$25 - $50

*Please note we can only ship RKI products to customers within the United States

Part Number: 17L-50-100

WD-00654-01 pH 1.68 Calibration Buffer Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical solution bottles or individually sealed pH buffer pouches.

All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to ensure quality. ±0.01 pH at 25°C.

OAKTON pH buffer solution bottles are labeled with the name and CAS number for all ingredients (for Right-to-Know requirements), and are supplied with an MSDS (Material Safety Data Sheet).

OAKTON pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• Labeled with pH vs temperature tables for accurate calibration

P100BR Non-Switchable Passive Oscilloscope Probe, 100MHz, 1.2M Cable Length by Test Products International

Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

The IP series monolithic probes have switchable attenuation and are available in 60 and 250MHz. These probes are ideal for technicians that need a basic oscilloscope probe.

The slimline design P and SP series probes are available in fixed or switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup.

TPI also offers three models of high voltage differential probes all with high common mode rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals not referenced to earth ground and provide better performance than a matched pair of single ended oscilloscope probes when measuring these types of signals.

Several important factors must be taken into account when selecting the proper probe.

• The probe should have sufficient bandwidth and rise time for the test instrument and application. Choose a probe with at least an equal bandwidth as the scope it will be used with. For best performance a probe with twice the bandwidth as the scope should be selected
• For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. In addition, if your oscilloscope has readout function, select a probe with this capability
• For differential probes, make sure the maximum differential voltage is adequate for your application and the common mode rejection specification meets the requirements of the tests being performed.

Features

• Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant decreasing by 3dB only as the frequency increases to the maximum bandwidth.
• Bandwidth: The maximum -3dB frequency that can be expected.
• Cable Length: Length of the cable from the end of the probe to the end of the connector. It is important to use a probe with just enough cable length for your needs. Long cables increase the capacitance and propagation delay of the probe.
• Compensation Range: The range a probe can be compensated to match the input capacitance of the test equipment it is being used with.
• IEC 1010: Probes with the IEC 1010 category rating have been designed for safety.
• Input Impedance: The total resistance and capacitance as measured at the tip of the probe. This specification is used to define the loading effect of a probe. At frequencies under 1MHz the input resistance of the probe will have the most influence. At higher frequencies the input capacitance will have the most influence.
• Max Input Voltage: The maximum voltage the probe can be used at.
• Max Differential Voltage: The maximum differential voltage that can be measured by a differential probe
• Readout: Probes with this capability are compatible with readout function oscilloscopes that automatically detect and display the attenuation factor of the probe.
• Rise Time: The time required for the leading edge of a pulse to rise from 10% to 90% of its final value.
• CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any signals common to both test points in a differential measurement

Applications

• Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes
• Logic signal and waveform tests
• Measure voice / data signals
• Analyze power quality
• Test motor control circuits

Markets

• Electronic
• Communication
• Commercial
• Industrial

10-119-20 Trichloroethylene Colorimetric Gas Detection Tube, 5 - 100 ppmv (5 Colorimetric Tubes and 5 Pre-Tubes) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

10-100-15 Ammonia Colorimetric Gas Detection Tube, 25 - 500 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

R-7512 Dissolved Oxygen Test Kit: Refill for K-7512, 30 Ampoules by AquaPhoenix

Oxygen, dissolved — CHEMets® Refill
Catalog No.: R-7512
Method: Indigo Carmine
30 ampoules

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

10-109-20 Nitrogen Oxides Colorimetric Gas Detection Tube, 1 - 50 ppmv (5 Colorimetric Tubes and 5 Pre-Tubes) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

WD-00653-20 2764 µS Conductivity/TDS Calibration Solution 500 mL (1-pint) Bottle by Oakton

Choose from economical 1-pint solution bottles or individually sealed Singles calibration pouches.

All OAKTON Conductivity/TDS calibration solutions are cross checked using different test methods, premixed, and ready to use.

OAKTON conductivity/TDS solution bottles are labeled with the name and CAS number for all ingredients to conform with Right-to-Know requirements, and includes an MSDS. Solutions come in one pint bottles. Dimensions: 7.75"H x 2.25" dia. Shpg wt: 1.1 lbs.

OAKTON Conductivity Singles pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and Conductivity values at 25°C and CAS numbers for Right-to-Know requirements. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• ±1% accuracy at 25°C