$75 - $100

S200C pH Sensor, 12mm, Polymer by Sensorex

The Sensorex S200C is one of our most popular laboratory pH electrodes, due to its reliability and low maintenance design. The pH1600 replaces the S200C/BNC pH probe and has the same design, but features a new Ultem® body for superior chemical compatibility. This pH probe performs to the same specifications compared to the Sensorex S200C and is instantly ready for use as a direct fit replacement.

• New Sensorex S200C
• Durable and chemically compatible Ultem® or body
• Reliable and accurate over the full range of pH measurements
• No refilling or maintenance required with sealed gel-filled design
• Instantly ready for use, and has one year guaranteed shelf life
• One year limited warranty

Part Number: H10351VM1

TK3057-Z Hardness (Trace) Test Kit, 1 drop = 0.5 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Total Hardness

1 drop = 0.5 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

Part Number: CP-SS-K1

18526-64 Economic Cryogenic Probe, 100 Ohm, 6" L, 3 Blade with Mini-Connector, .188 Dia 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request

H-10-104-45 Carbon Dioxide Colorimetric Gas Detection Tube, 0.25 - 3% (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

0590 7501 750-1 Voltage, Continuity, Phase Sequence Tester by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States