$50 - $75

0590 0021 Thermocouple Adapter Type K (770-2/-3) by Testo

Using the clamp meter, it is also possible to measure temperatures in addition to electrical parameters. This adapter is used to attach type K thermocouple temperature probes to your clamp meter.

Simply insert the adapter into the clamp meter and attach a type K thermocouple temperature probe onto the adapter. Please note that temperatures can only be measured in the range between -20 and +500°C.

The adapter enables accurate temperature measurement, because it has ambient temperature compensation.

• For attaching type K thermocouple temperature probes
• Measuring range -20 to +500°C

Includes:

Adapter for type K thermocouples, including lithium battery CR 2032.

*Please note we can only ship RKI products to customers within the United States

18524-79 Type K Ind Thermocouple Probe Probe 4" L, 12" Ext .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

SI1801SCUS11 Tank Pump 23' discharge head (capacity 0.50 gal) 120V by Sauermann

The Si-1801 17' Low Head pump is capable of evacuating 132 gph, and is suitable for condensing boilers & furnaces, industrial refrigeration cases, and air conditioning units.

• Built to Resist: Can endure acidic condensate pH > 2.5
• Easily removable tank for simple maintenance
• Oil & acid resistant flow
• High performance: Discharges condensate up to 17'
• Low sound level: ≤ 45 dBA

Kit content

• One-piece centrifugal pump with 1/2 gal. tank
• Integrated barb end check valve 3/8" o.d. (10 mm)
• 6' power cord
• Safety switch wires (1' bare ends)
• Adaptor: 5/8" i.d., 3/4" i.d, 1" i.d., 1 1/4" i.d.

18527-87 RTD Connector, White 3-Blade ANSI, Female, 5/Pk by Digi-Sense

Choose between white three-blade ANSI miniconnectors or round 3-pin connectors (Oakton® and Digi-Sense® meters only). Available individually and in packs of five.

• Glass-filled nylon construction provides rigidity, strength, and surface hardness

18526-52 Type K Ceramic Thermocouople Probe, 36", Bare Leads, Exp Jct by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Element can be used to replace deteriorated thermocouples in a thermowell
• TheResponse Time: 3 seconds or greater
• Probes are made with 8AWG cable and protected with ceramic beads to allow long term installation in a high temperature environment. The ceramic beads measure 11/16" wide by 21/64" thick.
• Thermocouple junction is twisted to allow continuous readings even if the tip breaks.
• Element can be placed directly into ovens or over flames. This probe is not recommended for use in damp or aqueous environments.
• Custom designs or changes to this product are available upon request.

*Please note we can only ship RKI products to customers within the United States

18524-82 Type T Ind Thermocouple Probe Probe 4" L, 12" Ext .250 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

SH6939-P Sodium Hydroxide Reagent, 500mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 500 mL

Old Part Number: P126550MX2
New Part Number: P126550LM2

18524-92 Type K Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue