$300 - $400

BWC2R-H BW Clip RT 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), (Low 10 ppm / High 15 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-H

Part Number: 58L-252-2

RSG-RL10N-E1 Protege SG Reusable Single Gas Monitor, Red, Hydrogen Sulfide Sensor, Low Range by 3M

The Protege SG is a reusable single gas monitor that can be configured to detect 13 gases which provides maximum flexibility to deal with unknown gas hazards. With interchangeable smart sensors, the Protege SG offers maximum versatility in a reusable solution.

Maximum Flexibility:

The plug-and-play swappable smart sensors allow a single monitor to detect several different toxic and combustible gases, supporting multiple applications. Users can change sensors on the go and the monitor will automatically recognise the sensor type and update the gas label on the display. The versatility of the SG allows users to efficiently manage their time. No programming is required when switching sensors.

Easy to Use:

With one-button activation, adjustable alarm settings and an easy-to-read, multi-language display, the Protege SG is intuitive and user-friendly. Turn it on, and the monitor does the rest. With data logging of up to 5,000 events and a customisable LCD display capable of displaying real-time gas readings, the Protege SG is packed with features and functionality, but requires minimal training. The Protege SG is highly versatile and allows the user to configure the monitor based on their application or specific company requirements.

Durable and Reliable:

The Protege SG is available in IP66/67 ingress protection. Using a Lithium replaceable battery provides service life of 1.5 to 2 years for toxic sensors. The sturdy case can withstand the rigours of most industrial environments and is reliable in operating temperatures of -20°C to +50. The Protege SG performs self-diagnostics at start-up giving users confidence to focus on the job. Turn it on and forget about it.

Sensors:

Sensor Options: H₂S, CO, O₂, O₃, HCN, NO, NO₂, PH₃, SO₂, NH₃, Cl₂ and ClO₂.

PT4 Ultrapen PT4 Free Chlorine Equivalent (FC^E) and Temperature Pocket Tester Pen by Myron L

ULTRAPEN™ PT4 is Myron L Company s ground breaking, new Pocket Tester for measuring Free Chlorine Disinfecting Power, Free Chlorine Equivalent (FCE), as well as Temperature. It is waterproof and designed to be extremely accurate, fast, and simple to use in diverse water quality applications.

Includes:

• Battery installed
• Soaker cap
• Scoop
• Pocket Clip
• Holster
• Lanyard
• ORP Electrode Cleaning Paper
• Operating instructions

Features:

• Accuracy of up to ±0.3 ppm FC^E
• Proprietary Sensor Design
• Calibration with pH and ORP Standard Solutions
• Automatic Temperature Compensation
• Temperature Readout
• Waterproof
• Powerd by one N Type Battery (included)

Applications:

• Agriculture
• Hydroponics
• Aquaculture
• Pharmaceutical
• Boilers and Cooling Towers
• Horticulture
• Wastewater
• Food and Beverage
• Irrigation
• Reverse Osmosis
• Plus Many More

NEW! FCE Free Available Chlorine (FAC) Function

The Myron L Company FCE function reports FAC quickly and accurately by measuring ORP, the chemical characteristic of chlorine that directly reflects its effectivity, cross referenced with pH. Both DPD kits and colorimeters may tell the user the FAC value of the sample in the test tube, but since the chemistry of that sample is quite different from the source water being analyzed, the results are imprecisely related to actual disinfection power. The Myron L Company FCE function measures the real, unaltered chemistry of source water, including moment-to-moment changes in that chemistry.

Part Number: 44L-125-50

RSG-RL10N-C Protege SG Reusable Single Gas Monitor, Red, Hydrogen Sulfide Sensor by 3M

The Protege SG is a reusable single gas monitor that can be configured to detect 13 gases which provides maximum flexibility to deal with unknown gas hazards. With interchangeable smart sensors, the Protege SG offers maximum versatility in a reusable solution.

Maximum Flexibility:

The plug-and-play swappable smart sensors allow a single monitor to detect several different toxic and combustible gases, supporting multiple applications. Users can change sensors on the go and the monitor will automatically recognise the sensor type and update the gas label on the display. The versatility of the SG allows users to efficiently manage their time. No programming is required when switching sensors.

