$150 - $200

Part Number: 221L-319

Part Number: 103L-323E

Old Part Number: 101830N
New Part Number: J101830PN

Part Number: 103L-321

Part Number: 221L-392

Part Number: 103L-364

90445-65 Low-Ranger TD, 3-Wire, 100 Ohm, 1/4" OD, 6" L, Al/SST, 0.1% by Digi-Sense

These RTD assemblies consist of a single Low Range or High Range Wire Wound element constructed of 316 Stainless Steel sheath material, assembled together with an Aluminum screw cover connection head.

• 316 Stainless steel sheath material
• 1/2"' X 1/2"' NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover connection head
• Low range or high range wire wound elements
• .00385° C temperature coefficient
• Custom built assemblies available upon request

08083-03 TI.32 9 Bimetal Thermometer, Filled, Adjustable Angle, 3" Dia/9" L; 50-300F/10-150C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

0560 9250 925 Type K Thermometer by Testo

The one channel temperature measuring instrument for connection to reliable, fast-action thermocouple probes. An additional temperature probe can be displayed in testo 925; data is transmitted by radio, i.e. wirelessly. An audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed on site on the Testo fast printer.

• 1 channel measuring instrument with optional radio probe
• Wide range of probes
• Continuous display of max/min values
• Hold button to freeze reading
• TopSafe, indestructible case, protects from dirt and impact (option)
• Display light
• Special probes for industrial kitchen sector
• An audible alarm sounds when limit values are exceeded

Part Number: 221L-360

17050-10 InnoCal NIST-Traceable Calibration; Stroboscope by Digi-Sense

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005

InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

Please see part number 17050-00 for combination contact/non-contact tachometers.

• Calibration service for stroboscopes