All Products

18100060-BA Gasbadge Pro Single Gas Monitor, HCN, AUS by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

FS20X-211-22-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m² (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

• Patented WideBand IR™ Infrared combined with Ultraviolet
• Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
• Patented Electronic Frequency Analysis
• Visible sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Solar blind 90° cone-of-vision
• Dual microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ - Up to 6 pre-fire event data storage
• Event log - Up to 200 events with date and time stamp
• Built-in RS-485 ModBus communication
• Built-in non-isolated 4-20 mA analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic Optical Path and Electronic self-test
• Patented Electronics Module for component protection with plug-in terminations for easy field installation
• Two 25 mm conduit entries or two 3/4" NPT
• Low power consumption
• High RFI and EMI immunity
• FM hazardous area approved
• Ex d ATEX approved
• CU-TR approved
• INMETRO approved
• Meets SIL 2 requirements
• Certified to EN54-10:2002 (option)
• FM 3260 performance

BENEFITS

• Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
• Wide operating temperature range
• Arc welding immunity
• False alarm rejection
• Minimal maintenance for trouble-free operation
• PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
• Suitable for a wide variety of applications

APPLICATIONS

• Refineries and oil production facilities
• Off-Shore platforms
• Turbine/Compressor enclosures
• Acetylene processing and storage
• Oil and Gas pipelines and pumping stations
• LNG/LPG loading and unloading facilities
• Natural Gas and CNG plants
• Ethanol, Methanol, and IPA production and storage
• Crude oil and gasoline storage and tank farms
• Aircraft hangars
• Hydrogen plants and storage
• Paint and solvent storage
• Chemical production, storage, and loading facilities
• Power plants
• Silane gas storage

Part Number: 17L-62A-1.15

MCXL-XUH0-B-OE GasAlertMicroClip XL Detector, Combustible (% LEL, Unfiltered), Oxygen (O2), Hydrogen Sulfide (H2S) - Black Housing, OE version (Other Regions, 2-pin UK plug) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL-XUH0-B-OE

M031-1111-300 MicroRAE Wireless Four-Gas Monitor, LEL / O2 / CO / HCN - Li-ion / BLE by RAE Systems

The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations.

The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker4 and Safety Communicator.

• Man Down Alarm with real-time remote wireless notification1
• GPS module for location
• Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
• Remote notification and Panic function
• Fully automated bump testing and calibration with AutoRAE 2

Industries

Personal protection and general safety and compliance in:

• Lone Worker Applications
• Oil and Gas
• Waste water treatment
• Utilities
• Telecommunications
• Firefighting
• Petrochemicals
• Construction

Optional Accessories

• AutoRAE 2 Automatic Test and Calibration Systems
• Gang Charger (5 units)
• Auxiliary filter
• Hand pump kit
• Truck mount charger

Features & Benefits

• Honeywell ConneXt compatible with Mesh and Wifi wireless configurations
• Compact and lightweight
• IP-67 water and dust-resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology
• Unmistakable five-way local and remote notification of alarm conditions
• Short bump test and calibration time
• Global approval for worldwide acceptance
• Filtered LEL sensor options to inhibit sensor poisoning
• Compatible with Safety Communicator
• Device Management with Honeywell SafetySuite

2106269 Citric Acid Reagent Powder Pillows for Silica, 10 mL, pk/100 by AquaPhoenix

For determination of high range silica by the silicomolybdate method (Hach method 8185), and low range silica by the heteropoly blue method (Hach method 8186).
Pack of 100 Powder Pillows.

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

2100Q01 Turbidimeter, Hach 2100Q by AquaPhoenix

Easiest calibration and verification with accurate results every time.
Measuring and monitoring turbidity is crucial for various industrial and municipalapplications, and Hach's portable turbidimeter, the 2100Q, provides unsurpassed ease of use and accuracy. With over 80 years of experience, Hach is a leader inturbidity measurement and has consistently developed reliable and durable instruments for customers.

The portable 2100Q turbidity meter is ideal for use in the field or around the plant. It is easy to carry around and take multiple measurements from various collection points in your treatment process. With its intuitive user interface, the 2100Q makes it easy to take measurements and perform calibration and verification. Storing and transferring data from a portable turbidimeter has never been easier.

There is also an optional USB+Power module for the 2100Q portable turbidimeter, which allows you to transfer your data directly to a computer.

The 2100Q portable turbidimeter is compliant with USEPA Method 180.1 design criteria.

• Easy on-screen assisted calibration and verification
• Simple data transfer
• Accurate for rapidly settling samples
• Convenient data logging
• Optical system for precision in the field

Contains Mercury. Dispose of according to local, state and federal regulations.

