$50 - $75

18527-46 Thermocouple Mounting Panel, Horizontal, Standard Connectors; 8 Circuits by Digi-Sense

Use to creat easy to access direct temperature connection in control rooms, test stands, laboratories, and plants. Use with insert panel temperature connectors to create a complete panel assembly. Available in 2, 4, 5 & 6 circuits for Vertical Face Plates and 6, 8, 10 & 12 circuits for Horizontal Face Plates.

Part Number: P10135000PM2

TK1005-Z Acidity Test Kit: 1 drop = 0.1% as Phosphoric Acid / 10mL by AquaPhoenix

Refill Reagents: SH6289-B, PH1605-A

3687 Repair Kit 4.5mm by Wohler

Additonal Information

• Stainless steel end piece
• Screws
• Allen wrench 0.2"

0590 7450 745 Non-Contact Voltage Tester by Testo

The testo 745 non-contact voltage (NCV) tester quickly checks for the presence of voltage in AC powered systems. It can be safely used up to 1000 V AC. When AC voltage is detected, the testo 745 gives indication by flashing RED LEDs and buzzing audible tones.

You can easily determine the hot and neutral legs of an outlet without lengthy and risky removal of the outlet. The testo 745 NCV has a built-in Low Pass Filter which greatly reduces high frequency interference which causes false indications. The built-in LED flashlight is bright and focused to make testing simple in dark spaces. It also includes a low battery indication and is waterproof and dustproof rated per IP 67. The testo 745 is rated to CAT III 1000 V and CAT IV 600 V.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Two sensitivity levels with audible and visual indication
• Flashing LED indicates sensitivity range down to 12 V AC or standard range above 50 V AC
• Differentiates hot from neutral in AC outlets
• Low Pass Filter reduces false indications
• Waterproof and dustproof to IP 67
• Bright LED flashlight illuminates test area

18526-06 Type J Economic Handle Thermocouple Probe with Mini-Connector, 6" L, 36" E x t FEP .188 Dia, Ungrounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Each probe comes with a 3/16" diameter shaft, 36" long FEP extension cable and handle
• Available in grounded or ungrounded junctions.
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

93800-11 Type K Industrial Direct Insert Ungrounded Thermocouple Probe 6" L by Digi-Sense

Thermocouple Probes are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 18 gauge wire and is encased with Magnesium Oxide insulation, and has a 316 stainless steel sheath. Featuring a standard size aluminum protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT(F) opening on the side for easy connection to electrical conduit.

Spring loaded probes: designed to bottom out when inserted in to a thermowell to produce an accurate reading. (Not designed for direct insertion in to medium)

Non-spring loaded probes: designed to be directly inserted into the medium being measured without the use of a thermowell.

MB-2250-P-6PK Mailer Bottles, 250cc, 6/pk, with mailers and labels by AquaPhoenix

Our sample bottle mailer packs make it easy to properly collect, label and ship your samples to the lab for analysis. Mailer bottle packs are available in 250 or 500 mL sizes and include sample bottles, mailer boxes and labels.

TK1350-Z Lactic Acid Test Kit: 1 drop = 0.2% as Lactic Acid / 1mL by AquaPhoenix

Refill Reagents: SH6232-B, PH1605-A

MA991B/1 Combination Glass pH electrode - With BNC Connector and 1 meter cable by Milwaukee

The Milwaukee MA991B/1 is a lab grade single junction, gel filled glass replacement pH Probe for any Milwaukee BNC connector meter This electrode is designed for the education market, is easy-to-clean and great for students to learn with. The MA991B/1 has a glass body, high impedance, low maintenance (no refilling required) and is designed for fast accurate response. It comes with a 1 meter (3') cable, BNC connector and can withstand temperatures to -5 to 70°C (23 to 158°F) (meter(s) sold separately).

The probe connects quickly and tightly with a BNC connector. No worries of slipping off.