$25 - $50

18525-83 Type T Economic Hollow Thermocouple Probe 18" L, 36" E x t 24 Awg .125 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

98766-79 Traceable Waterproof/Steamproof Timer with Calibration by Digi-Sense

This water-resistant timer features easy, three-button operation for error-free programing. Count down from 99 min, 59 sec on the easy-to-read LCD; alarm sounds when timer reaches zero. Count up to 99 min, 59 sec or continuously; timer rolls over again from zero at end of period. Press START/STOP button at any point during a run to trigger time-out and time-in. Suction cup on back may be removed, or used to stick on instruments, walls, shelves, hoods - any flat surface. Flip-out stand allows for placement on a bench.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Use in washdown and humid areas - timer is water-resistant and steamproof
• View from up to 20 feet away - large-digit display

Includes

Stand, removable suction-cup, one 1.5 V button cell battery, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

WD-35850-12 Buffer Capsules, pH 4; 10/Pk by Oakton

Buffer salts inside capsules require 100 mL of deionized or distilled water to produce a clear pH calibration solution accurate to ±0.02 pH (at 25°C) with traceability to NIST standards. Capsules are easier to store and transport than prepared aqueous buffer solutions. Capsules are color-coded for easy identification if mixed.

Store buffer solution in an airtight container at room temperature for three weeks. Unused capsules have a five-year shelf life. Each vial contains 10 capsules.

Fresh pH calibration solution anytime and anywhere

• Each capsule mixes with 100-mL of deionized water to create a clear, 4.00 pH solution

Includes

Ten red-colored capsules.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

90446-57 Probe Type-K 9" L Fiberglass Spade Lugs by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath

0590 0009 Set Alligator Clips by Testo

Crocodile clips are practical when measuring electrical parameters, because you can clamp the cable with them. For mounting, the crocodile clips are simply attached to the Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• For attachment onto Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables
• Delivery quantity: 1 set of crocodile clips

Includes:

1 set of crocodile clips, CAT IV 600 V / CAT III 1000 V measurement category, maximum current 10 A.

*Please note we can only ship RKI products to customers within the United States

10-132-10 Amines Colorimetric Gas Detection Tube, 0.5 - 10 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

08006-18 Dry Block/Incubator Liquid-In-Glass Thermometer; 0 to 80C, 100mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Dry block thermometers - designed for use in all standard heating blocks and water baths with most having arrows indicating critical temperatures.

• Non-mercury liquid

08610-20 Traceable® Mount-Anywhere Analog Clock with Calibration; 1.6 inch Diameter by Digi-Sense

Small size and multiple mounting options makes this clock perfect for the individual work area. Includes hook-and-loop fastener and double-sided tape for wall/surface mounting; flat bottom lets you stand it on your shelf, bench, or desk. White numerals and sweeping second hand provide superior visibility.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Includes hook-and-loop strip and double-sided tape for fast and easy mounting

Includes

Hook-and-loop fastener, double-sided tape, battery, and NIST-traceable calibration certificate with data.