$500 - $750

*Please note we can only ship RKI products to customers within the United States

CS676HTTC-K=10 Stainless Steel High Temperature Conductivity Sensor (3/4" Extended Length) by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Mounted in 1" cross with reducer to 3/4". Featuring thermally-resistant PEEK insert and high temperature sealing rings to withstand temperatures of up to 200°C. Supplied with 6" PTFE coated leads for junction box connection. For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Extended length for mounting in cross

18109162-2192 Ventis Slide-on Pump Base, Lithium-ion Extended Range battery pack, High Visibility Orange, INMETRO, Czech /Italian /Polish /Portuguese /Russian by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

6300-4109 MGS-150 Gas Transmitter, R22: 0 - 1,000 ppm, IP66 Housing w/Remote Sensor by Bacharach

MGS-150 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, and toxic gases. It comes standard with user-selectable analog and digital outputs that can be set for 4-20 mA, 0-5V, 1-5V, 0-10V, or 2-10V; allowing them to connect directly to most BMS, SCADA or control systems. Alarm indicators include an onboard alarm LED and audible buzzer, in addition to an alarm relay for connection to external audible/visual alarms or a BMS system. The product's alarm threshold value is pre-set to factory defaults but is also field programmable. A variety of housing options are available (shown below), from standard IP41 enclosures to IP66 water resistant housings, which allow the MGS-150 Series gas sensors to be placed in the toughest of conditions.

Ideal for Commercial and Industrial Refrigeration, Food Storage and Food Processing Facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities.

Features & Benefits:

• Infrared, semiconductor and electrochemical sensor options to meet almost any gas detection need - at the most affordable cost.
• User-selectable analog outputs: 4-20 mA, 0-5V, 0-10V, 1-5V, 2-10V featuring 12/24 VAC/VDC operation.
• Fast-response sensors detect leaks quickly, which protect personnel and minimize refrigerant gas usage and environmental impact.
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustible gases & VOCs.
• Robust design and remote sensor options allow units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount, for placement in the toughest of environments.

6179MKA Digital pH/mV/Ion/Temperature Meter Kit by Jenco

The Basis Series 6179M pH/ORP/ION/Temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series 6179M pH/ORP/ION/Temperature Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 point NIST or US buffer calibration for pH, 1 point for mV and 2 to 5 point for ION calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams
• CE, RoHS complaint

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/ORP/ION//Temperature benchtop meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH, ORP electrode or ISE
• 8-Pin DIN for temperature probe

Kit Includes:

• 6179M - Digital pH/mV/Ion/Temp Meter
• GB717DJ-P - pH Electrode, 3-ft Cable, Coil, RF, BNC Connector
• 6230AST - Stainless Steel Temperature Probe 10k Ω Thermistor, 8-Pin Din Connector
• 110/240VAC - 110-240V Power Adapter

*Please note we can only ship RKI products to customers within the United States

0563 4404 440 Humidity Kit with Bluetooth by Testo

This testo 440 kit is great for carrying out measurements in storage, refrigeration, and work rooms, in ventilation ducts, and also on refrigeration systems and heat pumps. The testo 440 air velocity and IAQ measuring instrument and its humidity/temperature probe (Ø 0.47") with temperature sensor can all be safely stored in the included case.

• Intuitive: Clearly structured measurement menus for long-term measurements and parallel determination of humidity and air temperature in storage, refrigerated, and work rooms, and in ventilation ducts
• Precise: Calculate dew point, wet bulb temperature, and absolute humidity
• Convenient: Wireless probes, internal memory for data storage, and USB port for data export
• Versatile: Your testo 440 setup can be expanded with a large selection of digital probes

Kit Includes:

• testo 440 air velocity and IAQ measuring instrument, 3 AA batteries, USB cable, and calibration protocol (0560 4401)
• Humidity/temperature probe (Ø 0.47") with Bluetooth* (consisting of humidity/temperature probe head and Bluetooth handle), 4 AA batteries, and calibration protocol (0636 9731)
• Basic case for testo 440 and 1 probe

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

5921-0030 GDC-350 Gas Sensor Monitor, NEMA 1 Housing, Remote MOS Combustible Sensor by Bacharach

Bacharach's all new GDC-350 full-featured fixed gas monitors provide superior operation - standalone or as part of a larger system utilizing the standard analog outputs. This state-of-the-art instrument can detect a wide range of gases including carbon monoxide (CO), oxygen (O2), combustible gases, refrigerants and total volatile organic compounds (TVOCs). The GDC-350 provides a unique two sensor interface, allowing for multiple gases to be detected with onboard or remote sensors. Sensors can be located integral to the unit or remotely allowing for sensors to be placed directly in areas where potential leaks can occur. Bacharach s proprietary calibration algorithms extend the amount of time required between calibrations, reducing maintenance costs and lowering the overall cost of ownership for non-critical applications.

The GDC-350 has all the features and functionality for any application. LED alarm indicators visually indicate when alarm conditions are met and an audible alarm alerts nearby personnel. An onboard alpha numeric display shows gas readings in real time for each sensor. Integral dry contact relays are available to drive external audible / visual alarms, activate fans, or connect to building management and control systems. Installation and maintenance is simple and easy, reducing overall system cost. A pre-wired plug-in option is available for out-of-the-box operation. Simply plug the unit into any standard AC outlet for immediate detection and protection.

GS-HG-B-073-G Gasman Single Gas Monitor, 0-5% Carbon Dioxide IR, Non Rechargable Battery (single use), French Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

0564 4550 01 550i Smart Kit - App-controlled Digital Manifold with Wireless Vacuum and Wireless Clamp Temperature Probes (NTC) by Testo

The testo 550i digital manifold enables technicians to control their daily servicing and maintenance work on refrigeration, air conditioning systems, and heat pumps entirely from their smartphone/tablet. Equipped with a 2-way valve block and rugged hook, the testo 550i saves you time with its fast and easy measurements, clearly presented results and digital documentation.

In addition, this compact instrument, designed with the most essential features, automatically connects to various Bluetooth probes for temperature, pressure and humidity, thus ensuring maximum flexibility for wireless working. Its proven quality and great durability guarantee the continuously high performance of your manifold in all conditions.

Includes:

• testo 550i digital 2-way manifold including batteries (3 x AAA) and calibration protocol
• testo 552i wireless vacuum probe
• 2 x testo 115i wireless Bluetooth clamp thermometers
• Transport case
• testo Smart App (free download)
• Instruction manuals

• Automatic recognition and controlled by testo Smart App
• Extremely rugged housing with IP 54 for maximum reliability
• The smallest digital manifold on the market
• Common refrigerants list: The most important refrigerants available quickly and easily
• Combine with testo Smart Probes to measure temperature, humidity, and vacuum wirelessly