$25 - $50

10-116-10 Phosphine Colorimetric Gas Detection Tube, 5 - 50 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

2314111 CL17 Free Chlorine Buffer Solution by AquaPhoenix

Quality, Reliability - Hach Free Chlorine Buffer Solution is specifically designed and produced to work with Hach CL17 Analyzers.
Simple, Predictable Maintenance - The CL17 is designed to require replacement of reagents on a predictable schedule under typical use. Maintenance can be performed in 15 minutes, and no special tools are required.

CL17 Free Chlorine Buffer Solution. Use with Free Chlorine Indicator Solution (2314011) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.

WD-05942-29 High-Accuracy Buffer Solution, pH 4.000; 500 mL by Oakton

pH Calibration buffers for tight tolerances

• For meters with 0.001 resolution
• Precision reference standard: pH 4.000 ±0.002 at 25°C

*Please note we can only ship RKI products to customers within the United States

WD-98767-79 Traceable One-Shot Buffer Solution, Blue, pH 10.012; 6 x 100 mL Vials by Oakton

• Convenient, single-use vials eliminate concerns of cross-contamination; each pack contains six polyethylene vials with 100-mL of pH buffer per vial
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days

Oakton® Traceable® One-Shot™ pH Buffer Solutions are supplied with NIST-traceable calibration reports stating accuracy at 25°C to ±0.010 pH, in addition to conversion values for pH/temperature - for the most accurate calibrations!

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

Key Features

• All Oakton® Traceable® pH buffer solutions are NIST-traceable reference materials
• Supplied with calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• Individually packed in foil pouch to prevent UV exposure that may degrade accuracy
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• Use to calibrate pH instruments to 10.012
• Color-coded buffer for easy identification

Includes

Individual temperature compensation chart and NIST-Traceable calibration certificate with data

C-7511 Oxygen Comp. (ULR), Dissolved by AquaPhoenix

C-7511 Dissolved Oxygen Comparator is a component of K-7511 Dissolved Oxygen ULR CHEMets Visual Test Kit and is designed to be compared against the color formed in R-7511 Dissolved Oxygen ULR CHEMets Refill. The C-7511 comparator's range is applicable to many industrial and boiler applications. Color standards are pink in color and cover a range of 0-20 ppb Oxygen.

10-100-10 Ammonia Colorimetric Gas Detection Tube, 5 - 100 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

94112-A 1.25" Erect Image 45° Diagonal by Celestron

Did you know that most telescopes work well for daytime viewing as well as for astronomy? If you have a refractor or a catadioptric telescope (the Schmidt-Cassegrain is the most popular example), and you would like to use it for terrestrial observations, the most useful additional accessory you can buy is an erect-image diagonal.

If you look through your telescope with the standard mirror or star diagonal installed, you will notice that objects may be either upside down, flipped so that you see a mirror image, or a combination of the two. This is fine for observations of celestial objects, but it can be a little confusing when you are trying to track a boat as it moves through the water, or an eagle as he flies towards his perch.

Luckily, this is an easy problem to correct. Simply remove the standard diagonal from the telescope's focuser or visual back, and install the Celestron 45° Erect Image Diagonal. Now, when you insert an eyepiece, objects will be right side up and left-to-right correct. The 45° angle of this Amici prism diagonal is very comfortable for daytime observations, where the telescope is often in a horizontal position.

Please Note: Adding an erect-image diagonal to a Newtonian reflector will not result in images that are right side up and left-to-right correct. The optical design of a Newtonian will always produce images that are rotationally off in orientation. This does not mean that you can't use a Newtonian reflector during the day, it just means that you have to get used to objects oriented in unrealistic positions.

• A great accessory for daytime terrestrial viewing with your telescope.
• This 1.25" diagonal produces right side up and left-to-right correct images when used with refractors and catadioptric (Schmidt-Cassegrain) telescopes.
• Inserts into 1.25" focusers or visual backs. Accepts standard 1.25" eyepieces.

WD-00651-10 Traceable® pH Standard Buffer with Calibration, Blue, pH 10; 500 mL by Oakton

Oakton pH buffers are compared against, and are traceable to, NIST Standard Reference Materials. Each bottle includes a NIST-traceable calibration report stating accuracy at 25°C to ±0.010 pH. Color-coded and colorless buffers are available in 500-mL, 1-L, or 4-L packaging sizes. Additional values and packaging sizes are available. Store at room temperature.

Certified Reference Materials (CRM) meet federal, state, and or local agencies' strictest mandates, and deliver exact calibration results for any pH meter. A2LA ISO/IEC 17025:2005 (1750.01) (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material Producer) provide highest achievable levels of product production, documentation, and accuracy. Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001 ensures that world-class product standards for Materials are always met.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

NIST-traceable reference materials include a calibration report from an ISO 17034 and ISO 17025 accredited laboratory

• Choose from clear or color-coded standards from common calibration points
• 500 mL (16 fl.oz.) capacity
• Calibrate at pH 10
• Easily identify blue color-coded formula

*Please note we can only ship RKI products to customers within the United States