$400 - $500

*Please note we can only ship RKI products to customers within the United States

6201-5151 IAM-100 Gas Detector, Remote Sensor/Faceplate, LPG 0-5000ppm, 110 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

MW150US pH/°C Combined Bench Meter by Milwaukee

The Milwaukee MW150 MAX 3-in-1 pH/OPR/Temp. Bench Meter has won fans around the world with its reliable, fast, simple operation as well as a tough, sleek, lightweight design with a small lab space footprint. It is accurate to ± 0.01 pH with automatic or manual temperature compensation, and built in dedicated GLP key. In addition, up to 3-point automatic calibration and 7 selectable buffer standards makes the MW150 MAX ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs.

WHAT PEOPLE ARE SAYING

• "Amazingly accurate, the best meter I have used so far."
• "Very satisfied, very accurate, rugged device that calibrates easily."
• "Rarely needs to be calibrated and gives perfect readings every time."
• "Killer tool, good value."
• "Takes up hardly any space in the lab."
• "Love the GLP function."
• "Large easy-to-read dual displays."
• "Easy to Clean."

SUMMARY

The Milwaukee MW150 MAX 3-in-1 PRO pH/ORP/Temp Bench Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean. From brewers and wine makers to hydroponic growers, labs and water treatment, the MW150 MAX is your Bench Meter for fast, accurate readings.

The Milwaukee MW150 MAX pH Bench Meter offers:

ACCURACY

People choose the MW150 MAX 3-in-1 pH/ORP/Temp Meter to improve the accuracy of their testing program. With up to 3 point calibration and 7 standard buffer choices, the meter can be quickly calibrated to a higher accuracy compared with 1 or 2 point calibration. The MW150 MAX Bench Meter is accurate to ± 0.01 pH. 5x more accurate than some alternative meters.

The meter comes with a double junction pH electrode (included) and temperature sensor MA831R (included) allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).

The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C | +/-0.8°F.

TOUGHNESS

The rugged meter is built to take knocks and is sleek and lightweight.

LOW MAINTENACE

The MW150 MAX pH/OPR/Temp Bench Meter comes with the Milwaukee refillable glass MA917B/1 pH electrode and has a BNC connector allowing easy interchange to any pH Milwaukee electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking and hydroponics, environmental labs and many other applications.

DESIGN FEATURES

• Fast easy to read results with large duel level digital LCD readout.
• Extreme accuracy to ±0.01 pH | +/-0.4°C | +/-0.8°F.
• Extended range (-2.00 pH to 20.00 pH).
• Lightweight and small bench footprint.
• Easy measurement: just place the pH electrode and temp. probe in the sample, gently stir and wait for the reading to stabilize.
• Simple push button, automatic up to 3 point calibration for increased accuracy.
• Up to 7 selectable pH calibration buffers (1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45).
• Refillable, double junction, lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage.
• Automatic Temperature compensation (ATC).
• Built-in rechargeable battery with 8 hours battery life (battery included).
• Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.
• Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).
• Dedicated GLP key function.
• 3 feet probe cables for extra flexibility when testing.

CARE AND USE

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

SENSING BULB

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

REFERENCE JUNCTION

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

CLEANING AND STORAGE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

STORAGE

To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water or DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

CLEANING AN MAINTENANCE

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also:

1. Inspect the electotrode for damage or scratches, if present replace the electrode.
2. Inspect the cable. The connection cable and insulation must be intact.
3. Connectors should be clean and dry.
4. Rinse off salt deposits with water or DI water.

CALIBRATION

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus Bench pH Meter accurate. Also, calibrate after cleaning or a long period of storage.

*Please note we can only ship RKI products to customers within the United States

Part Number: 66L-HCL-10

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

Part Number: U166010PN

Old Part Number: Z100550A
New Part Number: Z100550PA

WD-18000-33 Barometric/Temperature/Humidity Data Logger with TraceableLIVE® Wireless Capability and Calibration by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

Remotely monitor the temperature, humidity, CO₂ or barometric pressure levels of your laboratory, warehouse, greenhouse, and incubator from your personal devices. Continuous data transmission using Wi-Fi provides a simple and reliable way to wirelessly monitor the environment.

Once setup is complete you can securely monitor parameters 24/7, control your alarms remotely, view your data logging history, run reports in real time, and give access to other team members. No local software is required to use the cloud-based data interface. Get mobile push notifications, emails, or texts for temperature alarms, connectivity interruptions, or low-battery condition. Large tripe-line LCD displays ambient and Min/Max readings.

Use the included Velcro® strip to mount the probe to the inside of a freezer. Micro cable on the probe permits freezer door to close on it. Mount the logger to the outside of the freezer with the included magnetic strip or use the built-in bench stand to place on countertop. A large LCD displays probe and MIN/MAX temperatures. A low-cost subscription is required for TraceableLIVE® use.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

*Requires a TraceableLIVE subscription.

For sale only in Australia, Brazil, Canada, China, Europe, India, Japan, Mexico, New Zealand, Singapore, South Korea, and USA.

Includes

Velcro® strip, magnetic strip, wall mount, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data.

Model 18000-33 features a dongle with temperature, humidity, and barometric pressure sensor.

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration

*Please note we can only ship RKI products to customers within the United States

pH6175KA Benchtop pH, mV, ORP, Ion Temperature Meter Kit by Jenco

Jenco 6175 benchtop pH meter is the successor of the popular 6173 benchtop pH meter. While the large LCD display and easy of use remains firmly in place, model 6175 now offers 0.1 mV resolution for ISE applications and a streamlined look.

This pH benchtop is RoHS compliant.

Includes:

• pH6175: Meter
• 600P: pH/Ref Electrode, 3-ft, BNC
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter

• Large LCD display
• High 0.1 mV resolution
• Automatic buffers recognition of US and NIST buffer sets
• Displays electrode efficiency with electrode offset recognition and electrode slope recognition
• Built in buffer temp. coefficient
• Stores calibration data in memory so meter is available for use on power up
• Automatic / manual temperature compensation
• Automatic lock mode and end point sensing lock stable readings
• AC adapter or battery powered (with low battery indicator)
• RoHS compliant