$75 - $100

TK1027-Z Hydrochloric / Muriatic Acid Test Kit, 1 drop = 0.5% by AquaPhoenix

EndPoint ID Drop Count Test Kit, Hydrochloric / Muriatic Acid

1 drop = 0.5% / 1 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, syringe and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

AI4206 TN500-S2 AMCO 0.0NTU Standard Calibration Solution 100ml by Apera

• 0 NTU turbidity solution refill for Apera Instruments Turbidity Meters
• AMCO Clear° is an EPA approved primary standard for calibration of turbidity sensors that is safe, non-toxic and disposable. It is easy-to-use with no dilution or resuspension, and it is available in a wide range of values.

18520-03 Type K Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 6" L, .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

H-10-103-12 Hydrogen Sulfide Colorimetric Gas Detection Tube, 0 - 150 ppm (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

0590 7501 750-1 Voltage, Continuity, Phase Sequence Tester by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

LX1 USB AgrowLINK by Agrowtek

LX1 USB AgrowLINK™ connects Agrowtek's GrowNET™ sensors, relays or dosing pumps directly to a computer. Free PC software displays real-time sensor readings, downloads and configures data logging history from the sensor, allows on-board calibration, basic email alerts, recipie batch dosing and more!

Connects to any Agrowtek device with a GrowNET™ port. Use the simple update software to upgrade device firmware in seconds when new features are added! Add multiple GrowNET™ devices using HX8 multi-port GrowNET™ hubs.

Communicate directly to GrowNET™ intelligent devices using MODBUS RTU or the expanded GrowNET™ command set.

Features

• GrowNET™ Device: Programmer / Data Link
• USB connection for PC
• Tough ABS plastic enclosure
• Made in USA
• 1-Year Warranty

18520-21 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 12" L, .250 Dia, Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Part Number: M5DC1

AQT20 3M Clean-Trace Total ATP Water Plus Pens, 10 pack by AquaPhoenix

The test is designed to rapidly assess equipment sanitation processes and the efficiency of Clean In Place (CIP) procedures by the improved more accurate detection of organic contamination from microbial or product residues. The test gives an objective indication of cleanliness in water samples in seconds.

Designed for use with the 3M™ Clean-Trace™ NG Luminometer, the new AQT200 formulation now provides the ability to gain more consistent and reliable results providing greater confidence in your hygiene monitoring procedures. The new improved formulation also provides the flexibility to store AQT200 at your own convenience - room temperature for up to 2 months or refrigerated for up to 12 months. 10/case.

AS4044-P Ammonium Sulfate, 2.0M, 500mL by AquaPhoenix

• (Ionic Strength Adjuster for Nitrate ISE)

Specifications

• Packaging Type: Poly
• Size: 500 mL

18526-61 Economic Cryogenic Probe, 100 Ohm, 3" L, 3 Blade with Mini-Connector, .188 Dia 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request

Part Number: H197140LM4

18520-19 Type J Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 12" L, .250 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

AD1596-P Organophosphonate Titrant #2, 500mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 500 mL