$75 - $100

EFS Stand Adjustable Stand for MiScope MP2 Extended Field by Zarbeco

The MiScope extended field stands are an affordable way to adjust the height on your MiScope Megapixel, lower the magnification and increase the field of view.

When used with the extended field of view MiScope-MP2EF (or MiScope-MP2EF-WUVIR) the EFS stand allows for an adjustable field of view as large as 2.25 inches across at 5x magnification. The EFLstand allows for an adjustable field of view as large as 3.5 inches across at 3.5x magnification.

When used with the MiScope Megapixel 2 the EFSstand and the EFLstand allow for an adjustable field of view as large as one inch across at 12x magnification.

When using the EFSstand at the largest field of view, auxiliary lighting may be required. Our FLLamp below is a low cost solution to add auxiliary lighting when the MiScope Megapixel EF is imaging an object from a distance.

(MiScope Megapixel 2 microscope is not included and must be purchased separately).

When using MiScope MP2EF-WUVIR on a stand, do not use the UV or IR LEDs. Warning: Infrared light is harmful. Do not expose eyes or skin to rays.

Warning: Ultraviolet light is harmful. Do not expose eyes or skin to rays.

MA955 CO2 Gas On/Off Inline Solenoid Valve with 4' Cord 110 Volt Only Includes Fittings by Milwaukee

The solenoid valve is an accessory for the MC122 and the MC125 to automate your dosing of CO2 and makes sure that the plants of your aquarium are always healthy.

MA955, solenoid valve, is supplied with 1.5 m cable.

SX-PH 0 - 14 pH, 3ft, BNC Connection pH Probe by Agrowtek

High quality pH sensor probe for SXH and SXHM transmitters. Made in USA.

GHS1286VY Class 2.3 Dangerous Goods Laser Drum Labels (Vinyl), 100/Pkg by GHS Safety

GHS pre-printed drum labels come with your choice of pictorgram that meets the UN recommendations on the Transport of Dangerous Goods. These labels make an excellent choice for short production runs or re-labeling of product for transportation. These lebels are printed on a Laser Printable Paper or Vinyl stock with a permanent peel and stick adhesive. Use any desktop publishing package to quickly make your own transportation labels. Available in 8.5" x 14" size and packaged in bundles of 100 sheets.

25831 Set of Three Charging Lines with Flow Ball Valves by E Instruments

Set of three charging lines with flow ball valves. 40" (1m) length. Supplied in small bag.

MKLP42-7B Low Pressure Mist Kit for 42" Fans; 7 x 0.012" Nozzles, Black by Schaefer

Instantly convert your circulation fan into a misting fan with Schaefer low pressure misting kits. The misting kits can reduce air temperature up to 30°F with wind from a fan and standard water pressure from an ordinary garden hose. The kits are easy to use with push releasable connections and optional ball valve water shut offs. Available for fans of all sizes, Schaefer mist kits provide an easy economical solution for your evaporative cooling needs.

Features and Benefits:

• 1/4" black polyethylene tubing for durability and resistance to cracking
• Brass and stainless steel nozzles to atomize the water
• Push releasable nozzles and fittings for easy cleaning
• Optional ball valve for quick and easy shutoff of water supply
• Standard garden hose connection for water pressure, no additional power required
• Minimal water consumption, as low as 1.7 gallons per hour, for energy efficiency and low environmental impact.
• 8 foot water supply line connection from ring to base
• Two year warranty
• Made in the USA

H-10-104-30 Carbon Dioxide Colorimetric Gas Detection Tube, 300 - 5,000 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

08068-20 Irreversible 8-Point Vertical Temperature Label, 100-150F/37-65C; 25/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

Reliable proof that the product was maintained at the correct temperature

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

18520-77 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 6" L, .188 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

TK4010-Z EndPoint ID Chlorine Drop Count Test Kit, 1 drop = 5 ppm / 10mL by AquaPhoenix

Our Chlorine Test Kit is used to verify the concentration levels of Chlorine used in the Cleaning and Sanitation Industry. It is used to test Chlorine levels in Alkaline Cleaners, Sanitizer Applications, Wash Water Treatment and Waste Water Treatment. Concentration levels are represented in ppm.