$500 - $750

*Please note we can only ship RKI products to customers within the United States

72-RC-C GX-3R 3-Gas Confined Space Monitor, LEL / O2 / CO with Li-Ion Battery Pack with 100-240 VAC Charger by RKI Instruments

OSHA defines the breathing zone as a ten inch radius around the worker's nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel. Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor 'In the breathing zone'. Now there is a 4 gas monitor smaller than many single gas monitors.

The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker's breathing zone (2.2" W x 2.55" H x 1.02" D). It simultaneously monitors and displays LEL combustibles, O₂, CO (Hydrogen compensated CO also available), and H₂S.

The GX-3R represents the latest evolution of gas detection technology utilizing a new generation of micro sensors. The LEL sensor has a unique design with two active filaments in one sensor to increase it's resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. The new O₂ sensor is electrochemical with a 3 to 5 year life span. H₂S and CO are now available in a combo micro sensor.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 4 gas monitor: 2.2" W x 2.55" H x 1.02" D, 3.52 ounces
• Simultaneous detection of 4 gases: LEL, O2, H2S & CO; H2 Compensated CO sensor available
• Simple 2-button operation
• Non-Compliance Indicator
• Alarms: audible, visual, & vibration
• 3 user adjustable alarm levels
• Impact resistant body with removable rubber boot
• Large LCD Auto-backlit display
• 25 hours of operation (Lithium-ion battery)
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• Stealth mode for law enforcement
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

VTS-L0201101101 Ventis MX4 Multi-Gas Monitor, LEL (CH4), H2S, Li-ion, Desktop Charger, Without Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

TKIT10 Basic MISC Travel Kit with 10" Tablet by Zarbeco

High resolution imaging has never been more portable thank with the MiScope Travel Kit. Use it onsite for measurement and documentation. Or capture images and bring them back to your office or laboratory for later evaluation, measurement and analysis.

Weighing as little as 9 lbs., the MiScope Premier Travel Kit (for MiScope Megapixel 2 not included ) includes a compact Windows 10" screen tablet/notebook PC , preinstalled with Video ToolBox Premier PC Software, mini-stylus, 4" x 5" back-light slim table, a high intensity LED flashlight with holder, a high precision M-grid calibration disk with holder (or optional upgrade to CaliWedge calibration with software), a MiScope-MP2 stand, and height-adjustment spacer shims; all fitted into a rugged custom premium 4-tray case.

The MiScope Basic Travel Kit (for MISC or MiScope MP2 not included) includes a compact Windows 10" tablet/notebook PC, preinstalled with Video ToolBox PRO PC Software, and a mini-stylus, all in a rugged custom premium 4-tray case.

Features

• Tablet/Notebook Windows 10 PC computer (10" screen)
• Video ToolBox PRO PC Software preinstalled: enhanced display and measurement tools
• Mini-Stylus
• Custom Premium 13" Case: Watertight, shockproof, dustproof, pressure release value, custom premium with 5 tray insert.

Applications

• Forensics: questioned documents and official document verification, drug identification, fingerprints, trace evidence, forensic anthropology and odontology.
• Manufacturing: onsite inspection & measurement at your suppliers or customers
• Field Sciences: entomology, pest management, plant disease, soil analysis
• Inspection: welding, pipelines, metal integrity, flooring (use UV model MiScopes with fluorescent dye penetrants and fluorescent adhesives)
• Accident Investigation

*Please note we can only ship RKI products to customers within the United States

6810887 Sensor, XXS HCN by Draeger

A small sensor - a giant step into the future: The new DraegerSensor XXS is remarkably compact, and boasts an even higher performance than the competition.

Electrochemical sensor XXS

?
• monitoring of toxic gases and lack of oxygen
?
• compatible with: Pac series and X-am family
?
• measuring range: in vol.-% and ppm

Excellent long-term stability and short response times

Excellent long-term stability and short response times contribute to the user being rapidly and reliably warned about dangerous gases.

Constant development

The continuing development of recognized electrochemical principles and a combination of new miniaturized design elements has made it possible to drastically reduce the volume and weight of the sensors.

High sensitivity and improved gas selectivity

The DraegerSensor XXS stands out thanks to its high sensitivity and improved gas selectivity.

Internal development

All the sensors are developed and manufactured by Draeger, ensuring the highest quality and top measurement performance. When used together with Draeger developed gas detection devices, the full performance of the sensors is realized.

MCXL-XU00-Y-AU GasAlertMicroClip XL Detector, Combustible (% LEL, Unfiltered), Oxygen (O2) - Yellow Housing, AU version (Australia) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL-XU00-Y-AU

VTS-L0001101101 Ventis MX4 Multi-Gas Monitor, LEL (CH4), Li-ion, Desktop Charger, Without Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

747575 Nitrate Test: Nitracheck 404 Meter by AquaPhoenix

Nitrachek is a excellent portable pocket size instrument for the determination of nitrates in soil, plants and water. Nitrachek features a memory that can store up to 20 readings. Each stored reading is automatically "tagged" with day/date information.

*Please note we can only ship RKI products to customers within the United States

BWC2R-S24 BW Clip RT 2 Year Single Gas Detector, Sulfur Dioxide (SO2), (Low 2 ppm / High 4 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-S24