94052 Dew Heater Ring - 9.25" by Celestron

The Celestron Dew Heater Ring is the ideal dew prevention solution for your Celestron telescope. This must-have accessory will improve your observing or imaging nights year-round. The Dew Heater Ring permanently mounts to your 9.25" Celestron Schmidt-Cassegrain and EdgeHD optical tube, replacing your retaining ring, so you'll never be caught without it. The installation process is quick and easy (follow the manual for instructions).

How it works

The Dew Heater Ring replaces the plastic retaining ring on your Schmidt corrector lens for efficient heating across the lens. The ring is constructed of lightweight, durable aluminum. Its rigid frame supports the cable circuity and the telescope's Schmidt corrector lens. Unlike other heating bands or strips that inefficiently heat the lens cell to warm the glass, the Celestron Dew Heater Ring heats the corrector glass directly, providing the most efficient transfer of heat to prevent dew formation.

Simply plug the ring into an external 12V DC power source for consistent, continuous heat that will prevent dew from forming even under heavy dew conditions. The Dew Heater Ring features two storage clips to keep the power and thermistor jacks secure when not in use while accommodating the telescope's dust cover.

The Dew Heater Ring also comes with a cable management clip that connects to the telescope's front cell. Corral the power and thermistor jack to prevent them from dangling and reduce unwanted pulls on the cable connection to the rings.

The Dew Heater Ring comes complete with:

• Dew Heater Ring
• Cable management clip
• Power jack extension cable
• Paper installation shield

Enhance your setup

To achieve the highest level of dew prevention while maximizing power efficiency, we strongly recommend pairing the Dew Heater Ring with a Smart DewHeater Controller (sold separately). The controller uses the ring's built-in thermistor and its internal environmental sensor to provide just the right amount of heat to the corrector to prevent dew based upon the ambient temperature, ambient humidity, and temperature of the Schmidt corrector, which can dramatically reduce the ring's power draw, greatly increasing battery life. The ring also includes an extension cable for connecting the ring directly to one of the controllers' heater output ports, or to a third-party controller's heater output port. (Note: the ring's integrated thermistor is only compatible with the Celestron Smart DewHeater Controllers).

We also recommend adding a dew shield to your setup. While not mandatory, a shield will cut down on the amount of power the Dew Heater Ring needs to keep the optics clear.

• Heater ring provides the most efficient heating directly to the corrector lens to prevent the formation of dew
• Permanently mounts to your existing telescope tube for a seamless look–plus, you'll never forget to bring it with you
• Integrated thermistor continuously monitors the temperature of the corrector lens when used with the Celestron Smart DewHeater Controllers.
• Rigid, lightweight, and durable aluminum construction
• Included storage clip and cable management clip keep your cables organized

Part Number: 17L-50-250

AAA047000 Docking Station II (MGT) with 5 adapter plugs by Senko

Using MGT Docking station lets safety managers maintain large number of devices easily. A Bump test and calibrating devices are the key features to ensure the safety of devices and users. MGT docking station version II fulfills auto calibrating/bump test function by pressing buttons simply. Long-lasting battery life and enough capacity for event logs are one of the noticeable features of Docking Station. With these features, it is possible Safety Managers can maintain all the important event logs that demonstrate users are working within company requirements.

KEY FEATURES

• Zero and span calibration, bump test function
• Indicate the current status of operation by the power LED and unit LED color
• Gas ventilation system to remove a residual gas
• Save the log events after calibration and bump test
• Enable users to adjust the setting points of Docking Station and MGT via IR Link or USB
• Rechargeable battery or power
• Holds up to 4 devices at once

AI4205 T500-S1 AMCO Turbidity Standard Calibration Solution Kit (20/100/400/800NTU) for TN500 by Apera

The standards have a guaranteed one-year shelf life even if you've opened the bottle and happened not to have recapped it tightly.

The convenient submicron polymer suspensions are non-toxic primary calibration standards approved by the US EPA for drinking water analysis for turbidity.

• Standard Calibration Solution Set for Apera Instruments White Light Portable Turbidity Meters (TN500 and TN420)
• AMCO Clear® turbidity standard solutions (20.0 NTU, 100 NTU, 400 NTU, 800 NTU).
• AMCO Clear® is an EPA approved primary standard for calibration of turbidity sensors that is safe, non-toxic and disposable. It is easy-to-use with no dilution or resuspension, and it is available in a wide range of values.

Part Number: P1016400PN

Part Number: 34L-483S

6759 Umbrella, 59" X 59", Blackout Shade Material and V-Cup Mount by Pelsue

The Pelsue Floating Umbrella is designed as a portable shelter for situations where traditional work umbrellas aren't practical. This new umbrella design requires only a smooth clean surface for setup, making it perfect for tight spaces such as those found around Charles cabinets (like those commonly housing telecommunications equipment and other utilities). Thanks to the design of the suction cups it's also possible to attach the umbrella to surfaces that aren't perfectly flat, such as the side of work vehicles and trucks.If you are looking for shade or protection from inclement weather the Floating Umbrella has you covered. Coverage on the with the Floating Umbrella is about 50% greater than the Floating Tent, making it ideal for providing shade. Please note that the umbrella support structure is the same as that sold with the floating tent. You can easily switch out the top you are using should weather conditions change. The suction cups used here are pump operated for a strong hold, our current record is 6 hours on a smooth clean surface.

If you are worried about protection from more severe weather, consider Pelsue's Floating Tent. With 60' roll down sides it's capable of providing 360 degrees of protection.

Why suction cups and not magnets?

Suction cups let the umbrella work on almost any smooth surface, magnets require that the surface is magnetic (generally made of metal). Even with powerful magnets such as those made from neodymium, the surface may not be strongly attract the magnet. Magnets that aren't sufficiently powerful may also slide on the surface increasing the risk of injury. Powerful magnets are also dangerous in their own right. They may crush or pinch the unprepared if they are attracted to a surface. Suction cups are less prone to sliding and spinning, and can't practically cause crushing injuries.

Floating Tent Features

• Adjustable support with three joints to insure versatility in any location. Includes two hinge joints (base can be rotated in two axes), and a ball joint at the top.
• Water/Fire/UV resistant fabric for all portions of the tent.
• Non-Rusting and Rust resistant components for support structure.
• Dual Pump operated suction cups, with hold indicator on pump.
• Carrying case.

200MT-12-Y GMA 200 Series Control Panel with Amber Strobe, 12 Channels, 5 Amp Power Supply by GfG

The GMA 200-MT is our most flexible and advanced gas detection system controller. The design of the GMA 200-MT ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

ATEX 94/9/EC Conformity

The GMA 200-MT provides full conformity with ATEX Directive 94/9/EC, "Equipment and protective systems intended for use in potentially Explosive Atmospheres - Fourth edition September 2012 - Update December 2013". Conformity with ATEX 94/9/EC is explicitly required if switching or control functions for explosion protection are intended via the gas warning system.

Flexible modular design

Each GMA 200-MT module can control up to 16 individual gas transmitters (sensors). GMA 200-MT systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touchscreen computer interface.

Integrated relays

GMA 200-MT systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Relay modules

Each GMA 200-RT relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MT system. Digital connection with the GMA 200-MT controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs. Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MT system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart phone to display or access system information.

GMA 200 power options

GMA 200-MT power options include traditional voltage inputs (2 x 24 V DC, 20-30 V), as well as operation via a redundant, uninterruptible power supply (UPS), ensuring continued operation of the gas warning system even during a power outage.

LED indicator lights

The status of the GMA 200-MT system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Operation via keypad

Operation of the GMA 200 is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Datalogging standard

Measured values, mean values, alarm events and faults are stored on a microSD memory card.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Advanced and flexible controllers for combustible, O2 and toxic gas
• Complete controller package available in 4-16 channel configurations
• Up to 16 analog inputs or 16 digital inputs
• Scalable system with fully programmable menu driven relays
• Flexible, reliable and economic
• Clearly structured, easy-to-use push-button interface
• Backlit graphic LCD changes color to indicate alarm
• Local display, stack light horn and strobe
• Easy-to-install wall mounted enclosure
• Terminal blocks for easy transmitter termination
• Modbus (RS485) output
• NEMA 4X housing

CX2000 Conductivity Transmitter/Controller, 4-20mA, VAC, Relays, 1/4 DIN by Sensorex

The CX2000 is a full-featured Conductivity or Resistivity transmitter/controller. Simply power up your CX2000 with 110-240V AC power and you get a controller with a wide range of useful features:

2 relays, 1 wash control, 2 each 4-20mA outputs (Cond & Temp or Resistivity & Temp).

Calibration is simple with preset standards and can be password protected with a programmable security code.

Mounting choices include: wall or panel.

The large LCD display with auto-sense backlight and contrast adjust makes the CX2000 display so it can be easily viewable in all areas.

Features:

• Hz4-20mA outputs for conductivity or resistivity + temp
• 2 Hi/Lo Relays for controlling alarms, pumps and more
• Large LCD display with auto-sense backlight and contrast setting
• NEMA 4X, IP65 enclosure
• Sample averaging to enhance stability
• Compatible with Sensorex CS8000 and CS150 series sensors

*Please note we can only ship RKI products to customers within the United States