$50 - $75

90205-20 Traceable® Remote Probe Thermometer with Calibration; ±1.0°C accuracy (-20 to 100°C) by Digi-Sense

Magnetic back allows for placement on metal surfaces such as freezers, incubators, or water baths. Includes a flip-open stand for use on bench or desktop, and a spring fastener for clipping onto any edge.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Probe and cable may be totally immersed in liquid
• Readings update every second
• °F/°C switchable ranges

Includes

Probe, cable, flip-open stand, clip, magnetic back, battery, and NIST-traceable calibration certificate with data.

18526-82 Type T Replacement Air Probe, 8" L, with Mini-Connector, .125 Dia. Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Ideal for switching out probes when working with multiple applications.
• Response Time: 1.75-3 seconds or greater
• Each probe comes with a color coded ANSI mini connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

90446-53 Probe Type-K 6" L Heatshrink Fiberglass Standard by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath

Part Number: 10L-302

GHS1238 Boots PPE Hazard Class Pictogram Label (1/2"), 1820/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.

WD-90080-00 Tabletop Thermometer with Alarm/Timer by Digi-Sense

Large split LCD simultaneously displays temperature, time and set point

This unit features a timer that counts down from 24 hours. Press keys on stand to easily set temperature set point, time set point and start/stop memory. Alarm chimes each time your preset temperature is reached, and chimes continuously each time your preset time is reached. Once alarm sounds, timer continues to count up to indicate elapsed time from set point.

°F/°C is switch-selectable. Display pivots on stand or collapses flush with stand for convenient storage or wall mounting. Place on desktop or attach to metallic surfaces with two magnets on back. Includes 6.5" long stainless steel probe with 3.5-ft long stainless steel braid over FEP-insulated wire, and battery.

• Includes probe, 4' cable, AAA battery and instruction manual
• Set audible alarm for temperature and time

08006-12 Dry Block/Incubator Liquid-In-Glass Thermometer; 50 to 110C, PFA Safety Coated, 35mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Incubator thermometers - designed with a swell in the glass to hold the thermometer in place.

• Non-mercury liquid

Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.

341KC2 Single Input K-Type Thermocouple Thermometer with GK11M Probe by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve ± 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Min / Max Record
• Auto Resolution (0.1° / 1°)
• °C/°F Selectable
• Hold feature freezes reading on display
• Auto Off
• Protective rubber boot
• Easy to read LCD display

Includes:

• GK13M temperature probe
• A304 protective boot
• A255 soft pouch

Part Number: P10115PM1

GHS1278VY Workplace Laser Labels, Red Border, Vinyl (8.5" x 11") by GHS Safety

GHS laser printer templates make it easy for you to make your own label for the new HazCom GHS requirements. These paper laser printer ready sheets come with a pre-printed red boarder and pre-cut labels. Use any desktop publishing package to quickly make your own professional looking labels.

Made from laser printable paper with permanent peel and stick backing. If color printing is not an option, use Hazard Class and Personal Protective Equipment labels (sold separately) to complete your labels.

1 label per sheet Sold in packages of 100 sheets