$500 - $750

6250KA Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6110-1113 MGD-100 Gas Detection System, R290a: 0 - 2,000 ppm, 1 Sensor, 2 Alarms, Standard Housing, 110 VAC by Bacharach

Bacharach's MGD-100 Series is a robust and scalable gas detection system used for reliable real-time monitoring of refrigerant, combustible, and toxic gases. It's a stand-alone system that alarms when pre-set thresholds are exceeded. The MGD-100's alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators.

MGD-100 Systems can be configured from single-sensor, one-alarm level systems to larger scale systems consisting of 6 sensors with 2 alarm levels. This flexibility allows the platform to be used for both small and large systems.

Ideal for Chiller Rooms, Supermarkets, Brewing and Bottling Facilities, Industrial Refrigeration, Arenas, Food Storage and Processing Facilities.

Features & Benefits:

• Stand-alone, out-of-the-box solution with quick and easy installation - the most cost-effective system available.
• Fast-response sensors detect leaks quickly, which minimize refrigerant gas usage and environmental impact.
• Infrared (NDIR) CO2 detection
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustibles & VOCs
• Robust design allows units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount.
• Select from 1, 2, 4 or 6 remote sensors and 1 or 2 pre-set alarm levels, which can be connected to BMS systems.

VK24 24" Versa-Kool Circulation Fan, Cord, Mount by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

S675K 12" Insertion Kit for S656KD, 1" NPT, PVDF by Sensorex

Without the need for system shutdown for electrode maintenance, the insertion assembly allows pH measurements to be made in pressurized tanks and main lines. The assembly's adjustable insertion depth allows it to be placed in a turbulent flow region, enabling it to operate in the selfcleaning mode.

In abrasive applications, the electrode is best positioned flush with the pipe wall or tank wall. High suspended solids and viscous liquid pH measurements are simple with the insertion assembly and electrode pair. The specially designed internal makes the electrode mountable in virtually any direction, including inverted. A 1" full-port ball-valve (Sensorex BV-1) is recommended for installation.

New part number S656CD has four protective pads to reduce pH glass breakage. The S656CD replaces the 970283 which is now obsolete. In addition to the protective pad feature, the S656CD also includes our high performance acrylamide gel that provides longer life in many applications.

• Quick disconnect design saves time and money
• Installs in seconds, no tools necessary
• Flat-surface design resists coating
• CPVC or PVDF construction
• Available with or without ATC elements
• Protective tip reduces pH glass breakage (S656CD)

VP5-00001000101 Ventis Pro5 Personal Gas Monitor, Li-ion Battery, No Pump, Black, UL/CSA, English by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

72-0310RKA GX-2009 Personal Gas Monitor, 3 Gas LEL / O2 / H2S with Alligator Clip, 12 VDC Charger & Vehicle Plug by RKI Instruments

Workplace safety is a top priority at RKI Industries. With a reputation as being a world leader in gas detection and sensor technology, the company invests heavily in their research and design team to develop the industry's leading workplace safety products. The GX-2009 Model Personal Four Gas Monitor utilizes advanced technology and efficient design. It is the world's smallest and lightest gas monitor.

The GX-2009 Model Personal Four Gas Monitor

The GX-2009 Model Personal Four Gas Monitor is an obvious choice for many particularly hazardous applications. From personal monitoring in confined spaces to its use in fire services and construction, the portable monitor has been rated intrinsically safe. Its noticeable alarm functions and simultaneous detection of four separate gases help to ensure the safety of workers in potentially dangerous situations. The state of the art monitor can detect LEL, O2, H2S, and CO simultaneously and display the results on the large LCD display screen.

Each of the miniature sensors are manufactured with the high quality control standards of RKI Instruments. The compact sensors utilize catalytic combustion, electrochemical, and galvanic sensor technology.

Alarm System

The unit features dual audible alarm ports at 95 dB, and three bright LED lights for noticeable alerts. The Personal Four Gas Monitor also utilizes an ultra strong vibration alert designed to notify users of atmospheric conditions even when the device cannot be heard. When the monitor is in alarm mode, the backlight on the LCD display is turned on. The multi-faceted alarm system is designed to be noticeable in any given situation and is sure to notify the user and those nearby.

Standard Features

The GX-2009 Model Personal Four Gas Monitor has many standard features including an incredible datalogging function. The datalogging software can store up to 100 calibration records and is compatible with many computer platforms. The log time can range from 10 to 300 hours and houses 8 alarm trends. The unit can also remind users of upcoming calibration and bump tests. With 2 glow in the dark, glove friendly buttons, users can easily operate the device on site.

The unit comes standard with an alligator clip, NiMH batteries, a charging station with VAC power supply, and a product CD with datalogging software.

