tower bleed applications. These fully ported valves pass suspended solids more efficiently than solenoid valves, thus are less likely to stick open or closed. Maintenance requirements are reduced and reliability issignificantly increased. Chemical treatment programs are more effective because total dissolved solids (TDS) stay in the target control range.

• Compact Design
• Full Port 304 Stainless Steel Valve
• IP67 Water Resistant Actuator
• Optional UV Shield for Enhanced Protection
• Motor Power Open/Close
• Open/Close Visual Indicator
• 125° F Max Temp
• 145 PSI Max Pressure
• 5.5 FT, 3 Wire, 18 Gauge Power Cord with Grounding Plug
• 115 Volt, 50/60Hz

27514 Si-CA 130 Gas Analyzer Kit 3BH, includes three gas sensors (O2, CO, NO), 12" (300mm) Probe, ABS hard plastic carrying case by Sauermann

The Si-CA 130 features a touch-screen display and comes with PC-based management software (in addition to the smartphone app) for more in-depth combustion gas analysis. The three field-replaceable cells and sensors offer expanded measurement capability.

• Field replaceable precalibrated sensors
• Large color touch screen
• CO sensor measurement up to 8000 ppm
• Data management with automatic logging & report creation trough app/PC software
• Lightweight, only 350 g (12 oz)
• Up to three gas sensors O₂, CO and NO or Low NO (for NOx)
• Predictive maintenance with estimated sensor life & calibration reminders
• Draft & differential pressure measurements
• Calculated CO₂ % value
• Auto pump cut-off for high CO levels (user-adjustable)
• NOx capable with NO sensor (optional)
• One Touch Pump On/Off with Purge
• PC software with wireless and USB connectivity
• Combustion efficiency & excess air calculations
• Graphical data display
• Customizable gas analysis screen
• Sample conditioning unit for low NOx & high moisture applications
• CO & CO₂ Monitoring in Ambient Air
• Smart Air Temperature Probe
• Protective rubber holster
• Maintenance contracts and extended warranties available

Kit Includes:

• 1 Si-CA 130 analyzer
• 1 O₂ gas sensors
• 1 CO gas sensors
• 1 NO gas sensors
• 1 Low NO gas sensors
• 1 Protective rubber holster
• 1 Flue gas probe with dual hose
• 1 Water trap with filter
• 1 AC power supply / charger
• 1 USB cable
• 1 Mobile app & PC software
• 1 Internal wireless communication module
• 1 Carrying case
• 1 Quick Start Guide
• 1 Calibration certificate

72-2108RK Beacon 800 Eight Channel Wall Mount Controller (No Sensor) by RKI Instruments

For industrial gas detection, the 8 Channel Wall Mount Controller Beacon 800 Model is a simplified gas detection system. The unit is easy to operate and maintain, and a wall mounting kit is included with every purchase. For easy operation, the Beacon 800 has a bright backlit display that provides simultaneous readouts of all 8 channels. The wall unit is cased in a NEMA 4X rated enclosure that is weather tight and resistant of environmental hazards.

For ease of use, the alarm system may be reset through an external reset switch, and the unit features bottom mounted wiring hubs for easy access to wiring. It is also compatible with a variety of accessories that are easily wired directly to the unit, eliminating the need for costly external relays. The Beacon 800 is also compatible with the widest variety of gas detection sensors available by RKI Instruments. With a user oriented design, the Beacon 800 8 Channel Wall Mount Controller is cost effective and versatile for almost any industrial applications.

Exclusive Features

The Beacon 800 Model 8 Channel Wall Mount Controller has several key features.

• The unit is capable of relaying up to 8 separate channels.
• Each channel has 2 programmable alarm levels.
• The wall unit has a very loud audible alarm (94 decibels) with a reset button.
• The alarms are coded with pulsing alarms indicating a gas alarm and a steady alarm indicating a fail alarm.
• The unit also has 4 visual LED light alarms for alarm indications, pilot, and malfunctions.
• It has long life sensors that typically operate for more than 2 years.
• The unit is low cost and versatile.
• The model is controlled by microprocessor technology.

Specifications

The Beacon 800 model has dimensions of 12.5 x 11 x 6.4 inches. It is enclosed in a wall mounting grey fiberglass casing with a hinged cover. It is waterproof, chemical, and weather resistant. The unit has a wiring distance of up to 8,000 feet and accepts any 4-20mA transmitter. The wall mount has a bright backlit alphanumeric display with 16 characters per line and 4 lines each. All 8 channels can be continuously displayed. The unit is powered by 85-264VAC or 24VDC. It comes standard with a one year warranty for materials and workmanship.

