$500 - $750

215TMHD-KFA Industrial 215,000 BTU Kerosene Diesel Forced Air Heater with Thermostat by Master

We know you need your equipment to work as hard as you do. Trust Master Industrial's 215,000 BTU Kerosene/Diesel Forced Air Torpedo Heater to get the job done. This heavy-duty, versatile, multi-fuel heater will warm up to 5375 square feet of your shop, barn, construction site, or wherever you need powerful, dependable heat. This high output heater's time-tested design includes Master's rigorously tested steel construction, cold-start system, plus the built-in convenience and safety features you expect from Master products. Master—built for power.

Features

• Heat up well-ventilated construction sites, workshops, farms, or garages
• New rotor and vane construction delivers 3x the lifespan of these critical wear components, for less maintenance, downtime and cost for replacements
• Includes heavy-duty off-road wheels, vanes, rotors, and temperature controls
• Fuel gauge, so you know when it's time to re-fuel
• 5-Point Safety System, including high temperature limit shut off, flame-out fuel cut, and thermocouple
• Runs on efficient, clean-burning Kerosene and CSA certified to run on #1 & 2 Diesel Fuel, JP8/Jet A Fuel and #1 & 2 Fuel Oil
• 1-year limited warranty
• Made of rugged steel for years of use
• Built-in air pressure gauge and thermostat for efficient operation

1-Phase/Single-Speed Motor, 1/2 Hp, 115/230V, 60 Hz, 840 rpm

14" Ceiling Discharge Kit (TZ-18,24,36)

PFM245G12-3A 24" Direct Drive Poly Exhaust Fan, Aluminum Shutter, Galvanized Blade, 1 / 2 Hp, 3-Phase by Schaefer

If you need a robust and versatile solution for exhausting moderate amounts of air at a reasonable price, look no further than Schaefer polyethylene exhaust fans. These high quality fans are built with rugged polyethylene housings, TEAO motors and polypropylene fan blades for exceptional durability and long life.

Schaefer polyethylene exhaust fans provide an energy efficient and cost effective solution for exhausting air and moisture from a diverse range of facilities including warehouses, garages, greenhouses and more.

Features and Benefits:

• Polyethylene construction for corrosion resistant and effortless cleaning
• Energy efficient, maintenance free motor for both time and money savings
• Direct drive
• Motor and blade combination designed for best-in-class performance
• Integrated PVC or aluminum shutters
• Designed to be flush mounted with interior walls up to 10" thick for use in a broad range of facilities
• Ships fully assembled for ease of installation
• 25 year housing warranty
• Two year product warranty
• Made in the USA

VKT36-O 36" Versa-Kool Mobile Tiltable Fan, OSHA Guards by Schaefer

Schaefer Versa-Kool® mobile drum fans are the portable solution for moving large amounts of air at higher velocities. Designed with "Schaefer-Tough" polyethylene housing and rugged base for impact resistance and to withstand the elements, the fan is ideal for portable personal comfort or livestock and equipment cooling needs in any industrial, commercial or agricultural facility.

Features and Benefits:

• OSHA compliant guards
• Incredibly quiet for its size and performance levels
• Extremely high airflow and air throw, rated up to 18,000+ cfm
• Single and two-speed models available
• UL approved power cord included
• Stacking on OSHA compliant models, excluding 24" models
• Two year warranty
• Made in the USA

In addition, VKM models feature:

• Rubber wheels designed in-line with housing
• Galvanized steel base for complete corrosion resistance inside and out
• Narrow fan profile with ergonomic pull handle and integrated base assembly handles
• Stacking capability up to four fans high

S420C-ORP/BTD ORP Sensor, CPVC, Blue Cap, 1m, Boot BNC by Sensorex

Sensorex offers an industrial grade high quality direct fit replacement for the Strantrol® pH and ORP electrodes. The Sensorex pH & ORP electrodes contain a higher volume proprietary polymer gel for longer sensor life.

These electrodes will provide superior performance at a price that offers an exceptional value.

• Ready to deploy with no modifications necessary
• Quick and simple installation or retrofitting
• Increased electrode life with polymer gel technology
• Suitable for use in a range of chemical environments
• Improved accuracy through superior noise reduction

VTS-00231101111 Ventis MX4 Multi-Gas Monitor, H2S, O2, Li-ion, Desktop Charger, Without Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L0001100801 Ventis MX4 Multi-Gas Monitor, LEL (CH4), Li-ion, Desktop Charger, Without Pump, Black, KOSHA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L0031000709 Ventis MX4 Multi-Gas Monitor, LEL (CH4), O2, Li-ion, No Charger, Without Pump, Black, GOST-R, Russian by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L0033001201 Ventis MX4 Multi-Gas Monitor, LEL (CH4), O2, Alkaline, No Charger, Without Pump, Orange, ATEX/IECEX, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

WD-35660-36 PH260 Waterproof pH and ORP Handheld Meter by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP and temperature

Includes

meter, and 2 AA batteries.

4880 Rotary Viper 15m Long Stainless Steel Connector with M10 Thread 1 Brush Head Perlon 18cm by Wohler

The essential equipment for homeowners and cleaning professionals. The Wohler Rotary Viper Vent M10 makes vent cleaning a breeze. Easy to use, lightweight transport and excellent cleaning results, with the Wohler Rotary Viper Vent you are prepared for the job.

• Clockwise and counterclockwise rotation possible - don't lose your head in the heat of the moment.
• Foolproof and cable-free operation with a conventional cordless screwdriver
• Up to 50 feet long - access every spot in no time at all
• Easy transport and immediately ready for use
• Maximum cleaning success with exchangeable brush heads

Additonal Information

• Wohler Rotary Brush M10 50'
• Perlon brush head 7"

CES-EX-GB-02-80 LED Explosion Proof High Bay, 80W by Global Green

The anti-shock and vibration pattern and tempered glass lampshade design enables the explosion-proof LED high bay lighting to have a higher CRI, reducing glare in applications where users may have direct visual contact with the light source. It can be used for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups Fand G; Class III hazardous environment. The hazardous location high bay light is equipped with corrosion-resistant and high-strength aluminum alloy housing, which is suitable for salt water and corrosive environment. It is very efficient and safe, and multiple installation options, etc., which is very suitable for your project.

Features

• Patent designed to be Curved Fin Shape, maximize the best heat transmit.
• Housing-Aluminum alloy (ADC12).
• LED: LM80 certified, high efficacy, low decay, long lifespan.130Im/W ±5, up to 26000lm.
• Lens-tempered glass (8mm - 10mm) shock & vibration resistant, Super clear, >90% light transmit.
• Meanwell LED Driver, >90% driver efficacy.
• Circuit design: 4KV/6KV Surge Protection power supply.

Application

• Wastewater treatment plants
• Oil and gas refineries
• Petrochemical facilities
• Food and beverage facilities
• Power Plants
• Paper mills
• Shipyards
• Chemical Processing Facility
• Pharmaceutical Plant
• Coal mining plants

VTS-L0001100202 Ventis MX4 Multi-Gas Monitor, LEL (CH4), Li-ion, Desktop Charger, Without Pump, Black, ATEX/IECEX, French by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field