$25 - $50

94460-50 Traceable® Analog Wall Clock with Calibration; Blue Frame/White Face by Digi-Sense

Quartz-crystal accuracy and sealed case make this attractive clock perfect for the laboratory environment. Bright blue face, large munerals, and red second hand provide easy visibility across a room. Move the clock wherever you need it - it's powered by a single AA battery.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

One AA battery, wall mounting screws, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

18525-46 Type J Economic Hollow Thermocouple Probe 6" L, 36" E x t 24 Awg .125 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

90225-38 Traceable® Alarm Timer/Stopwatch with Calibration by Digi-Sense

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Features: count up/down, time-out, alarm
• Numbered keys make it a breeze to set countdown time

Includes

Clip, magnet, flip-open stand, silver-oxide battery, opening for lanyard, and NIST-traceable calibration certificate with data.

10-120-20 Water Vapor Colorimetric Gas Detection Tube, 6-40 lbs / MMCF (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

18527-18 Standard Type-J Thermocouple Male Connector, 2 Pin, Hollow by Digi-Sense

• Molded barriers prevent short circuit and the solid pin design ensures good contact even in demanding applications
• Miniature connectors are suited for small wires and mineral insulated cables
• Connector-body color is brown, calibration type (J or K) is printed on the body

FS2005-Q Fluoride Standard as F, 0.50 mg/L (ppm), 1L by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 1.00 L
• Hardness: 0.50 ppm

94461-15 Traceable® Flashing LED Big-Digit Timer with Calibration; Single-Channel by Digi-Sense

Large digits permit viewing from across the lab. When counting down, green LED flashes every second for the last ten seconds; red LED flashes when zero is reached and the alarm is sounding. Adjustable alarm volume has three settings: high, low, and off. Timer also counts up showing elapsed time after zero was reached. Features magnetic back, flip-open easel stand, and an opening for a lanyard.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means a 17025-accredited calibration test lab has confirmed the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Store three countdown times in memory for your most common uses

Includes

NIST-traceable calibration certificate with data and two AAA batteries.

WD-00652-28 Traceable® Conductivity and TDS Standard, Batch-Tested, 1000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

B210 pH Buffer Solution, pH 10.00 Buffer, (Blue) 1 Quart by Sensorex

Sensorex supplies pH buffers as pre-mixed, ready-to-use, color-coded liquids.-- red (pH4.01), yellow (pH7.00) and blue (pH 10.00). All buffers are guaranteed accurate to within +/- 0.01 pH units @ 25 deg C. Available sizes include pints(473mL), quarts(946mL) and gallons(3.786L). Buffer labels include pH vs. temperature information for precise calibration. Custom buffers are also available on an OEM basis. Please contact Sensorex regarding your requirements.

Electrode storage solution is available in pint and gallon sizes. This is the same solution that is shipped with all pH electrodes and ensures electrodes are ready for immediate use. Storage solution is recommended for long-term electrode storage since it is not color-coded and will not impart any color to the electrode's reference junction.

Features:

• Choice of pH 4.01, pH 7.00 and pH 10.00 or custom formulations
• Pint, Quart and Gallon Sizes
• NIST Traceability Certificates Available at Additional Cost
• Private/OEM Labeling Capability
• Color-Coded for easy recognition