$50 - $75

TDS15000/G Conductivity Solution, 15,000ppm/16,630uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

08142-04 TI.30 12 Back-Con Bimetal Thermometer, Dial 3", 12" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

Old Part Number: P1971050VN
New Part Number: P197150VN

TDS1000/G Conductivity Solution, 1000ppm/1417uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

MiSC-HC MiScope Hard Case by Zarbeco

The hard case with custom foam insert is a rugged, watertight, shockproof, and dustproof case with a custom foam insert designed to hold your MiScope and USB cable.

For field trips or for transport between laboratory to classroom it will keep your MiScope and cable protected, clean, and dry. The custom foam fits snuggly around the Miscope and cable to keep it from shifting when being carried.

Features

• Watertight, shockproof, dustproof
• Custom foam insert holds MiScope and USB cable

08113-31 High Temperature Thermocouple Probe, Fiberglass Insulated Wire, 20G, Exposed, Stripped Leads, Type K; 120" L by Digi-Sense

Fiberglass wire is not recommended for use in moist or wet environments.

Exposed-junction probes are not recommended for use with aqueous solutions.

Do not subject type J exposed-junction probes to moisture as they will rust

• Response Time: 1 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped leads.
• Custom designs or changes to this product are available upon request

98766-08 Traceable Universal Digital Stopwatch with Calibration by Digi-Sense

When zero is reached, the alarm sounds and repeats the countdown from the programmed time. Timing cycle repeats automatically, or until stopped; count area of display shows number of repeat cycles. The dual-line LCD continuously displays time remaining to zero - ideal for analysis that must be noted at routine intervals.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Provides repeat function of countdown alarm timing
• Set pacer function from 0.1 (600 beats/min) to 30 seconds (2 beats/min) - beat counting up to 99 times

Includes

One 3 V button cell, lanyard, and NIST-traceable calibration certificate with data.

Part Number: 10L-427

Part Number: 10L-378

Part Number: 17L-391

90080-06 Traceable® Thermometer with Clock, Humditiy Monitor and Calibration by Digi-Sense

Unique unit simultaneously displays time-of-day, temperature, and humidity. Clock displays AM/PM or 24-hour military time to the exact minute with 0.01% accuracy. Noting changes is easy with triple display. Internal sensors make it ideal for use in hoods, storerooms, clean rooms, incubators, drying chambers, and environmental cabinets. Temperature range is 32.0 to 122.0°F and 0.0 to 50.0°C. Resolution is 0.1° and accuracy is ±1°C. Relative humidity range is 20 to 90%. Resolution is 1% RH and accuracy is ±5% RH mid-range, otherwise 8%. At the touch of a button, memory recalls highest and lowest temperature and humidity readings. Permits monitoring conditions overnight, on weekends, or any time period.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, AAA battery, built-in stand, and wall mount.