$500 - $750

57-1280RK-17 M2A Stand Alone Sensor / Transmitter, Toxic/Oxy, without detector & j-box, specify gas and range by RKI Instruments

The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN.

The M2A represents the latest leading edge technology in sensor / transmitters today.

Features

• Operates with or without a controller
• Direct digital readout with OLED cold temperature display
• Available gases include LEL, O2, H2S, CO, CO2, and 100% Vol CH4 / Toxic gases include NH3, SO2, HCN, and more
• Infrared sensor for combustibles and CO2
• 4-20 mA & digital Modbus outputs standard
• 2 fully programmable alarm relays & fail relay
• Non-intrusive calibration via magnetic wand
• Explosion proof construction
• Patented water repellent sensor cover
• User friendly setup, push buttons & OLED menus
• Long-life sensors (2 + years typical)

*Please note we can only ship RKI products to customers within the United States

WD-18000-28 Ultra-Low Temperature Data Logger with TraceableLIVE® Wireless Capability and Calibration; 2 Probes by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

These data loggers with Wi-Fi provide a simple, efficient, and reliable way to ensure critical samples are not compromised due to temperature variations. Data loggers measure down to -130°F (-90°C) with ±1.8°F (±0.1°C) accuracy ideal for ultra-low temperature freezers. Once setup is complete you can set alarm parameters remotely and generate data reports in real time. Receive alerts for temperature alarm, connectivity interruption, and low battery.

Use the included Velcro® strip to mount the probe to the inside of a freezer. Micro cable on the probe permits freezer door to close on it. Mount the logger to the outside of the freezer with the included magnetic strip or use the built-in bench stand to place on countertop. A large LCD displays probe and MIN/MAX readings.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

*Requires a TraceableLIVE subscription.

For sale only in Australia, Brazil, Canada, China, Europe, India, Japan, Mexico, New Zealand, Singapore, South Korea, and USA.

Includes

Two 316 SS RTD probes with 6-ft (1.8-m) cable, Velcro® strip, magnetic strip, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data.

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration

SSRE-T-MA/DR/500 Smart Remote Electronics, Toroidal Conductivity, 4-20 mA output, DIN Rail Mount, 0-500 mS Range by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

• Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
• Save on costs by only replacing the sensor; keep remote electronics and cabling in place
• Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

• pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
• Simple wiring for each measurement type

Two Versions for Your Ideal Application

• Interface module for DIN Rail installation
• Enclosure box for wall or panel mounting

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

VTS-00032100111 Ventis MX4 Multi-Gas Monitor, O2, Li-ion Ext Range, Desktop Charger, Without Pump, Black, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

1-Phase/Single-Speed Motor, 1/2 Hp, 115/208-230V, 60 Hz, Washdown Duty, Epoxy Coated, 1725 rpm

*Please note we can only ship RKI products to customers within the United States

LPV445-97-65110 Colorimeter, DR300: Wavelength, 655nm by AquaPhoenix

Wavelength:
655 ±2 nm

The Hach DR300 offers reliability while providing state-of-the-art data transfer capability. The DR300 Pocket Colorimeter is the next generation in portable instrumentation infused with the smart capabilities that modern technology has to offer like optional Bluetooth connectivity with single-click data transfer and seamless system integration. Reduce data collection hassles, eliminate transcription errors, and ensure stronger compliance traceability. The DR300 also features upgraded waterproofing and a larger display.

Reagents must be purchased separately.

1325P Axial Blower, Plastic Housing, 1/3HP, 120 Volt AC by Pelsue

The Model 1325P 120 VAC, electric blower is constructed of a durable, weather resistant, high-impact polyethylene plastic. The CSA and CEESI certified unit will accept any 8" blower duct or our model AIRPAC series. The unit also comes in 12 VDC (model 1400P). Weighing only 15 lbs, the units provide as much as 921 CFM. This Model is CSA, CEESI Certified.

VTS-K0001100201 Ventis MX4 Multi-Gas Monitor, LEL (Pentane), Li-ion, Desktop Charger, Without Pump, Black, ATEX/IECEX, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

600-0050-070 Four-Gas Calibration Mix, 58L Aluminum Cylinder (50% LEL / 2.5% Vol CH4, 18% O2, 10 PPM H2S, 50 PPM CO, Balance N2) by RAE Systems

Standard single-gas and multi-gas mixtures for monitor calibration

• Sizes range from 11 liters to 103 liters
• Convenient multi-gas mixtures
• Choose between demand-flow and constant-flow regulators

25558 Si-RM13 Wireless Digital Manifold - Full by Sauermann

This Si-RM13 combines the sturdiness of the analog manifold with digital smart wireless temperature and pressure probes.

This premium package includes a traditional 2-channel analog manifold body (by-pass type) with flexible hoses and a durable block made of anodised aluminum.

DEVICE KEY FEATURES

Smart wireless manifold probes for pressure and temperature measurements in a refrigeration system.

• Light and curved design for easy plug-in to facilities
• Dual valve system for simultaneous measurement and charge/discharge of refrigerant
• Built-in Schrader® cores for easy refrigerant charging
• Range up to 60 bar (870 psi)
• Reduce the use of cumbersome hoses
• Overmoulding for easy handling and protection
• Two temperature clamps
• Long range wireless connection low energy

2-channel manifold body (by-pass type) with flexible hoses and a full aluminium body designed for safety and perfect fit.

SI-MANIFOLD APP KEY FEATURES

General features

• Clear interface for easy reading in any condition
• Gauge, table or graphic visualizations
• Creation of measurements report with possibility to add pictures
• Report exportation in PDF, CSV and XML formats
• Data logging
• Chronometer function
• Free app for iOS and Android devices
• Minimum required versions: Android 4.4, IOS 8.0, BLE 4.0

Manifold features

• Superheat and subcooling real time calculation
• Configuration of superheat/subcooling target values
• Heating and cooling functions
• 126 refrigerant gases with favorite list

Vacuum features

• Vacuum measurement function
• Configuration of vacuum target value
• Temperature of water evaporation

Kit Includes

• 2 pressure probes. Ref: Si-RM1
• 2 temperature probes. Ref: Si-RM2
• 1 manifold body. Ref: ACC25561
• Set of three flexible hoses of 1 m (39") length with stop valves. Ref: ACC25831
• Adjustment certificate
• Simplified User Manual
• 6 AAA batteries
• Elastomer rings
• Robust transport case. Ref: ACC25563