$150 - $200

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

93831-80 Hypodermic RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 2" L, 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

*Please note we can only ship RKI products to customers within the United States

Old Part Number: 101810N
New Part Number: J101810PN

90551-39 Sil-Filled Bottom-Con Bimetal Thermometer, 3" Dial, 24" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200F

BEM500 pH/EC/TDS Combo Mini-Bench Meter by Milwaukee

• Faster Processor with The New Chipset and Motherboard
• 100% Larger & Easier To Read LED Display
• Smaller, Ergonomic & Lighter Case Design
• Includes 9vDC power supply, mounting Kit, SE600 Combo probe, probe holder, and a 20ml sachet of calibration solution of pH 7.01, 1500ppm, and 1413µS/cm

0516 1035 Service Case for Measuring Instrument, Probe and Accessories by Testo

Service case for measuring instrument, probes and accessories, suitable for measuring instruments testo 435 / testo 635 / testo 735

Dimensions: 454 x 319 x 135 mm

08082-03 TI.32 6 Bimetal Thermometer, Filled, Adjustable Angle, 3" Dia/6" L; 50-300F/10-150C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

4339-H Spin Touch Disks, 50 pack by AquaPhoenix

For use with LaMotte WaterLink Spin Touch Photometer. Includes 50 cooling tower disks. Each disk provides 1 test for all parameters.

Alkalinity, Total (0-250 ppm)
Bromine (0.00-33.00 ppm)
Chlorine, Free (0.00-15.00 ppm)
Chlorine, Total (0.00-15.00 ppm)
Chlorine, Combined (0.00-15.00 ppm)
Copper (0.00-6.00 ppm)
Hardness, Calcium (0-800 ppm)
Hardness, Total (0-1200 ppm)
Iron, Total (0.0-6.0 ppm)
Phosphate (In Development)
Silica (In Development)

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

FB7690-G Fluoride Buffer, 4L by AquaPhoenix

• SeeTISAB III
• APHA For Fluoride, 4500-C

Specifications

• Packaging Type: Poly
• Size: 4.00 L

Part Number: J19711000PA