$400 - $500

Portagreen Equivalent Calibration Gas, Hydrogen Sulfide 40ppm, Carbon Monoxide 100ppm, Methane 2.5% (50% LEL), Oxygen 15%, Nitrogen Balance, 116 Liter Portagreen Aluminum Cylinder

AAA064016 SGT-P Replaceable Single Gas Detector, H2 (0~1,000ppm) by Senko

SGT-P is a single replaceable gas detector designed to detect oxygen deficiency and the presence of toxic gas in the ambient environment. SGT-P is the replaceable type of gas sensor and battery. When activated, SGT-P continuously monitors ambient air for the presence of a specific gas and alerts the user to potentially unsafe exposure with LED, vibrating, and audible alarms in the event that gas concentration exceeds alarm set points.

KEY FEATURES

• Sensor and battery replacement available
• Power on / off functionality
• Configuration via exclusive IR Link

Silver Ag+/Sulfide S-2 Double-junction Ion-Selective Electrode (ISE)

Ethylene Oxide (ETO) 58 Liter Cylinder 10 PPM / N2

Old Part Number: Z104010
New Part Number: Z104010

3173K10 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173: Benchtop Conductivity meter
• 107: Conductivity Probe, K=10.00
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

Sensor, CO, 0 - 150 PPM

*Please note we can only ship RKI products to customers within the United States

Cylinder, Calibration Gas, CARBON MONOXIDE PPM 100, NITROGEN BALANCE

Demand Flow Regulator

Nitric Oxide (NO) 58 Liter Cylinder 25 PPM / N2

Old Part Number: Z166025
New Part Number: Z166025PN

BW Technologies Carrying Case for GasAlertQuattro with Foam Insert

Part Number: QTCKCC

6201-5120 IAM-100 Gas Detector, Remote Sensor/Faceplate, ethylene 0-5000ppm, 110 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

EC Replacement Sensor, NH3 0-100 ppm

Cylinder of 500 ppm hydrogen (H2), balance air

BW Technologies Replacement Combustible (LEL) Sensor (filtered, one-series)

Part Number: SR-W1-1S

6201-5107 IAM-100 Gas Detector, Remote Sensor/Faceplate, R410a 0-1000ppm, 110 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

6201-5143 IAM-100 Gas Detector, Remote Sensor/Faceplate, R410a 0-10,000ppm, 110 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

Hydrogen (H2), 0 - 0.01 Vol., Replacement Sensor with 2-Years Warranty

BW Technologies Replacement Sensor PCB for GasAlertMicro 5 IR

Part Number: M5IRSPCB1

6219KB Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 6005C Cable
• 6230A-ST Temp. Probe
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

Chlorine (Cl2), 0 - 10.0 ppm, Replacement Sensor with 2-Years Warranty

Ethylene Oxide (ETO) 58 Liter Cylinder 5 PPM / N2

Old Part Number: Z10405
New Part Number: Z10405PN

Portagreen Equivalent Calibration Gas, Hydrogen Sulfide 25ppm, Carbon Monoxide 100ppm, Pentane 25% LEL, Oxygen 18%, Nitrogen Balance, 116 Liter Portagreen Aluminum Cylinder

PC850 Portable pH/Conductivity/TDS Meter Kit by Apera

The Apera Instruments PC850 Portable pH/Conductivity Meter Kit is designed for lab-grade pH and conductivity measurement in the field with various intelligent functions and a rugged structure.

Instrument Features

• Up to 3 electrodes can be connected to the meter simultaneously for the measurement of multiple parameters.
• Ideal for use in harsh environments - IP57 Waterproof rating, silicone socket protector and grip cover protect the instrument from general impact.
• The large LCD displays pH/mV/conductivity/TDS and temperature along with icons of stable readings and finished calibrations.
• The foldable stand allows use as a benchtop meter.

pH Features

• The high quality 201T-F 3-in-1 pH/temp. pH Electrode built with Apera's unique lithium glass membrane and a lead-free food-grade glass tube ensures quick & accurate pH measurements (±0.01 pH±1 digit) for general water solutions.
• Quick and easy 1 to 3 points auto. pH calibration, automatically recognizing pH standards of 1.68, 4.00, 7.00, 10.01, 12.45.
• Built-in self-diagnosis ensures pH calibration will be performed correctly and guides you on how to fix common problems.
• Standard BNC connector, compatible with Apera's LabSen® Series professional pH electrodes for other applications.
• ORP measurement is available with an ORP probe attached (301Pt-C)

Conductivity Features

• The BPB 2301T-S Conductivity/Temperature Electrode adopts a brush-resistant platinum black coated sensor, which ensures a lab-grade measuring accuracy (±1% F.S ±1 digit) in an ultra-wide range (0 to 200,000 μS/cm / 200 mS/cm).
• Single-tap switch among conductivity, TDS, and salinity.
• Quick and easy 1-3 point conductivity calibration
• Built-in self-diagnosis ensures conductivity calibration will be performed correctly and guides you on how to fix common problems.
• TDS conversion factor can be set from 0.40 to 1.00.

EC Replacement Sensor, Ethylene 0-20 ppm