$200 - $300

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

90130-06 Solar-Powered Adjustable-Angle Fahrenheit Thermometer; 6" L by Digi-Sense

View readings from almost any angle by simply adjusting the angle of the head. Three-inch diameter adjustable head has an easy-to-read LCD. Requiring no batteries these thermometers are ideal in pilot plant or research and development applications where exact readings are required. The safety circuit prevents false readings. Each thermometer is housed in a weather-resistant 304 stainless steel (SS) case. Stem is 304 SS. An acrylic lens protects the face. To further protect thermometer order a thermowell from page 1052. Simply match the stem length to the probe depth "A" for the thermowell.

MA852 pH/EC/TDS/°C Amplified Probe With 1 Meter Cable for use with MW805/MW806 by Milwaukee

The Milwaukee MA852D/1 Pre-Amplified replacement pH/EC/TDS/Temp Probe for MW805 & MW806 portable pH/EC/TDS/Temp meters. The MA852D/1 has a rugged body (ABS) designed to take hits, comes with a 1 meter (3') cable, DIN connector and can withstand up to 1 bar of pressure (meter(s) sold separately).

The probe connects quickly and tightly with a screw on DIN. No worries of slipping off.

Part Number: 2992-0016

93831-71 Gen-Purpose RTD Probe 100 Ohm ANSI 3-Blade Connector, 18" L 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

CRMBV-1.0 Motorized Ball Valves - Capacitor Return, 1.0", 125°F, 145 PSI Max by Quantrol

Capacitor return motorized ball valves are recommended for cooling tower bleed applications. These fully ported valves pass suspended solids more efficiently than solenoid valves, thus are less likely to stick open or closed. Maintenance requirements are reduced and reliability issignificantly increased. Chemical treatment programs are more effective because total dissolved solids (TDS) stay in the target control range.

• Compact Design
• Full Port 304 Stainless Steel Valve
• IP67 Water Resistant Actuator
• Optional UV Shield for Enhanced Protection
• Motor Power Open/Close
• Open/Close Visual Indicator
• 125° F Max Temp
• 145 PSI Max Pressure
• 5.5 FT, 3 Wire, 18 Gauge Power Cord with Grounding Plug
• 115 Volt, 50/60Hz

BK-4400-P-PK Beaker, Plastic 400mL - 6 pack by AquaPhoenix

Continuously use Nalgene™ PMP Griffin Low-Form Beakers at temperatures of 150°C with intermittent service to 175°C. These polymethylpentene beakers have the transparency of glass, excellent chemical resistance and heat tolerance. All sizes of beakers have easy to read, silk-screened graduations.

2544800 FerroMo Iron Reagent Set, 0-1.80mg/L by AquaPhoenix

For determination of iron in cooling waters containing molybdate-based treatments. Hach Method 8365. Range: 0.01 - 1.80 mg/L Fe Reagent Set Includes: FerroMo™ Reagent 1 Powder Pillows and FerroMo™ Reagent 2 Powder Pillows for 100 tests.

*Please note we can only ship RKI products to customers within the United States

WD-05992-02 pH Electrodes for Field Use; Double-junction 3 Foot Cable by Oakton

These combination electrodes withstand the most demanding field conditions - the semi-domed tip protects the pH bulb and ensures a quick response when taking measurements in harsh and dirty environments. Easy-to-clean electrodes feature an impact-resistant epoxy body for further protection from the elements. The large, annular ceramic reference junction and sealed cross-linked polymer reference resist clogging.

Operating range is from 0 to 14 pH. Electrodes measure 110 mm L x 12 mm dia and withstand temperatures up to 212°F (100°C). All models have BNC connectors.

• Ceramic reference-junction pH electrodes (clog resistant)

08506-80 Type T Disc Surface Thermocouple Probe by Digi-Sense

Tape vinyl-insulated 10-kt gold-plated disc sensor onto any flat surface.

• Ideal for checking small surfaces
• Grounded junction for safety from contaminants

Includes

5-ft straight PVC-insulated cable with miniconnector.

S8000CD Quick Change Replacement Sensor Cartridge for S8000 Series pH Kit by Sensorex

Our S8000 series of pH deliver the most reliable online pH monitoring in a unique, modular package that minimizes total cost of ownership. These sensor cartridges can be changed in a few seconds with no tools or re-wiring required. Extended sensor lifetime with ERP Reference System.

Features:

• Reliable performance in demanding applications
• Lightning fast sensor changes with no tools required
• Extended sensor lifetime
• All mounting hardware is reuseable. Only replace the quick-change sensor cartridge
• One year limited warranty