$150 - $200

Part Number: 221L-154-30

Part Number: 34L-316

Part Number: 103L-383S

Part Number: 34L-135A-1.5

Part Number: 103L-399-15

Part Number: 221L-62A-50

WD-17001-06 InnoCal NIST-Traceable Calibration; Thermistor Probe (Probe Only) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

InnoCal's Metrology Laboratory is accredited to ISO/IEC Guide 25 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate
• Four test points across range of instrument
• Meter, probe, and system: -80 to 150°C (-112 to 302°F)

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

VTBPRO-NK-002 Video ToolBox PRO Software Without USB Key by Zarbeco

Video Toolbox™ PRO is the easiest way to display and capture video on your laptop or desktop computer. Save a single image, a movie, a time lapse sequence, or capture the image directly into your favorite image-editing software (like Photoshop™) for enhancement or annotation. Print or e-mail images without leaving the program. It also has enhanced measurement tools.

Video Toolbox™ PRO provides the tools you need to produce high quality images for live display or capture. Interactively adjust brightness, contrast and color settings. Zoom-in up to 4x without pixelation. Make precision measurements directly on the live image. Add labels, markers, even freehand drawings right on the live image. The enhanced measurement tools include reticles.

Plug-ins are available which increase the capability for image enhancement and automation. You can even write your own Video Tools.

Video ToolBox PRO works with most USB, USB 2.0 and FireWire cameras which use DirectX WDM drivers and is included with the more advanced Zarbeco-made products. For analog video cameras, look at our USB VideoLink 2.0 adapters which put full-speed video into any computer including laptops.

Features

• Enhanced measurement tools: drag tools to measure distance, radius and angle, click tools to measure distance, radius, arc radius, angle
• Display live video in a resizable and zoomable window, up to full screen
• Capture images, time lapse video and movies.
• Add labels, markers and time stamps, all on the live image.
• Measurement on the live image using multiple measurement tools and reticle and calibrate for different magnifications (store and recall up to 8 magnifications).
• Enhanced digital zoom (without pixelation) up to 4x and fit to screen (including full screen for computer projector).
• Picture-in-picture freeze frame to view captured and live image simultaneously
• Adjust camera and light settings.
• Capture images directly into your favorite image editor like Photoshop™.
• Video ToolBox plug-ins provide additional capabilities for live image enhancement and automated measurement including GPS (stamping location and time on image) and Foot Switch software.
• Works with any DirectShow compatible video device including USB cameras, FireWire cameras, webcams and USB video frame grabbers.

Computer Requirements

• Pentium III 500 MHz or faster (Core 2 Duo processor recommended)
• Windows 2000/XP/VISTA/7/8, Internet Explorer 5.0 (or later) installed
• DirectDraw 8.1+
• 256+ MB of Free Memory, Video card with 32+ MB of video RAM, minimum 800 x 600 resolution at 16-bit (65,000 colors)
• Requires USB port for included USB keylock.

Suggested Products

• Focuslock Plugin
• Foot Switch Plugin
• GPS Plugin
• Video Averager Plugin
• Particle Analyzer Plugin

*Please note we can only ship RKI products to customers within the United States

Part Number: J197850VN

WD-17040-30 InnoCal NIST-Traceable Calibration; Pressure/Vacuum Gauge, Accuracy ?1% by Oakton

If your experiment or process relies on pressure and vacuum measurements, make sure these instruments remain precise through regular calibrations. InnoCal® performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments from:

• Gauge, Absolute and Differential Pressure from 0 to 20,000 psig (1.38 mPa)
• Vacuum from 0 to 29.2 in. Hg (986 mBar)
• Barometric pressure from 700 to 1100 mBar

We can calibrate all styles of pressure and vacuum equipment including analog/dial gauges, digital gauges, transducers and transmitters, pressure calibrators, manometers, barometers, deadweight testers, and pressure comparators.

InnoCal services all major brands of pressure equipment including Ashcroft®, WIKA®, Crystal Engineering, Fluke®, Druck, GE Sensing, Cole-Parmer®, Extech®, 3D Instruments™, and many more!

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Part Number: 34L-50-300

Part Number: J197130LM5

Part Number: 103L-313