$200 - $300

0560 0540 540 Pocket Pro Light Meter by Testo

The sensor of the testo 540 is adapted to the spectral sensitivity of the eye. This makes testo ideal for the measurement of light intensity. The Hold function allows an easy readout of the measurement values. Max. and min. values are displayed at the press of a button. testo 540 is very handy, small and easy to operate.

• Hold function and max./min. values
• Incl. calibration protocol
• Protective cap for safe storage
• Including wrist strap and belt holder
• Sensor adapted to spectral sensitivity of the eye
• Display light

PED30R-B Round Black Pedestal for 20"-30" Fans by Schaefer

A variety of mounting options are available to fit your needs ceiling, pole or post, wall, cart, pedestal and more.

For safety, fans mounted on fan carts and pedestals should be OSHA guarded.

196 Process Meter by Test Products International

The Triple Display 196 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC.

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• COMP:Compare actual reading to preset HI and LOW value for Pass/Fail testing of component
• Hold: Tow hold system automatically holds the previous stable reading when a new one is obtained.
• Large 50,000 count display: increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
• 0-24mA output: t for process controls
• Triple Display: shows more than one reading simultaneously
• 51 Segment Analog Bar Graph: to catch fast AC fluctuations
• Logic Test: Indicates transitions up to 2 MHz.
• Frequency Counter: Measure low frequency signals from 1Hz to 2 MHz and display duty cycle, pulse width and period.
• Back Light (LED Type) allows viewing in any light condition
• Auto Range automatically selects the best range for the measurement
• Separate battery and fuse compartment for easy replacement
• Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on
• Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
• Diode Test displays approximate forward bias voltage
• Process DMM with 0 to 24mA output
• 0.05% DCV basic accuracy
• 0 to 750 ACV; max resolution 100uV
• 0 to 1,000 DCV: max resolution 0.001mV
• 0 to 50MΩ; max resolution 0.01Ω
• Audible continuity
• AC/DC amps up to10 amps; resolution 0.01 uA
• Analog bar graph
• cULus 61010-1

Applications:

• View industrial signals such as motor control, UPS, switching power supplies, and PLC controls with 1MHz bandwidth
• Capture noise spikes, glitches, and intermittents with 20 megasamples per second sampling rate
• Full autoranging, True RMS, DMM capabilities
• Measure resistance and test for continuity
• Continually updated display provides a live presentation
• Water Purification
• Chemical Processing
• Oil & Gas
• Power Generation
• Pulp & Paper
• Food & Beverage

Old Part Number: Z105325MX65
New Part Number: Z105325PM65

Part Number: 58L-451

Part Number: M19788.5VN

Part Number: 58L-403E

0572 0566 174H Mini Temperature/RH Data Logger Starter Kit by Testo

The mini data logger for temperature and humidity, testo 174H, is ideal for monitoring temperature and humidity sensitive goods in storage. The testo 174H also monitors building climate, continuously, securely and unobtrusively. The free software ComSoft testo 174 allows fast programming of the data logger and easy analysis.

Kit Includes:

• 0572 6560 - 174H Mini Temp/RH Data Logger, 2 channel, wall holder, batteries
• 0572 0500 - Desktop cradle for 174T & 174H data loggers, includes USB cable

• Humidity sensor with long-term stability
• High data integrity, even with empty battery
• Large measurement data memory
• Display of the current temperature or humidity value
• Large measuring range
• Compact and robust
• Issue of alarms via display
• Data transfer to the PC via USB interface
• Low-cost temperature and humidity monitoring for living, work and storage rooms
• Easy readout of the data and transfer to a PC via Testo USB interface

Part Number: 44L-428

Part Number: M1978.5VN

WD-35808-89 Semi-dome, Double-junction, Epoxy-body, Polymer Gel-filled pH Electrode (Use with pH 300, pH 310, pH/CON 300, pH/CON 510 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One Waterproof electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a waterproof 6-pin connector for temperature

1455400 Silica Test: Hach Color Disc High Range by AquaPhoenix

• Popular in many industrial applications, such as boiler turbines that are susceptible to scale
• Provides fast results with an easy-to-carry test kit
• Simple, low-cost color disc method is the most accurate visual test kit method

Includes four reagents, deionized water, viewing tube, stopper, color comparator box, color discs, bottle dropper, instruction sheet, and carrying case.

Range 1: 0 - 30 mg/L SiO2
Range 2: 0 - 600 mg/L SiO2