Specifications

The GX-2009 Model Personal Four Gas Monitor is the smallest and lightest personal gas monitor in the world. Weighing in at less than 5 ounces, the device fits easily in the palm of a hand and is easily portable. Additionally, the IP-67 water resistant and dustproof design contains an impact resistant over mold rubber body to protect the integrity of the device. The unit uses a set of 2 NiMH batteries with 20 hours of operation. Each GX-2009 Model Personal Four Gas Monitor comes standard with a 2 year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

6810885 Sensor, XXS SO2 by Draeger

A small sensor - a giant step into the future: The new DraegerSensor XXS is remarkably compact, and boasts an even higher performance than the competition.

Electrochemical sensor XXS

?
• monitoring of toxic gases and lack of oxygen
?
• compatible with: Pac series and X-am family
?
• measuring range: in vol.-% and ppm

Excellent long-term stability and short response times

Excellent long-term stability and short response times contribute to the user being rapidly and reliably warned about dangerous gases.

Constant development

The continuing development of recognized electrochemical principles and a combination of new miniaturized design elements has made it possible to drastically reduce the volume and weight of the sensors.

High sensitivity and improved gas selectivity

The DraegerSensor XXS stands out thanks to its high sensitivity and improved gas selectivity.

Internal development

All the sensors are developed and manufactured by Draeger, ensuring the highest quality and top measurement performance. When used together with Draeger developed gas detection devices, the full performance of the sensors is realized.

VKC36 36" Versa-Kool Circulation Fan, Chain Mount by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

WD-35614-32 pH 150 Portable Waterproof pH Meter by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

GS-AJ-A-073-G Gasman Single Gas Monitor, 0-20ppm Sulphur Dioxide, Rechargable Battery, French Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

VTS-00401101101 Ventis MX4 Multi-Gas Monitor, NO2, Li-ion, Desktop Charger, Without Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

10153039 Altair Pump Probe, North America, No Charger by MSA

Built on durability

The ALTAIR Pump Probe joins a family of products with a pedigree of durability and functionality. A rugged unibody housing provides unsurpassed durability, including the ability to survive a 10-foot drop. With a large, glove-friendly button for single handed use, the ALTAIR Pump Probe is designed for easy use in any work environment.

Flexibility to meet your needs

Users who occasionally need to use diffusion instruments for pumped applications, the ALTAIR Pump Probe is the ideal solution with sampling options using a sample wand or sample line of up to 50ft. With a universal design, the ALTAIR Pump Probe can be utilized with a number of MSA diffusion type portable gas detector instruments.

Designed with you in mind

The ALTAIR Pump Probe was designed around your needs with a translucent cap for easy filter inspection, tool-free quick change components for simplified maintenance, and compatibility with our ALTAIR chargers.

72-0307RK GX-2009 Personal Gas Monitor, 2 gas, LEL/H2S with Alligator Clip, No Charger by RKI Instruments

Workplace safety is a top priority at RKI Industries. With a reputation as being a world leader in gas detection and sensor technology, the company invests heavily in their research and design team to develop the industry's leading workplace safety products. The GX-2009 Model Personal Four Gas Monitor utilizes advanced technology and efficient design. It is the world's smallest and lightest gas monitor.

The GX-2009 Model Personal Four Gas Monitor

The GX-2009 Model Personal Four Gas Monitor is an obvious choice for many particularly hazardous applications. From personal monitoring in confined spaces to its use in fire services and construction, the portable monitor has been rated intrinsically safe. Its noticeable alarm functions and simultaneous detection of four separate gases help to ensure the safety of workers in potentially dangerous situations. The state of the art monitor can detect LEL, O2, H2S, and CO simultaneously and display the results on the large LCD display screen.

Each of the miniature sensors are manufactured with the high quality control standards of RKI Instruments. The compact sensors utilize catalytic combustion, electrochemical, and galvanic sensor technology.

Alarm System

The unit features dual audible alarm ports at 95 dB, and three bright LED lights for noticeable alerts. The Personal Four Gas Monitor also utilizes an ultra strong vibration alert designed to notify users of atmospheric conditions even when the device cannot be heard. When the monitor is in alarm mode, the backlight on the LCD display is turned on. The multi-faceted alarm system is designed to be noticeable in any given situation and is sure to notify the user and those nearby.

Standard Features

The GX-2009 Model Personal Four Gas Monitor has many standard features including an incredible datalogging function. The datalogging software can store up to 100 calibration records and is compatible with many computer platforms. The log time can range from 10 to 300 hours and houses 8 alarm trends. The unit can also remind users of upcoming calibration and bump tests. With 2 glow in the dark, glove friendly buttons, users can easily operate the device on site.

The unit comes standard with an alligator clip, NiMH batteries, a charging station with VAC power supply, and a product CD with datalogging software.

Specifications

The GX-2009 Model Personal Four Gas Monitor is the smallest and lightest personal gas monitor in the world. Weighing in at less than 5 ounces, the device fits easily in the palm of a hand and is easily portable. Additionally, the IP-67 water resistant and dustproof design contains an impact resistant over mold rubber body to protect the integrity of the device. The unit uses a set of 2 NiMH batteries with 20 hours of operation. Each GX-2009 Model Personal Four Gas Monitor comes standard with a 2 year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States