$150 - $200

98767-63 Traceable Excursion-Trac™ Datalogging Thermometer with Calibration; 1 Vaccine Bottle Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with a vaccine bottle probe filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

KEY FEATURES

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display - shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

vaccine bottle probe with 10-ft cable, flip-open stand, hook-and-loop strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

This is the equivalent of the CG-TR103-1 from BW

Part Number: 103L-310-18

WD-35661-00 DO300 Replacement DO Sensor Cap by Oakton

For your convenience, calibration standards, sensor heads, and sensor cartridges are available for your Oakton meters.

• Suitable for use with Oakton 300 series smart meters and meter kits
• Replacement DO sensor cap for 35660-96 and -98 DO sensors

Part Number: 221L-338

WD-17040-30 InnoCal NIST-Traceable Calibration; Pressure/Vacuum Gauge, Accuracy ?1% by Oakton

If your experiment or process relies on pressure and vacuum measurements, make sure these instruments remain precise through regular calibrations. InnoCal® performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments from:

• Gauge, Absolute and Differential Pressure from 0 to 20,000 psig (1.38 mPa)
• Vacuum from 0 to 29.2 in. Hg (986 mBar)
• Barometric pressure from 700 to 1100 mBar

We can calibrate all styles of pressure and vacuum equipment including analog/dial gauges, digital gauges, transducers and transmitters, pressure calibrators, manometers, barometers, deadweight testers, and pressure comparators.

InnoCal services all major brands of pressure equipment including Ashcroft®, WIKA®, Crystal Engineering, Fluke®, Druck, GE Sensing, Cole-Parmer®, Extech®, 3D Instruments™, and many more!

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

90445-66 Low-Ranger TD, 3-Wire, 100 Ohm, 1/4" OD, 12" L, Al/SST, 0.1% by Digi-Sense

These RTD assemblies consist of a single Low Range or High Range Wire Wound element constructed of 316 Stainless Steel sheath material, assembled together with an Aluminum screw cover connection head.

• 316 Stainless steel sheath material
• 1/2"' X 1/2"' NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover connection head
• Low range or high range wire wound elements
• .00385° C temperature coefficient
• Custom built assemblies available upon request

0590 0003 Current Clamp Adapter for 760-2/-3 by Testo

You can easily manage even in tight spots with this clamp meter adapter! The movable pincer arm can be fully retracted, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook.

The clamp meter adapter for non-contact current measurement makes direct / alternating current measurement up to 400 A AC/DC possible. You can attach the clamp meter adapter to a suitable digital multimeter made by Testo or to other makes of digital multimeter which have a resolution in the mV range.

• Fully retractable pincer arm - ideal for measurements in tight places
• Direct / alternating current measurement up to 400 A AC/DC possible
• Display of 1 mV per A
• Overvoltage category CAT IV 600 V

Includes:

Clamp meter adapter for non-contact current measurement, including three AAA batteries.

610-0022-000 Three-Gas Calibration Mix (CO 50 PPM / CH4 50% LEL (2.5% VOL) / O2 18%, Balance N2), 34 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve

*Please note we can only ship RKI products to customers within the United States

Part Number: 103L-36-2

Pro-Kool Evaporative Cooling Pad, 8" X 12" X 54" - 4 Required Per Unit

Part Number: 221L-370

*Please note we can only ship RKI products to customers within the United States