$50 - $75

NS4750-Q Nitrate Standard as N, 1000 mg/L (ppm), 1L by AquaPhoenix

Specifications

• Packaging Type: Glass
• Size: 1.00 L
• Hardness: 1000 ppm

Old Part Number: P120820
New Part Number: P120820LA

Old Part Number: P126550MX2
New Part Number: P126550LM2

FC875/T Flow Cell S8000, 3/4" x 3/4" NPT CPVC by Sensorex

The FC875/T Threaded 3/4" CPVC Flow Cell is used for in-line installation of the S8000CD Self-Cleaning Industrial pH Sensor or S8000CD-ORP Self-Cleaning Industrial ORP Sensor.

The FC875/T is part of a complete S8000 package and can be purchased separately, or it is already included in our S8000 Kits listed below:

• S8300 Self-Cleaning In-Line Process pH Sensor
• S8200 ORP Self-Cleaning In-Line Process ORP Sensor

TDSK180/G Conductivity Solution, 85.2ppm/180uS, 1 Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDSNA12.5/G Conductivity Solution, 6956ppm/12,500uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

SH6000-J Sodium Hydroxide, ACS, 100gm by AquaPhoenix

• CAS No. 13010-73-2
• NaOH FW=40.00
• Sodium Hydroxide/UN1823

Specifications

• Packaging Type: Poly
• Size: 100 gram
• Grade: ACS

TK1015-Z Alkalinity (P/T) Test Kit, 1 drop = 50 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, P&T Alkalinity

1 drop = 50 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

B810 pH Buffer Solution, pH 10.00 Buffer Blue (1 gallon) by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition

08077-46 Incubator Verification Thermometer; 15 to 50C by Digi-Sense

Accurately monitor temperatures in freezers, refrigerators, incubators, ovens, and other environments where stability is required. All thermometers are supplied in a glass bead filled unbreakable plastic bottle and can be removed from the bottle for recalibration. Use the magnetic attachment with pressure-sensitive backing to attach the bottle to a metal wall or door.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an statement of accuracy and a triangular-style antiroll fitting.

• An individually serial number is printed on the thermometer stem
• Nonmercury blue spirit liquid

200-WHITE Bacteria Tests: Bacteria/ Fungi Dip Slides,10 pk by AquaPhoenix

The Sani-Check BF dipslide makes the determination of bacterial and fungal counts fast and simple. Each side of the dipslide is coated with a different medium, one side being selective for fungi and the other for bacteria.

Each dipslide is coated in a different medium, one for bacteria and the other for fungi.

Part Number: 10L-322

18525-28 Type J Hermetically Sealed Tip Insulated Thermocouple, 15ft L, 24 Awg by Digi-Sense

Do not subject type J exposed-junction probes to moisture as they will rust

• Each Probe is hermetically sealed and tested to 25psi
• Can be used for applications requiring an isolated junction.
• Response Time: 0.75 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped lead ends Custom designs or changes to this product are available upon request

08006-45 Liquid-In-Glass Oven Thermometer; 20 to 130C, PFA Safety Coated, Organic Liquid Fill, Total Immersion by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PTFE coated for added safety which may cause a slight change in accuracy up to 1 division.

Oven thermometers - designed for high temperature applications and feature a round glass swell to hold the thermometer in place

• Non-mercury liquid

08138-04 TI.30 2.5 Back-Con Bimetal Thermometer, Dial 3", 2.5" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

TK7000-Z Lube Test Kit by AquaPhoenix

1 drop = Test Factor / 20mL

08006-31 Blood Bank Liquid-In-Glass Refrigerator Thermometer; -5 to 20C, PFA Safety Coated, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PTFE coated for added safety which may cause a slight change in accuracy up to 1 division.

These Refrigerator thermometers - indicate temperature ranges at 4°C and 6°C marked with arrows.

• Non-mercury liquid