RKI Instruments

RKI Instruments is dedicated to innovation in gas detection technologies. For over 70 years, RKI has sold hundreds of thousands of gas detection systems all over the world. The company works diligently to develop new and reliable products for an expanding market which contributes to the company's high rate of growth. Today, RKI has over 700 valuable employees that are experts in the industry. The company takes great pride in its experienced staff of experts, engineers, and scientists. That pride is evident with their consistent release of groundbreaking products.

*Please note we can only ship RKI products to customers within the United States

CP-I-W5X10000-B-00 BW Icon+ Multi-Gas Detector, %LEL(IR) O2  Black by BW Technologies

Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications.

ICON DISPLAY FOR FAST DECISIONS

Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there's a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

INTELLIGENT SENSORS FOR PREDICTIVE MAINTENANCE

How much life is remaining in the H₂S sensor, based on its age and gas exposure? When does the O₂ sensor need to be calibrated? Honeywell BW™ Icon+ has i-Series intelligent sensors that answer these kinds of questions, so you can take action and prevent unexpected downtime.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data — all organized in a report that's ready to send.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CP-I-W5X10000-B-00

6300-2030 MGS-150 Gas Transmitter, NH3: 0 - 100 ppm, IP66 Housing, Low Temp by Bacharach

MGS-150 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, and toxic gases. It comes standard with user-selectable analog and digital outputs that can be set for 4-20 mA, 0-5V, 1-5V, 0-10V, or 2-10V; allowing them to connect directly to most BMS, SCADA or control systems. Alarm indicators include an onboard alarm LED and audible buzzer, in addition to an alarm relay for connection to external audible/visual alarms or a BMS system. The product's alarm threshold value is pre-set to factory defaults but is also field programmable. A variety of housing options are available (shown below), from standard IP41 enclosures to IP66 water resistant housings, which allow the MGS-150 Series gas sensors to be placed in the toughest of conditions.

Ideal for Commercial and Industrial Refrigeration, Food Storage and Food Processing Facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities.

Features & Benefits:

• Infrared, semiconductor and electrochemical sensor options to meet almost any gas detection need - at the most affordable cost.
• User-selectable analog outputs: 4-20 mA, 0-5V, 0-10V, 1-5V, 2-10V featuring 12/24 VAC/VDC operation.
• Fast-response sensors detect leaks quickly, which protect personnel and minimize refrigerant gas usage and environmental impact.
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustible gases & VOCs.
• Robust design and remote sensor options allow units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount, for placement in the toughest of environments.

WD-35607-34 CON 150 Portable Waterproof Conductivity Meter and Probe with NIST Certificate by Oakton

The CON 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you view the conductivity or TDS measurement simultaneously with temperature. Convenient auto-ranging and auto-cal functions for one calibration point per measurement range. Select a two-cell probe with a 0.1, 1.0, or 10 cell constant and automatic temperature compensation (ATC). ATC ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and probe status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons probe status displays cell constant
• Grip-Clip holder quickly and easily secures the probe to your beaker or container
• Expanded data logging for up to 150 data sets
• 700 hours battery life or optional universal power adapter
• Built-in stand and wall-mount option allow for easy laboratory measurement or storage

Part Number: X105310PM6

Measuring Range: -50 to +400 °C

MA9066 100% NaCl Conductivity Calibration Solution - 230 ml Bottle by Milwaukee

The performance of conductivity probes are affected by use due to residue build up and aging.

MA9066 is a lab grade 100% NaCl (EC) solution standard prepared against a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Check your meter or tester's manual to find the correct calibration standard for your meter.

NaCl (EC) readings are effected by temperature. To help with this, a chart of the actual μS/cm value at various temperatures is printed on each bottle

Milwaukee NaCl (EC) solutions are labeled with the lot number and expiration date and packaged in an air tight, tamper-proof sealed bottle.

DESIGN FEATURES

• Fundamental for accurate conductivity measurement.
• Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
• Sealed against light with air tight, tamper proof cap.
• Each 230 mL bottle is marked with lot number and expiration date.
• A temperature chart of the actual μS/cm value at various temperatures is printed on each bottle.
• 5 year expiry date.

*Please note we can only ship RKI products to customers within the United States

08008-23 General Purpose Liquid-In-Glass Thermometer; 0 to 230F, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in laboratory, biology, chemistry, university, photographic, food/beverage, petrochemical, automotive, wastewater and many other general purpose applications.

All Durac thermometers feature markings that are permanently printed on the glass, red spirit liquid that has a dark scale contrasts against a white background.

• Non-mercury red spirit liquid

*Please note we can only ship RKI products to customers within the United States

Part Number: 103L-62A-1.15