Easy to Use:

With one-button activation, adjustable alarm settings and an easy-to-read, multi-language display, the Protege SG is intuitive and user-friendly. Turn it on, and the monitor does the rest. With data logging of up to 5,000 events and a customisable LCD display capable of displaying real-time gas readings, the Protege SG is packed with features and functionality, but requires minimal training. The Protege SG is highly versatile and allows the user to configure the monitor based on their application or specific company requirements.

Durable and Reliable:

The Protege SG is available in IP66/67 ingress protection. Using a Lithium replaceable battery provides service life of 1.5 to 2 years for toxic sensors. The sturdy case can withstand the rigours of most industrial environments and is reliable in operating temperatures of -20°C to +50. The Protege SG performs self-diagnostics at start-up giving users confidence to focus on the job. Turn it on and forget about it.

Sensors:

Sensor Options: H₂S, CO, O₂, O₃, HCN, NO, NO₂, PH₃, SO₂, NH₃, Cl₂ and ClO₂.

Mi413 Free & Total Chlorine (High Range) Professional Photometer by Milwaukee

Milwaukee provides a range of chlorine photometers for all applications: swimming pool treatments, household cleaners, dishwasher additives, laundry powders/liquids and cooling water treatment products all contain chlorine as an oxidizing biocide. Drinking water contains residual chlorine to maintain water purity throughout the supply lines.

Milwaukee offer the Mi413 microprocessor-based instrument with greater resolution, better accuracy and immediate results, for measuring free (0.00 to 10.00 mg/L) and total (0.00 to 10.00 mg/L) chlorine.

*Please note we can only ship RKI products to customers within the United States

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

73-0041RK-03 Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

73-0040RK Gaswatch 2, Model GW2X Single Gas Personal Monitor, 0 - 40% vol. O2 with Watch Band by RKI Instruments

RKI Instruments utilizes the latest technology and research to develop a wide range of workplace safety products. As an industry leader in advanced micro sensor technology, their designs are typically compact, efficient, and affordable. The company has a long-standing track record for innovative technologies and their robust research and development team is constantly seeking new ways to meet the needs of hazardous jobsites. The new GasWatch 2 by RKI Instruments is paving the way for workplace safety products. Its compact design and high portability ensure that the device is always accessible and its dependence on advanced technology guarantees its reliability and accuracy.

GasWatch 2

The GasWatch 2 features an easy and convenient method for monitoring single gases. With three gases to choose from (carbon monoxide, oxygen, and hydrogen sulfide), users can receive a fast and accurate response. Each individual gas sensor is color coded for quick reference and convenience. The unique space saving device fits directly on the wrist similar to a watch. The hands free device monitors the environment for the atmospheric condition and alerts the wearer in accordance with its settings. Its micro sensors use galvanic and electrochemical technology to monitor the air quality. They are inexpensive and are made to be easily replaced while in the field. They also have a life expectancy of over 2 years.

Features

The GasWatch 2 is regulated by advanced microprocessor technology for reliable and accurate readings. Additionally, the gas watch has a triple alarm feature to notify wearers of dangerous conditions. The flashing lights, audible buzzer, and vibration alert is sure to be noticed on the jobsite. The large digital LCD display screen with a backlight will also automatically activate and provide a readout of the gas conditions, PEAK, TWA, and STEL readings. The unit also notifies wearers of possible equipment malfunction. As can be expected, it also tells time.

Although the GasWatch 2 is designed for convenient use on the wrist, the device may also be worn on a belt, hard hat, or protective gear. RKI Instruments makes compatible clips for customers to use when wearing the GasWatch 2.

GasWatch 2 Specifications

Weighing in at approximately 2 ounces, the GasWatch 2 is extremely compact with dimensions of 2.5 W x 1.7 H x 0.9 D. The power source is one coin lithium battery (CR2450). The long life battery can operate for over 3,000 hours or 1 year of normal use with no alarms or backlighting. A typical response time for the unit is approximately 20 seconds for oxygen and 30 seconds for hydrogen sulfide and carbon monoxide. To preserve the integrity and security of the device, the unit is housed in a high-impact casing that is dust proof and weather proof.

The GasWatch 2 has been rated intrinsically safe and comes standard with a 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

Old Part Number: XD166050PN
New Part Number: X166050PN

Part Number: E1049

Part Number: 44L-HCN-5

3675 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large LCD. Connectors are a BNC and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large LCD display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

This is the equivalent of the CG2-C-5-58 from BW

Part Number: 58L-252-5