$50 - $75

Part Number: 17L-304

18523-51 Inconel Type K Thermocouple Probe, Quick Dis-connector, 6" L x 3/16" Dia, Grounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

WD-00652-66 Traceable® One-Shot™ Conductivity and TDS Standard, 1000 μS; 6 x 100 mL Vials by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

DVA30 Current Detector, Extech by AquaPhoenix

Non-Contact Voltage Detection
Non-Contact Current Detection
Identify "hot" conductors and terminals
Trace current carrying conductors behind walls and in conduit

Part Number: 17L-367

GHS1275 Danger Word Placard by GHS Safety

Signal Words are an important part of hazard identification in the HazCom GHS. These highly visible Signal Word placards are designed to be used with HazCom GHS Pictograms.

Available in 6.25" x 15.75" and printed on outdoor grade peel and stick vinyl using durable fade resistant inks.

Part Number: P107215VN

Part Number: P1208100PN

18523-59 Inconel Type K Thermocouple Probe, Quick Dis-connector, 6" L x 1/16" Dia, Grounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Part Number: P126525LM5

08139-04 TI.30 4 Back-Con Bimetal Thermometer, Dial 3", 4" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

Part Number: P126550LM6

08139-01 TI.30 4 Back-Con Bimetal Thermometer, Dial 3", 4" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

Part Number: 10L-300

Old Part Number: P107218
New Part Number: P107218VN