$200 - $300

Part Number: M126550LM2

93831-98 RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 12" L, 3ft SS Braid Cable by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

24611 CO50 Carbon Monoxide (CO) Meter by E Instruments

CO50 Portable CO-meter with built-in CO/temperature probe (0 to 500 ppm and -20 + 80°C). 1-line display. Functions: CO, temperature, Hold, change of unit, automatic switch-off. Supplied with soft case and adjustment certificate.

• Easy To Use
• HOLD Function
• 20 Minute Auto Shut-Off
• Carbon Monoxide (CO)
• Temperature
• Built-In Probe
• 2-Line Display
• Adjustment Certificate

94460-07 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer comes with a bottle probe filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

Glass bottle probe with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

SAMTUB Sample Tube and Fitting by Bluelab

Product Features / Benefits

• Perfect for reservoirs located more than 2 metres / 6.6 feet from your controller unit. Place probes directly into the tube ports for direct measurement of nutrient solution
• Fittings included

*Please note we can only ship RKI products to customers within the United States

94460-39 Traceable® Memory-Loc™ Datalogging Thermometer with Calibration; 2 Bottle Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period stores over 1 million temperature observations. Datalogger will stop recording when storage is full and will not overwrite recorded data. Memory can be cleared after downloading data and alarm events. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator include audio alerts and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Unit continues to record data while downloading data. Sampling rate is 5 sec (10 sec for models 98768-55, -56, -59, and -60). Select logging interval ranging from 1 min to 24 hours. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. Probe is attached to a 10-ft (3 m) microcable that permits a door to close on it. Mount meter with included Velcro™ strips, wall-mount slots, or use flip-open stand on benchtop.

Select from glycol-filled glass, or vaccine bottle probe(s), standard plastic Bullet™ probe(s), or stainless steel probe(s). Bottle probes contain nontoxic glycol solution which is considered GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door. Vaccine bottles are designed to fit vaccine trays. Use standard Bullet probe to measure air and liquid temperatures. Bullet probe sensor and cable may be completely immersed; sensor measures 3/4"L x 0.187" dia (19 x 4.75 mm). Durable stainless steel probes measure 6-1/4"L x 0.125" dia (159 x 3.18 mm) and withstand both low and high temperatures ideal for measuring temperatures of air, liquids, and semi-solids.

Thermometer comes with bottle probes filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Store up to 10 unique alarm events, memory can be cleared after downloading data
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

NIST-Traceable calibration certificate with data, bottle probes with 10-ft cable, magnetic strips, Velcro® strips, flip-open stand, and batteries.

*Please note we can only ship RKI products to customers within the United States

Part Number: DX-PS-UK

Part Number: M1072.8VN

Old Part Number: X10795A
New Part Number: X10795PA

CS8000TC-K=1 Heavy-Duty Contacting Conductivity / TDS Sensor by Sensorex

Ideal for continuous monitoring in boiler, cooling tower, and other process applications, the CS8000 is a convenient and reliable conductivity monitoring probe.

The probe installs in seconds, with a keyed flange to ensure proper sensor orientation. Cleaning, calibrating, and replacing sensors has never been easier. The S855 cable assembly detaches from the sensor body in seconds with no tools required, just hand loosen the knurled nut and remove the sensor. Flush mount graphite measuring suface is easily cleaned with detergent and a soft bristled brush.

Temperature compensation is included with a choice of sensor types (10K NTC, 30K NTC, Pt 1000RTD & Pt100 RTD) to match the requirements of your conductivity transmitter or controller. Compatible with Sensorex controllers and transmitters as well as those from other manufacturers.

Order the CS8000TC by itself, or in a pre-configured kit that includes the cable assembly and flow cell.

Features:

• Installs in seconds with no tools necessary
• Quick disconnect cable enables easy sensor maintenance
• Flat measurement surface resists coating
• Built in automatic temperature compensation Compatible with a wide range of transmitters and controllers

*Please note we can only ship RKI products to customers within the United States

0590 7602 760-2 Digital Multimeter with TRMS, Capacitance, LPF, Auto Setup, Duty Cycle & Temperature by Testo

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket. This prevents accidentally blowing the meter's fuse because of incorrect connections. The function and range settings are always correct because the measurement parameters are detected and set automatically. Three easy-to-read buttons replace the traditional rotary switch when selecting manual test functions.

Additional benefits:

• APO (Auto Power Off) saves battery life
• Overmold housing makes it rugged
• Large, backlit, dual readout display with analog bar graph is easy-to-read
• Lead holder conveniently molded into housing for easy storing

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• Auto test-setup based upon lead connection prevents blown fuses in the meter
• Meter prevents switching from V to A or A to V if leads are not in the proper socket
• Meter automatically detects testing in-process and selects correct meter configuration to save time and optimize accuracy
• 3 buttons that illuminate for easy and clear selection of test functions
• Low Pass Filter and Duty Cycle standard
• Measure up to 400 A with optional clamp probe adapter
• Heavy Duty - Drop and water resistant for tough conditions

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States