$75 - $100

90260-32 Precision Liquid-In-Glass Thermometer; 30 to 394F, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are inexpensive and safe for use in laboratories, universities, food/beverage, environmental, wastewater, petrochemical, pharmaceutical and many other general-purpose applications. Fractional-degree thermometers offer higher precision. Choose from partial immersion or total immersion thermometers.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include a ring top and a statement of accuracy supplied by manufacturer.

• Nonmercury blue spirit liquid
• Statement of accuracy included

Includes

Ring top and a statement of accuracy supplied by manufacturer

WD-17104-00 InnoCal NIST-Traceable Calibration; Pipettors, with 10 Measurements at 3 Volumes by Oakton

Calibrations on pipettes, dispensers and graduated cylinders are performed per the procedures in ISO8655 using a precision pipette accuracy tester. Before testing, the valves and seals on pipettes and dispensers are tested for integrity using a leak tester. Variable pipettors and dispensers are measured at 3 points at 10, 50 and 100% of the maximum value. Fixed pipettors and dispensers are measured at the nominal value. Evaluation of the unit under test is done for dispensed volume and the coefficient of variability (CV) value.

• NIST-Traceable calibration for pipettors with 10 measurements

H-010-0004-000 Smoke Kit by Honeywell Analytics

Kit Includes

• One box of six smoke tubes
• Aspirator bulb
• Tube tip breaker
• Small soft carrying case

18520-88 Type K Thermocouple Probe Quick DisConnector, Dual with Std-Connector, 12" L, .188 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

S016/G Soaker Bottle Solution, 1 Gal by Sensorex

Extend the life of your pH and ORP sensors by using the Sensorex pH electrode storage solution. When the sensor is not in use, place the sensor glass measurement area into the storage solution. The pH electrode storage solutions are supplied in pints (473 ml).

SA8055-Q Sodium Acetate Solution, 1L by AquaPhoenix

• APHA for lron, 3500-B

Specifications

• Packaging Type: Poly
• Size: 1.00 L

7000-959 Cuvette Methlacrylate, 100/box by AquaPhoenix

10mm × 10mm, 3.5 mL capacity, 100 pack

H-10-106-10 Chlorine Colorimetric Gas Detection Tube, 0.5 - 8 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

18526-64 Economic Cryogenic Probe, 100 Ohm, 6" L, 3 Blade with Mini-Connector, .188 Dia 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request